Configuring 802.1x Port-Based Authentication

knight_net

This example shows how to enable a port to allow multiple hosts:
Switch(config)# interface fastethernet0/1

Switch(config-if)# dot1x port-control auto

Switch(config-if)# dot1x host-mode multi-host
This example shows how to configure 802.1x accounting. The first command configures the RADIUS server, specifying 1813 as the UDP port for accounting:
Switch(config)# radius-server host 172.120.39.46 auth-port 1812 acct-port 1813 key rad123
Switch(config)# aaa accounting dot1x default start-stop group radius
Switch(config)# aaa accounting system default start-stop group radius


本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/33070/showart_318274.html