- 论坛徽章:
- 0
|
Starting RTC ..
Sun Blade 2500, No Keyboard
Copyright 1998-2003 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.9.7, 4096 MB memory installed, Serial #63805758.
Ethernet address 0:3:ba:cd:99:3e, Host ID: 83cd993e.
Boot device: disk:a File and args:
SunOS Release 5.8 Version Generic_117350-02 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
WARNING: Last shutdown is later than time on time-of-day chip; check date.
configuring IPv4 interfaces: bge0.
Hostname: B2500
The system is coming up. Please wait.
WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
failed to initialize adapter
WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
failed to initialize adapter
checking ufs filesystems
WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
failed to initialize adapter
/dev/rdsk/c3t112d0s6: No such device or address
WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
failed to initialize adapter
Can't open /dev/rdsk/c3t112d0s6
/dev/rdsk/c3t112d0s6: CAN'T CHECK FILE SYSTEM.
/dev/rdsk/c3t112d0s6: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
failed to initialize adapter
/dev/rdsk/c3t112d1s6: No such device or address
WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
failed to initialize adapter
Can't open /dev/rdsk/c3t112d1s6
/dev/rdsk/c3t112d1s6: CAN'T CHECK FILE SYSTEM.
/dev/rdsk/c3t112d1s6: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
WARNING - Unable to repair one or more filesystems.
Run fsck manually (fsck filesystem...).
Exit the shell when done to continue the boot process.
Type control-d to proceed with normal startup,
(or give root password for system maintenance): resuming mountall
mount: the state of /dev/dsk/c0t0d0s7 is not okay
and it was attempted to be mounted read/write
mount: Please run fsck and try again
WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
failed to initialize adapter
mount: /dev/dsk/c3t112d0s6 no such device
WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
failed to initialize adapter
mount: /dev/dsk/c3t112d1s6 no such device
Starting IPv4 routing daemon.
starting rpc services: rpcbind done.
Setting netmask of bge0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway B2500
syslog service starting.
Print services started.
Sourcing //.profile-EIS.....
Moving old /usr/tmp/license_log to /usr/tmp/license_log.old.000101080134
Starting License Manager Daemon lmgrd.ste
Jan 1 08:01:34 B2500 sendmail[258]: My unqualified host name (B2500) unknown; sleeping for retry
volume management starting.
add net default: gateway 10.70.155.1
Jan 1 08:01:35 B2500 qlc: WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
Jan 1 08:01:35 B2500 failed to initialize adapter
Jan 1 08:01:35 B2500 qlc: WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
Jan 1 08:01:35 B2500 failed to initialize adapter
share_nfs: /home/install-8: No such file or directory
/etc/rc3.d/S99cgg: /cgg/jobmgr/admin/gvrstart: not found
No directory!
No directory!
/etc/rc3.d/S99promax: /home/lam/bin/lmgrd: not found
The system is ready.
B2500 console login: root
Password:
Last login: Sat Jan 1 12:24:28 from :0
Jan 1 08:01:41 B2500 login: ROOT LOGIN /dev/console
Sun Microsystems Inc. SunOS 5.8 Generic Patch February 2004
You have mail.
Sourcing //.profile-EIS.....
root@B2500 # cd /var/adm
root@B2500 # ls
acct lgcrpt.log messages.1 sa sulog wtmpx
aculog log messages.2 sm.bin tp_acct
exacct messages messages.3 spellhist utmpx
lastlog messages.0 passwd streams vold.log
root@B2500 # more messages
Jun 15 10:09:00 B2500 pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
Jun 15 10:09:00 B2500 genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0
Jun 15 10:11:42 B2500 pcisch: [ID 370704 kern.info] PCI-device: card-reader@40, scmi2c0
Jun 15 10:11:42 B2500 genunix: [ID 936769 kern.info] scmi2c0 is /pci@1e,600000/pmu@6/i2c@0,0/card-reader@40
Jun 15 10:11:42 B2500 pseudo: [ID 129642 kern.info] pseudo-device: fssnap0
Jun 15 10:11:42 B2500 genunix: [ID 936769 kern.info] fssnap0 is /pseudo/fssnap@0Jun 15 10:11:42 B2500 pseudo: [ID 129642 kern.info] pseudo-device: lockstat0
Jun 15 10:11:42 B2500 genunix: [ID 936769 kern.info] lockstat0 is /pseudo/lockstat@0
Jun 15 10:11:42 B2500 pseudo: [ID 129642 kern.info] pseudo-device: llc10
Jun 15 10:11:42 B2500 genunix: [ID 936769 kern.info] llc10 is /pseudo/llc1@0
Jun 15 10:11:42 B2500 pseudo: [ID 129642 kern.info] pseudo-device: tod0
Jun 15 10:11:42 B2500 genunix: [ID 936769 kern.info] tod0 is /pseudo/tod@0
Jun 15 10:11:42 B2500 pseudo: [ID 129642 kern.info] pseudo-device: lofi0
Jun 15 10:11:42 B2500 genunix: [ID 936769 kern.info] lofi0 is /pseudo/lofi@0
Jun 15 10:11:43 B2500 pcisch: [ID 370704 kern.info] PCI-device: sound@8, audiots0
Jun 15 10:11:43 B2500 genunix: [ID 936769 kern.info] audiots0 is /pci@1e,600000/sound@8
Jun 15 10:11:43 B2500 pseudo: [ID 129642 kern.info] pseudo-device: rsm0
Jun 15 10:11:43 B2500 genunix: [ID 936769 kern.info] rsm0 is /pseudo/rsm@0
Jun 15 10:11:43 B2500 pseudo: [ID 129642 kern.info] pseudo-device: rmcadm0
Jun 15 10:11:43 B2500 genunix: [ID 936769 kern.info] rmcadm0 is /pseudo/rmcadm@0Jun 15 10:11:43 B2500 ebus: [ID 521012 kern.info] ecpp0 at ebus0: offset 0,378
Jun 15 10:11:43 B2500 genunix: [ID 936769 kern.info] ecpp0 is /pci@1e,600000/isa@7/dma@0,0/parallel@0,378
Jun 15 10:11:43 B2500 pseudo: [ID 129642 kern.info] pseudo-device: wrsmd0
Jun 15 10:11:43 B2500 genunix: [ID 936769 kern.info] wrsmd0 is /pseudo/wrsmd@0
Jun 15 10:11:43 B2500 pseudo: [ID 129642 kern.info] pseudo-device: wrsmd1
Jun 15 10:11:43 B2500 genunix: [ID 936769 kern.info] wrsmd1 is /pseudo/wrsmd@1
Jun 15 10:11:43 B2500 pseudo: [ID 129642 kern.info] pseudo-device: wrsmd2
Jun 15 10:11:43 B2500 genunix: [ID 936769 kern.info] wrsmd2 is /pseudo/wrsmd@2
Jun 15 10:11:43 B2500 pseudo: [ID 129642 kern.info] pseudo-device: wrsmd3
Jun 15 10:11:43 B2500 genunix: [ID 936769 kern.info] wrsmd3 is /pseudo/wrsmd@3
Jun 15 10:11:43 B2500 pseudo: [ID 129642 kern.info] pseudo-device: wrsmd4
Jun 15 10:11:43 B2500 genunix: [ID 936769 kern.info] wrsmd4 is /pseudo/wrsmd@4
Jun 15 10:11:43 B2500 pseudo: [ID 129642 kern.info] pseudo-device: wrsmd5
Jun 15 10:11:43 B2500 genunix: [ID 936769 kern.info] wrsmd5 is /pseudo/wrsmd@5
Jun 15 10:11:43 B2500 pseudo: [ID 129642 kern.info] pseudo-device: wrsmd6
Jun 15 10:11:43 B2500 genunix: [ID 936769 kern.info] wrsmd6 is /pseudo/wrsmd@6
Jun 15 10:11:43 B2500 pseudo: [ID 129642 kern.info] pseudo-device: wrsmd7
Jun 15 10:11:43 B2500 genunix: [ID 936769 kern.info] wrsmd7 is /pseudo/wrsmd@7
Jun 15 10:11:43 B2500 pseudo: [ID 129642 kern.info] pseudo-device: wrsmd8
Jun 15 10:11:43 B2500 genunix: [ID 936769 kern.info] wrsmd8 is /pseudo/wrsmd@8
Jun 15 10:11:43 B2500 pseudo: [ID 129642 kern.info] pseudo-device: wrsmd9
Jun 15 10:11:43 B2500 genunix: [ID 936769 kern.info] wrsmd9 is /pseudo/wrsmd@9
Jun 15 10:11:43 B2500 pseudo: [ID 129642 kern.info] pseudo-device: wrsmd10
Jun 15 10:11:43 B2500 genunix: [ID 936769 kern.info] wrsmd10 is /pseudo/wrsmd@10Jun 15 10:11:43 B2500 pseudo: [ID 129642 kern.info] pseudo-device: wrsmd11
Jun 15 10:11:43 B2500 genunix: [ID 936769 kern.info] wrsmd11 is /pseudo/wrsmd@11Jun 15 10:11:43 B2500 pseudo: [ID 129642 kern.info] pseudo-device: wrsmd12
Jun 15 10:11:43 B2500 genunix: [ID 936769 kern.info] wrsmd12 is /pseudo/wrsmd@12Jun 15 10:11:43 B2500 pseudo: [ID 129642 kern.info] pseudo-device: wrsmd13
Jun 15 10:11:43 B2500 genunix: [ID 936769 kern.info] wrsmd13 is /pseudo/wrsmd@13Jun 15 10:11:43 B2500 pseudo: [ID 129642 kern.info] pseudo-device: wrsmd14
Jun 15 10:11:43 B2500 genunix: [ID 936769 kern.info] wrsmd14 is /pseudo/wrsmd@14Jun 15 10:11:43 B2500 pseudo: [ID 129642 kern.info] pseudo-device: wrsmd15
Jun 15 10:11:43 B2500 genunix: [ID 936769 kern.info] wrsmd15 is /pseudo/wrsmd@15Jun 15 10:11:43 B2500 pseudo: [ID 129642 kern.info] pseudo-device: fcsm0
Jun 15 10:11:43 B2500 genunix: [ID 936769 kern.info] fcsm0 is /pseudo/fcsm@0
path capabilities are disabled through driver configuration file.si_vhci0) multi--More--(5%)
Jun 17 13:08:00 B2500 pcf8584: [ID 318190 kern.warning] WARNING: i2c_0 lost arbitration; Controller = 0x304321 addr = 0x5c
Jun 17 13:08:00 B2500 pcf8584: [ID 667491 kern.warning] WARNING: i2c_0 bus busy even after initializing addr=0x5c
Jun 17 13:08:02 B2500 pcf8584: [ID 587602 kern.warning] WARNING: i2c_0: bus busy cleared after initializing. addr=0x58
Jun 17 14:40:23 B2500 bge: [ID 801593 kern.notice] NOTICE: bge0: link down
Jun 17 16:46:20 B2500 bge: [ID 801593 kern.notice] NOTICE: bge0: link up 1000Mbps Full-Duplex
42 kern.info] pseudo-device: ppm0
Oct 30 08:31:41 B2500 genunix: [ID Jan 1 11:24:53 B2500 genunix: [ID 540533 kern.notice] ^MSunOS Release 5.8 Version Generic_117350-02 64-bit
Jan 1 11:24:53 B2500 genunix: [ID 913632 kern.notice] Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Jan 1 11:24:53 B2500 genunix: [ID 678236 kern.info] Ethernet address = 0:3:ba:cd:99:3e
Jan 1 11:24:53 B2500 unix: [ID 389951 kern.info] mem = 4194304K (0x100000000)
Jan 1 11:24:53 B2500 unix: [ID 930857 kern.info] avail mem = 4115841024
Jan 1 11:24:53 B2500 rootnex: [ID 466748 kern.info] root nexus = Sun Blade 2500Jan 1 11:24:53 B2500 rootnex: [ID 349649 kern.info] pcisch0 at root: SAFARI 0x1e 0x600000
Jan 1 11:24:53 B2500 genunix: [ID 936769 kern.info] pcisch0 is /pci@1e,600000
Jan 1 11:24:53 B2500 pcisch: [ID 370704 kern.info] PCI-device: pmu@6, pmubus0
Jan 1 11:24:53 B2500 pcisch: [ID 370704 kern.info] PCI-device: ppm@0,b3, m1535ppm0
Jan 1 11:24:53 B2500 genunix: [ID 936769 kern.info] m1535ppm0 is /pci@1e,600000/pmu@6/ppm@0,b3
Jan 1 11:24:53 B2500 rootnex: [ID 349649 kern.info] tomtppm0 at root: SAFARI 0x1c 0x0
Jan 1 11:24:53 B2500 genunix: [ID 936769 kern.info] tomtppm0 is /ppm@1c,0
1e 0x0
Jan 1 11:24:53 B2500 genunix: [ID 936769 kern.info] tomtppm1 is /ppm@1e,0
Jan 1 11:24:53 B2500 pcisch: [ID 370704 kern.info] PCI-device: isa@7, ebus0
Jan 1 11:24:53 B2500 rootnex: [ID 349649 kern.info] pcisch1 at root: SAFARI 0x1c 0x600000
Jan 1 11:24:53 B2500 genunix: [ID 936769 kern.info] pcisch1 is /pci@1c,600000
Jan 1 11:24:53 B2500 rootnex: [ID 349649 kern.info] pcisch2 at root: SAFARI 0x1d 0x700000
Jan 1 11:24:53 B2500 genunix: [ID 936769 kern.info] pcisch2 is /pci@1d,700000
Jan 1 11:24:53 B2500 rootnex: [ID 349649 kern.info] pcisch3 at root: SAFARI 0x1f 0x700000
Jan 1 11:24:53 B2500 genunix: [ID 936769 kern.info] pcisch3 is /pci@1f,700000
Jan 1 11:24:53 B2500 pseudo: [ID 129642 kern.info] pseudo-device: ppm0
Jan 1 11:24:53 B2500 genunix: [ID 936769 kern.info] ppm0 is /pseudo/ppm@0
Jan 1 11:24:53 B2500 scsi: [ID 365881 kern.info] /pci@1d,700000/scsi@4 (glm0):
Jan 1 11:24:53 B2500 glm0 supports power management.
Jan 1 11:24:53 B2500 scsi: [ID 365881 kern.info] /pci@1d,700000/scsi@4 (glm0):
Jan 1 11:24:53 B2500 Rev. 0 Symbios 53c1010-33/66 found.
Jan 1 11:24:53 B2500 pcisch: [ID 370704 kern.info] PCI-device: scsi@4, glm0
Jan 1 11:24:53 B2500 genunix: [ID 936769 kern.info] glm0 is /pci@1d,700000/scsi@4
Jan 1 11:24:53 B2500 scsi: [ID 365881 kern.info] /pci@1d,700000/scsi@4,1 (glm1):
Jan 1 11:24:53 B2500 glm1 supports power management.
Jan 1 11:24:53 B2500 scsi: [ID 365881 kern.info] /pci@1d,700000/scsi@4,1 (glm1):
Jan 1 11:24:53 B2500 Rev. 0 Symbios 53c1010-33/66 found.
Jan 1 11:24:53 B2500 pcisch: [ID 370704 kern.info] PCI-device: scsi@4,1, glm1
Jan 1 11:24:53 B2500 genunix: [ID 936769 kern.info] glm1 is /pci@1d,700000/scsi@4,1
Jan 1 11:25:06 B2500 pcisch: [ID 370704 kern.info] PCI-device: ide@d, uata0
@d
Jan 1 11:25:06 B2500 scsi: [ID 193665 kern.info] sd30 at uata0: target 2 lun 0
Jan 1 11:25:06 B2500 genunix: [ID 936769 kern.info] sd30 is /pci@1e,600000/ide@d/sd@2,0
Jan 1 11:25:06 B2500 scsi: [ID 193665 kern.info] sd0 at glm0: target 0 lun 0
Jan 1 11:25:06 B2500 genunix: [ID 936769 kern.info] sd0 is /pci@1d,700000/scsi@4/sd@0,0
Jan 1 11:25:06 B2500 scsi: [ID 365881 kern.info] <SUN146G cyl 14087 alt 2 hd 24 sec 848>
Jan 1 11:25:11 B2500 swapgeneric: [ID 308332 kern.info] root on /pci@1d,700000/scsi@4/disk@0,0:a fstype ufs
Jan 1 11:25:11 B2500 ebus: [ID 521012 kern.info] power0 at ebus0: offset 0,800
Jan 1 11:25:11 B2500 genunix: [ID 936769 kern.info] power0 is /pci@1e,600000/isa@7/power@0,800
Jan 1 11:25:11 B2500 rootnex: [ID 349649 kern.info] us0 at root: SAFARI 0x0 0x0 ...
Jan 1 11:25:11 B2500 rootnex: [ID 349649 kern.info] us1 at root: SAFARI 0x1 0x0 ...
Jan 1 11:25:11 B2500 rootnex: [ID 349649 kern.info] mc-us3i0 at root: SAFARI 0x0 0x0 ...
Jan 1 11:25:11 B2500 genunix: [ID 936769 kern.info] mc-us3i0 is /memory-controller@0,0
Jan 1 11:25:11 B2500 rootnex: [ID 349649 kern.info] mc-us3i1 at root: SAFARI 0x1 0x0 ...
Jan 1 11:25:11 B2500 genunix: [ID 936769 kern.info] mc-us3i1 is /memory-controller@1,0
Jan 1 11:25:11 B2500 pcisch: [ID 370704 kern.info] PCI-device: usb@a, ohci0
Jan 1 11:25:11 B2500 genunix: [ID 936769 kern.info] ohci0 is /pci@1e,600000/usb@a
Jan 1 11:25:11 B2500 pcisch: [ID 370704 kern.info] PCI-device: usb@b, ohci1
Jan 1 11:25:11 B2500 genunix: [ID 936769 kern.info] ohci1 is /pci@1e,600000/usb@b
root@B2500 # init 5
*****************************************************************************
*
* Starting Desktop Login on display :0...
*
* Wait for the Desktop Login screen before logging in.
*
*****************************************************************************
*****************************************************************************
*
* The X-server can not be started on display :0...
*
*****************************************************************************
root@B2500 #
INIT: New run level: 5
The system is coming down. Please wait.
System services are now being stopped.
Print services stopped.
Jan 1 08:02:14 B2500 syslogd: going down on signal 15
The system is down.
syncing file systems... done
Program terminated
{0} ok
Error: I2C transfer failed
config:
Error: I2C transfer failed
config:
Error: I2C transfer failed
config:
Error: I2C transfer failed
config:
Error: I2C transfer failed
config:
@(#)OBP 4.9.7 2004/05/27 07:31 Sun Blade 2500
Clearing TLBs
Power-On Reset
Executing Power On SelfTest
0>@(#) Sun Blade[TM] 2500 POST 4.9.4 2003/06/18 12:25
/export/common-source/firmware_re/post/post-build-4.9.4/Fiesta/enchilada/integrated (firmware_re)
0>Hard Powerup RST thru SW
0>CPUs present in system: 0 1
0>OBP->OST Call with %o0=00000000.01ff2000.
0>Diag level set to MIN.
0>I/O port set to TTYA.
0>
0>Start selftest...
0>Init SB
0>Init CPU
0>DMMU
0>DMMU TLB DATA RAM Access
0>DMMU TLB TAGS Access
0>IMMU Registers Access
0>IMMU TLB DATA RAM Access
0>IMMU TLB TAGS Access
0>Init mmu regs
0>Setup Ecache
0>Ecache control = 00000000.00f04400
0> Size = 00000000.00100000...
0>Scrub and Setup Ecache
0>Setup and Enable DMMU
0>Setup DMMU Miss Handler
0>Test and Init Temp Mailbox
0>CPU Tick and Tick Compare Registers Test
0>CPU Stick and Stick Compare Registers Test
0>Set Timing
0> UltraSPARC[TM] IIIi, Version 2.4
1>Init CPU
1> UltraSPARC[TM] IIIi, Version 2.4
1>DMMU
1>DMMU TLB DATA RAM Access
1>DMMU TLB TAGS Access
1>IMMU Registers Access
1>IMMU TLB DATA RAM Access
1>IMMU TLB TAGS Access
1>Init mmu regs
1>Setup Ecache
1>Ecache control = 00000000.00f04400
1> Size = 00000000.00100000...
1>Scrub and Setup Ecache
1>Setup and Enable DMMU
1>Setup DMMU Miss Handler
1>Test and Init Temp Mailbox
1>CPU Tick and Tick Compare Registers Test
1>CPU Stick and Stick Compare Registers Test
1>Setup Int Handlers
0>Setup Int Handlers
0>Send Int CPU 1
1>Send Int to Master CPU
0>Initialize I2C Controller
0>
0>ERROR: TEST = Initialize I2C Controller
0>H/W under test = Motherboard I2C
0>Repair Instructions: Replace items in order listed by 'H/W under test' above
0>MSG = Unable to initialize IMAX
0>END_ERROR
0>
0>ERROR: TEST = Initialize I2C Controller
0>H/W under test = Motherboard I2C
0>Repair Instructions: Replace items in order listed by 'H/W under test' above
0>MSG =
*** Test Failed!! ***
0>END_ERROR
0>
0>ERROR: TEST = Environment Setup
0>H/W under test = Motherboard I2C
0>Repair Instructions: Replace items in order listed by 'H/W under test' above
0>MSG =
*** Test Failed!! ***
0>END_ERROR
0>MB: Set CPU/System Speed
0>
0>ERROR: TEST = Set CPU/System Speed
0>H/W under test = Motherboard (I2C)
Sun Blade 2500, No Keyboard
Copyright 1998-2003 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.9.7, 4096 MB memory installed, Serial #63805758.
Ethernet address 0:3:ba:cd:99:3e, Host ID: 83cd993e.
Boot device: disk:a File and args:
SunOS Release 5.8 Version Generic_117350-02 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
configuring IPv4 interfaces: bge0.
Hostname: B2500
The system is coming up. Please wait.
WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
failed to initialize adapter
WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
failed to initialize adapter
checking ufs filesystems
WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
failed to initialize adapter
/dev/rdsk/c3t112d0s6: No such device or address
WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
failed to initialize adapter
Can't open /dev/rdsk/c3t112d0s6
/dev/rdsk/c3t112d0s6: CAN'T CHECK FILE SYSTEM.
/dev/rdsk/c3t112d0s6: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
failed to initialize adapter
/dev/rdsk/c3t112d1s6: No such device or address
WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
failed to initialize adapter
Can't open /dev/rdsk/c3t112d1s6
/dev/rdsk/c3t112d1s6: CAN'T CHECK FILE SYSTEM.
/dev/rdsk/c3t112d1s6: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
WARNING - Unable to repair one or more filesystems.
Run fsck manually (fsck filesystem...).
Exit the shell when done to continue the boot process.
Type control-d to proceed with normal startup,
(or give root password for system maintenance):
Login incorrect
Type control-d to proceed with normal startup,
(or give root password for system maintenance): resuming mountall
mount: the state of /dev/dsk/c0t0d0s7 is not okay
and it was attempted to be mounted read/write
mount: Please run fsck and try again
WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
failed to initialize adapter
mount: /dev/dsk/c3t112d0s6 no such device
WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
failed to initialize adapter
mount: /dev/dsk/c3t112d1s6 no such device
Starting IPv4 routing daemon.
starting rpc services: rpcbind done.
Setting netmask of bge0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway B2500
syslog service starting.
Print services started.
Sourcing //.profile-EIS.....
Moving old /usr/tmp/license_log to /usr/tmp/license_log.old.000101081251
Starting License Manager Daemon lmgrd.ste
Jan 1 08:12:51 B2500 sendmail[257]: My unqualified host name (B2500) unknown; sleeping for retry
volume management starting.
add net default: gateway 10.70.155.1
Jan 1 08:12:52 B2500 qlc: WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
Jan 1 08:12:52 B2500 failed to initialize adapter
Jan 1 08:12:52 B2500 qlc: WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
Jan 1 08:12:52 B2500 failed to initialize adapter
share_nfs: /home/install-8: No such file or directory
/etc/rc3.d/S99cgg: /cgg/jobmgr/admin/gvrstart: not found
No directory!
No directory!
/etc/rc3.d/S99promax: /home/lam/bin/lmgrd: not found
The system is ready.
B2500 console login:
*****************************************************************************
*
* Starting Desktop Login on display :0...
*
* Wait for the Desktop Login screen before logging in.
*
*****************************************************************************
*****************************************************************************
*
* The X-server can not be started on display :0...
*
*****************************************************************************
root
Password:
Jan 1 08:13:02 B2500 login: ROOT LOGIN /dev/console
Last login: Sat Jan 1 08:01:41 on console
Sun Microsystems Inc. SunOS 5.8 Generic Patch February 2004
You have mail.
Sourcing //.profile-EIS.....
root@B2500 #
root@B2500 # devfsadm -C
Jan 1 08:13:12 B2500 qlc: WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
Jan 1 08:13:12 B2500 failed to initialize adapter
Jan 1 08:13:15 B2500 qlc: WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
Jan 1 08:13:15 B2500 failed to initialize adapter
Jan 1 08:13:21 B2500 qlc: WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
Jan 1 08:13:21 B2500 failed to initialize adapter
Jan 1 08:13:21 B2500 qlc: WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
Jan 1 08:13:21 B2500 failed to initialize adapter
Jan 1 08:13:21 B2500 qlc: WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
Jan 1 08:13:21 B2500 failed to initialize adapter
Jan 1 08:13:22 B2500 qlc: WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
Jan 1 08:13:22 B2500 failed to initialize adapter
Jan 1 08:13:22 B2500 audiosup: WARNING: audiots0:The audio AC97 register has timed out.
Jan 1 08:13:22 B2500 audiosup: audiots0:Audio is now disabled.
Jan 1 08:13:22 B2500 audiosup: audiots0lease reboot to restore audio.
Jan 1 08:13:51 B2500 sendmail[257]: [ID 702911 mail.alert] unable to qualify my own domain name (B2500) -- using short name
Jan 1 08:13:51 B2500 sendmail[257]: unable to qualify my own domain name (B2500) -- using short name
Jan 1 08:14:00 B2500 audiosup: WARNING: audiots0:Unable to change the audio device format.
Jan 1 08:14:00 B2500 audiosup: audiots0:The audio hardware has been disabled.
Jan 1 08:14:00 B2500 audiosup: audiots0lease reboot to restore audio.
Jan 1 08:14:00 B2500 audiosup: WARNING: audiots0:am_attach() couldn't set play data format: 0 2 16 3
Jan 1 08:14:01 B2500 qlc: WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
Jan 1 08:14:01 B2500 failed to initialize adapter
^CJan 1 08:14:06 B2500 qlc: WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
Jan 1 08:14:06 B2500 failed to initialize adapter
Jan 1 08:14:08 B2500 qlc: WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
Jan 1 08:14:08 B2500 failed to initialize adapter
^D
^Z
^CJan 1 08:14:13 B2500 qlc: WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
Jan 1 08:14:13 B2500 failed to initialize adapter
Ja^CJan 1 08:14:13 B2500 failed to initialize adapter
Jan 1 08:14:14 B2500 qlc: WARNI^CJan 1 08:14:14 B2500 qlc: WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
Jan 1 08:14:14 B2500 failed to initialize adapter
Jan 1 08:14:14 B2500 audiosup: WARNING: audiots0:The audio AC97 register has timed out.
Jan 1 08:14:14 B2500 audiosup: audiots0:Audio is now disabled.
Jan 1 08:14:14 B2500 audiosup: audiots0lease reboot to restore audio.
^D
^C^C^C^C
^C^C^C^C^C^C^C^C
^Z^Z^Z
power-off
Jan 1 08:14:52 B2500 audiosup: WARNING: audiots0:Unable to change the audio device format.
Jan 1 08:14:52 B2500 audiosup: audiots0:The audio hardware has been disabled.
Jan 1 08:14:52 B2500 audiosup: audiots0lease reboot to restore audio.
Jan 1 08:14:52 B2500 audiosup: WARNING: audiots0:am_attach() couldn't set play data format: 0 2 16 3
Jan 1 08:14:52 B2500 qlc: WARNING: Qlogic qlc(1): /pci@1c,600000/fibre-channel@2
Jan 1 08:14:52 B2500 failed to initialize adapter
^C^C^C^Z^Z^XINITSH: /usr/sbin/shutdown: not found
@(#)OBP 4.9.7 2004/05/27 07:31 Sun Blade 2500
Clearing TLBs
Loading Configuration
Membase: 0000.0013.0000.0000
MemSize: 0000.0000.4000.0000
Init CPU arrays Done
Init E$ tags Done
Setup TLB Done
MMUs ON
Scrubbing Tomatillo tags... 0 1
Block Scrubbing Done
Find dropin, Copying Done, Size 0000.0000.0000.56e0
PC = 0000.07ff.f000.4700
PC = 0000.0000.0000.4778
Find dropin, (copied), Decompressing Done, Size 0000.0000.0006.0920
ttya initialized
System Reset: CPU Reset
JBUS-PCI bridge
JBUS-PCI bridge
Probing jbus at 0,0 SUNW,UltraSPARC-IIIi (1280 MHz @ 8:1, 1 MB)
memory-controller
Probing jbus at 1,0 SUNW,UltraSPARC-IIIi (1280 MHz @ 8:1, 1 MB)
memory-controller
Probing jbus at 1c,0 pci ppm
Probing jbus at 1d,0 pci
Probing jbus at 1e,0 pci ppm
Probing jbus at 1f,0 pci i2c
Loading Support Packages: kbd-translator obp-tftp SUNW,i2c-ram-device
SUNW,fru-device
Loading onboard drivers:
Probing /pci@1e,600000 Device 7 isa flashprom rtc i2c power serial
serial dma parallel
Environmental Monitor Disabled: init failed
WARNING: Cannot get Board Part# from Motherboard FRUPROM
Using default SUNW,375-XXXX
Fast Data Access MMU Miss
debug:
@(#)OBP 4.9.7 2004/05/27 07:31 Sun Blade 2500
Clearing TLBs
Power-On Reset
Executing Power On SelfTest
0>@(#) Sun Blade[TM] 2500 POST 4.9.4 2003/06/18 12:25
/export/common-source/firmware_re/post/post-build-4.9.4/Fiesta/enchilada/integrated (firmware_re)
0>Hard Powerup RST thru SW
0>CPUs present in system: 0 1
0>OBP->OST Call with %o0=00000000.01ff2000.
0>Diag level set to MIN.
0>I/O port set to TTYA.
0>
0>Start selftest...
0>Init SB
0>Init CPU
0>DMMU
0>DMMU TLB DATA RAM Access
0>DMMU TLB TAGS Access
0>IMMU Registers Access
0>IMMU TLB DATA RAM Access
0>IMMU TLB TAGS Access
0>Init mmu regs
0>Setup Ecache
0>Ecache control = 00000000.00f04400
0> Size = 00000000.00100000...
0>Scrub and Setup Ecache
0>Setup and Enable DMMU
0>Setup DMMU Miss Handler
0>Test and Init Temp Mailbox
0>CPU Tick and Tick Compare Registers Test
0>CPU Stick and Stick Compare Registers Test
0>Set Timing
0> UltraSPARC[TM] IIIi, Version 2.4
1>Init CPU
1> UltraSPARC[TM] IIIi, Version 2.4
1>DMMU
1>DMMU TLB DATA RAM Access
1>DMMU TLB TAGS Access
1>IMMU Registers Access
1>IMMU TLB DATA RAM Access
1>IMMU TLB TAGS Access
1>Init mmu regs
1>Setup Ecache
1>Ecache control = 00000000.00f04400
1> Size = 00000000.00100000...
1>Scrub and Setup Ecache
1>Setup and Enable DMMU
1>Setup DMMU Miss Handler
1>Test and Init Temp Mailbox
1>CPU Tick and Tick Compare Registers Test
1>CPU Stick and Stick Compare Registers Test
1>Setup Int Handlers
0>Setup Int Handlers
0>Send Int CPU 1
1>Send Int to Master CPU
0>Initialize I2C Controller
0>
0>ERROR: TEST = Initialize I2C Controller
0>H/W under test = Motherboard I2C
0>Repair Instructions: Replace items in order listed by 'H/W under test' above
0>MSG = Unable to initialize IMAX
0>END_ERROR
0>
0>ERROR: TEST = Initialize I2C Controller
0>H/W under test = Motherboard I2C
0>Repair Instructions: Replace items in order listed by 'H/W under test' above
0>MSG =
*** Test Failed!! ***
0>END_ERROR
0>
0>ERROR: TEST = Environment Setup
0>H/W under test = Motherboard I2C
0>Repair Instructions: Replace items in order listed by 'H/W under test' above
0>MSG =
*** Test Failed!! ***
0>END_ERROR
0>MB: Set CPU/System Speed
0>
0>ERROR: TEST = Set CPU/System Speed
0>H/W under test = Motherboard (I2C)
0>Repair Instructions: Replace items in order listed by 'H/W under test' above
0>MSG =
*** Test Failed!! ***
0>END_ERROR
0>Send MC Timing CPU 1
0>robe Dimms
1>robe Dimms
1>Init Mem Con |
|