(已解决)关于Adaptec 2610 SATA阵列hotspare事宜．

gongshi

我要在2610 SATA　RAID阵列上面新加一块热备盘，原来有三块盘做好ＲＡＩＤ５，不知各位有没有关于此卡的说明书呢．
谢谢

[ 本帖最后由 gongshi 于 2008-6-14 09:47 编辑 ]

yunko

Ctrl+H吧

gongshi

已解决.


1 From the List of Arrays dialog box, select the array to which
you want to assign a hotspare, then press Ctrl+S. The Hotspare
Management for Array dialog box is displayed, which shows
the drives that can be assigned as hotspares.
2.Select a drive, then press Insert to assign the drive as a hotspare.
The specified drive is displayed in the Assigned Hotspares
drives list.
3 Press Enter to save the hotspare assignment.
4 If you are finished managing hotspares, press Y (for yes) when
prompted to return to the main menu.
多谢各位关注.

热带鱼鳞

我来支持一下！！！！！！！！！！！！！

gongshi

不是dell的，hp 150的机器．