华为3com设备基本配置

hbtmyjt

display current-configuration    显示当前配置信息
display saved-configuration    显示启动时的配置文件
display interfaces    显示接口状态及配置信息
display local-user    显示路由器当前所有的用户信息
display version    显示系统的软件硬件状态信息，包括当前的IOS版本信息
display clock    显示系统时钟当前时间设置
display sysname    显示系统名称，主机名
display history-command    显示键入过的命令历史列表。
display arp    显示路由器的ARP地址映射对应表
system-view
sysname  root
super password level 3 cipher root
local-user root password cipher root service-type exec-administrator
telnet server enbale
radius scheme system
server-type extended
primary authentication 127.0.0.1 1645
primary accounting 127.0.0.1 1646
user-name-format without-domain
interface Ethernet0/0
port link-mode route
ip address 202.106.196.10 255.255.255.248
interface Ethernet0/1
port link-mode route
ip address 202.106.196.17 255.255.255.252
ip address 202.106.196.21 255.255.255.252 sub
interface LoopBack0
ip address 192.168.10.1 255.255.255.255
ospf 1
area 0.0.0.10
  network 202.106.196.16 0.0.0.3
  network 202.106.196.20 0.0.0.3
  network 202.106.196.8 0.0.0.7
  network 192.168.10.0 0.0.0.255
user-interface vty 0 4
set authentication password cipher baoji
user privilege level 2
authentication-mode scheme
service-type telnet ssh level 3
ip route-static 0.0.0.0 0.0.0.0 202.106.196.26
header login  
     Input banner text, and quit with the character 'l'.
              this is a switch for technology department
              switch's ip:*.*.*.*
              configure by anson at 21:13 2006-3-29
              l
vlan 3
name vlan3
interface Ethernet 0/1
duplex full
speed 100   
port link-type trunk
port trunk permit vlan all
interface Ethernet 0/2
duplex full
speed 100
port link-type trunk
port trunk permit vlan all
quit
link-aggregation Ethernet 0/1 to Ethernet 0/2 both
snmp-agent community read ****
snmp-agent sys-info version ***
snmp-agent trap enable

本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/2830/showart_403078.html