求助:如何在程序中调用GCC make,并把make输出信息显示出来?类似AVR_STUDIO.

ATmega32

求助:如何在程序中调用GCC make,并把make输出信息显示出来?类似AVR_STUDIO.

String sCommandLine;
DWORD dwExitCode;
PROCESS_INFORMATION pi;
STARTUPINFO si;
SECURITY_ATTRIBUTES sa = {sizeof(sa), NULL, TRUE};
memset(&si, 0, sizeof(si));
si.cb = sizeof(si);
si.dwFlags = STARTF_USESTDHANDLES;
CreatePipe(&hStdOutRead, &hStdOutWrite, &sa, 0);
si.hStdOutput = hStdOutWrite;
si.hStdError = hStdOutWrite;
sCommandLine="make.exe";
CreateProcess(NULL,sCommandLine.c_str(),&sa,&sa,TRUE,CREATE_NO_WINDOW,NULL,NULL, &si, &pi);

还是不行.
输出信息:
avrdude -p atmega48 -P com3    -c stk500v2    -U flash:w:mc_r1.14.hex  -U efuse:w:0x01:m -U hfuse:w:0xc5:m -U lfuse:w:0xe2:m -U lock:w:0x3c:m
process_easy: DuplicateHandle(In) failed (e=6)
process_easy() failed to launch process (e=6)
avrdude -p atmega48 -P com3 -c stk500v2 -U flash:w:mc_r1.14.hex -U efuse:w:0x01:m -U hfuse:w:0xc5:m -U lfuse:w:0xe2:m -U lock:w:0x3c:m
Counted 17 args in failed launch

[ 本帖最后由 ATmega32 于 2008-6-24 14:13 编辑 ]

lemboyz

试试popen（）

ATmega32

问题好像是出在:
CreateProcess(NULL,sCommandLine.c_str(),&sa,&sa,TRUE,CREATE_NO_WINDOW,NULL,NULL, &si, &pi);

[ 本帖最后由 ATmega32 于 2008-6-24 14:23 编辑 ]