- 论坛徽章:
- 0
|
OB 4.1 以前一直很稳定,就没有升级到4.3 ,可是最近老是发生这样的问题,启动后要过很久,服务却一切正常,下面的信息是什么出现问题了,有人知道吗?,不会是硬盘有问题吧,我每次fsck后就没有这样的错误信息了。
WARNING: / was not properly unmounted
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
wd0a: device timeout reading fsbn 661344 of 661344-0 (wd0 bn 661407; cn 656 tn 2
sn 33), retrying
wd0: soft error (corrected)
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 6144
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
wd0: transfer error, downgrading to Ultra-DMA mode 4
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd0a: device timeout reading fsbn 661376 of 661376-0 (wd0 bn 661439; cn 656 tn 3
sn 2), retrying
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 6144
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
wd0: transfer error, downgrading to Ultra-DMA mode 3
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 3
wd0a: device timeout reading fsbn 661376 of 661376-0 (wd0 bn 661439; cn 656 tn 3
sn 2), retrying
wd0: soft error (corrected)
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
wd0: transfer error, downgrading to Ultra-DMA mode 2
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd0a: device timeout reading fsbn 1664768 of 1664768-0 (wd0 bn 1664831; cn 1651
tn 9 sn 56), retrying
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
wd0: transfer error, downgrading to Ultra-DMA mode 1
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 1
wd0a: device timeout reading fsbn 1664768 of 1664768-0 (wd0 bn 1664831; cn 1651
tn 9 sn 56), retrying
wd0: soft error (corrected) |
|