免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
12下一页
最近访问板块 发新帖
查看: 6003 | 回复: 15
打印 上一主题 下一主题

[SCO UNIX] 请帮忙诊断netstat -m的输出 [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2003-02-09 08:45 |只看该作者 |倒序浏览
输出情况如下,请高手诊断一下可能是哪方面的问题,当时本主机网络已经瘫痪,除了ping本机以外,ping不通网关、同网段其它主机,其它主机网络正常。其它主机的应用情况是相同的。
#netstat -m
netstat: get_if_name_for_route: SIOCGIFALL: Out of stream resources
netstat: get_if_name_for_route: SIOCGIFALL: Out of stream resources
netstat: get_if_name_for_route: SIOCGIFALL: Out of stream resources
netstat: get_if_name_for_route: SIOCGIFALL: Out of stream resources
netstat: get_if_name_for_route: SIOCGIFALL: Out of stream resources
netstat: get_if_name_for_route: SIOCGIFALL: Out of stream resources
netstat: get_if_name_for_route: SIOCGIFALL: Out of stream resources
netstat: get_if_name_for_route: SIOCGIFALL: Out of stream resources
netstat: get_if_name_for_route: SIOCGIFALL: Out of stream resources
netstat: get_if_name_for_route: SIOCGIFALL: Out of stream resources
netstat: get_if_name_for_route: SIOCGIFALL: Out of stream resources
netstat: get_if_name_for_route: SIOCGIFALL: Out of stream resources
netstat: get_if_name_for_route: SIOCGIFALL: Out of stream resources
streams allocation:
                               config   alloc     free       total      max     fail
stream                     8192    150     8042        2957      185        0
queues                      794    307      487        6716      380        0
mblks                       3172    1658     1514     8523726     3008        0
buffer headers         3130    2036     1094     1904690     3052        0
class  1,     64 bytes   128       42       86     1448701       85        0
class  2,    128 bytes   818      725       93     1013416      818        0
class  3,    256 bytes   131        8      123      784797      129        0
class  4,    512 bytes     10        6        4       35484          10        0
class  5,   1024 bytes    72        0        72    20747         71      0
class  6,   2048 bytes  784      784      0        801871  860     3773
class  7,   4096 bytes        2        2        0           2        2        0
class  8,   8192 bytes        0        0        0          16        1        0
class  9,  16384 bytes        0        0        0           1        1        0
class 10,  32768 bytes        0        0        0           0        0        0
class 11,  65536 bytes        0        0        0           0        0        0
class 12, 131072 bytes        0        0        0           0        0        0
class 13, 262144 bytes        0        0        0           0        0        0
class 14, 524288 bytes        0        0        0           0        0        0
total configured streams memory: 2000.00KB
streams memory in use: 1774.12KB
maximum streams memory used: 2122.11KB

论坛徽章:
0
2 [报告]
发表于 2003-02-09 09:02 |只看该作者

请帮忙诊断netstat -m的输出

一般操作:换网线、换交换机ethernet口or reboot

论坛徽章:
0
3 [报告]
发表于 2003-02-09 09:47 |只看该作者

请帮忙诊断netstat -m的输出

谢谢,当然reboot可以暂时解决这个问题,但是会重现。我初步怀疑是应用程序造成的,各位请注意:
----------config--alloc--free----- total--max----fail
class 6, 2048 bytes--784---784------0--801871--860--3773
这里有很多的fail,free项为0,各位帮我分析一下造成这个问题的可能原因。我初步怀疑是应用程序造成的。因为我一时找不到相应资料,如果谁能详细解释一下netstat -m输出各项的意义,我不胜感谢。

论坛徽章:
0
4 [报告]
发表于 2003-02-09 09:48 |只看该作者

请帮忙诊断netstat -m的输出

网络出于什么原因瘫痪的?为什么?
你的网络、OS 环境又如何?

论坛徽章:
0
5 [报告]
发表于 2003-02-09 09:51 |只看该作者

请帮忙诊断netstat -m的输出

ft ag,如果我确切知道是什么原因造成网络瘫痪,我就不着急了。OS是SCO UNIX 5.
05,通过中间件与远端主机大量通讯。

论坛徽章:
0
6 [报告]
发表于 2003-02-09 11:08 |只看该作者

请帮忙诊断netstat -m的输出

你的最后3行好像有问题!
建议用netstat -a -m看看!

论坛徽章:
0
7 [报告]
发表于 2003-04-12 02:17 |只看该作者

请帮忙诊断netstat -m的输出

我也很想知道netstat -m输出各项的意义,那位老大可以解释请站出来吧

论坛徽章:
0
8 [报告]
发表于 2003-04-12 20:26 |只看该作者

请帮忙诊断netstat -m的输出

我的机器也是相同问题.
根据网络上的一些文件解释,
大部份说法都是 STREAM page 不够大
即使将
total configured streams memory: 2000.00KB
加大为8000.00KB 或 16000.00KB
当maximum streams memory used:
到达跟上面数字接近时,一样会发生ping得到本机,
ping 不到其它网内其它计算机的情况.

我的问题跟 坏蛋 与kinks 相同
等待高人帮忙解答
(我是使用 intel pro/100s 网卡)

论坛徽章:
0
9 [报告]
发表于 2003-04-14 18:15 |只看该作者

请帮忙诊断netstat -m的输出

如果增加用户数,total configured streams memory会自动调大,这个参数是有限制的,太大的话不能链接核心。我试过一台主机加到600用户,就出了问题。对于一般的应用来说,其实缺省参数也可以了的。建议楼上的网友一是适当改大该参数,二是主要还是要仔细分析应用是否存在问题。

论坛徽章:
0
10 [报告]
发表于 2003-04-14 21:44 |只看该作者

请帮忙诊断netstat -m的输出

第一个方法,应该同我加大NSTRPAGE一样结果
我想,我的问题是正常情况下,
maximum streams memory used
不是会动态分配吗? 使用完后会再自动配置的吧!?
但一直累积下去 结果就塞爆了total configured streams memory
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP