igrp路由选择协议配置实例

aloneboylz

在图中两个路由器Ｒ１和Ｒ２，和两个终端ＨostA和ＨostB，要想在两个终端上相互访问，通过配置ＩＲＧＰ路由来实现，下面是配置过程：
Ｒ１的配置：
conf t
hostname Router-A
enable secret louis
enable password uibe
line console 0
password louis
login
line vty 0 4
passwork louis
login
line aux 0
password louis
login
int e 0
ip address 172.16.10.1 255.255.255.0
no shut
int s 0
ip address 172.16.20.1 255.255.255.0
clock rate 64000
no shut
exit
router igrp 10
network 172.16.10.0
network 172.16.20.0
end
用sh run 和sh ip route可以看到ＩＧＲＰ已经配置好了．

Ｒ２的配置：
conf t
hostname Router-A
enable secret louis
enable password uibe
line console 0
password louis
login
line vty 0 4
passwork louis
login
line aux 0
password louis
login
int s 0
ip address 172.16.20.2 255.255.255.0
no shut
int e 0
ip address 172.16.30.1 255.255.255.0
no shut
exit
router irgp 10
network 172.16.20.0
network 172.16.30.0
end

HostA的配置
ip address :172.16.10.2
subnet mask :255.255.255.0
default gateway:172.16.10.1

HostB的配置：
ip address :172.16.30.2
subnet mask :255.255.255.0
default gateway:172.16.30.1


这时你在HostB上ping HostA是通的，配置完成．

本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/15454/showart_220717.html