{原创}硬盘检测心得

westlife521

最近公司内务整顿，俺的任务测试硬盘：
# format
Searching for disks...done
c0t8d0: configured with capacity of 68.35GB
AVAILABLE DISK SELECTIONS:
       0. c0t0d0
          /pci@1d,700000/scsi@4/sd@0,0
       1. c0t1d0
          /pci@1d,700000/scsi@4/sd@1,0
       2. c0t2d0
          /pci@1d,700000/scsi@4/sd@2,0
       3. c0t3d0
          /pci@1d,700000/scsi@4/sd@3,0
       4. c0t8d0
          /pci@1d,700000/scsi@4/sd@8,0
       5. c0t9d0
          /pci@1d,700000/scsi@4/sd@9,0
       6. c0t10d0
          /pci@1d,700000/scsi@4/sd@a,0
       7. c0t11d0
          /pci@1d,700000/scsi@4/sd@b,0
Specify disk (enter its number): 1
selecting c0t1d0
[disk formatted]
FORMAT MENU:
        disk       - select a disk
        type       - select (define) a disk type
        partition  - select (define) a partition table
        current    - describe the current disk
        format     - format and analyze the disk
        repair     - repair a defective sector
        label      - write label to the disk
        analyze    - surface analysis
        defect     - defect list management
        backup     - search for backup labels
        verify     - read and display labels
        save       - save new disk/partition definitions
        inquiry    - show vendor, product and revision
        volname    - set 8-character volume name
        !     - execute , then return
        quit
format> analyze
ANALYZE MENU:
        read     - read only test   (doesn't harm SunOS)
        refresh  - read then write  (doesn't harm data)
        test     - pattern testing  (doesn't harm data)
        write    - write then read      (corrupts data)
        compare  - write, read, compare (corrupts data)
        purge    - write, read, write   (corrupts data)
        verify   - write entire disk, then verify (corrupts data)
        print    - display data buffer
        setup    - set analysis parameters
        config   - show analysis parameters
        !   - execute  , then return
        quit
analyze> compare
Ready to analyze (will corrupt data). This takes a long time,
but is interruptable with CTRL-C. Continue? yes
        pass 0 - pattern = 0xc6dec6de
2/10/66   
Total of 0 defective blocks repaired.
analyze>


1、硬盘在检测完后如果提示：Total of 0 defective blocks repaired
ok 硬盘是好盘
2、format硬盘提示drive not available 报废
3、format硬盘提示type unknow  可以尝试更换硬盘控制板 说不定硬盘重获新生



本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u1/42931/showart_337330.html