免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
› 论坛 › IT运维 › 存储备份 › SATA硬盘的问题
最近访问板块 发新帖
查看: 4235 | 回复: 7
打印 上一主题 下一主题

[RAID与磁盘阵列] SATA硬盘的问题 [复制链接]

frostynova

论坛徽章:
0
跳转到指定楼层
1楼 [收藏(0)] [报告]
发表于 2008-07-08 18:18 |只看该作者 |倒序浏览
日志如下：
  1. Jul  8 13:20:12 Saturn ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
  2. Jul  8 13:20:12 Saturn ata1.00: cmd ec/00:00:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
  3. Jul  8 13:20:12 Saturn res 40/00:00:8e:00:61/00:00:02:00:00/e2 Emask 0x4 (timeout)
  4. Jul  8 13:20:12 Saturn ata1.00: status: { DRDY }
  5. Jul  8 13:20:12 Saturn ata1: hard resetting link
  6. Jul  8 13:20:12 Saturn ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  7. Jul  8 13:20:12 Saturn ata1.00: configured for UDMA/133
  8. Jul  8 13:20:12 Saturn ata1: EH complete
  9. Jul  8 13:20:12 Saturn sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors (203928 MB)
  10. Jul  8 13:20:12 Saturn sd 0:0:0:0: [sda] Write Protect is off
  11. Jul  8 13:20:12 Saturn sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  12. Jul  8 13:20:12 Saturn sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
复制代码


每隔一段时间就会出现一次，系统是GENTOO，内核是2.6.24-r8
lspci内容如下：
  1. 00:00.0 RAM memory: nVidia Corporation Unknown device 0547 (rev a2)
  2. 00:01.0 ISA bridge: nVidia Corporation Unknown device 0548 (rev a2)
  3. 00:01.1 SMBus: nVidia Corporation Unknown device 0542 (rev a2)
  4. 00:01.2 RAM memory: nVidia Corporation Unknown device 0541 (rev a2)
  5. 00:02.0 USB Controller: nVidia Corporation Unknown device 055e (rev a2)
  6. 00:02.1 USB Controller: nVidia Corporation Unknown device 055f (rev a2)
  7. 00:04.0 USB Controller: nVidia Corporation Unknown device 055e (rev a2)
  8. 00:04.1 USB Controller: nVidia Corporation Unknown device 055f (rev a2)
  9. 00:06.0 IDE interface: nVidia Corporation Unknown device 0560 (rev a1)
  10. 00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
  11. 00:08.0 PCI bridge: nVidia Corporation Unknown device 0561 (rev a2)
  12. 00:09.0 IDE interface: nVidia Corporation Unknown device 0550 (rev a2)
  13. 00:0a.0 Ethernet controller: nVidia Corporation Unknown device 054c (rev a2)
  14. 00:12.0 VGA compatible controller: nVidia Corporation Unknown device 053e (rev a2)
  15. 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
  16. 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
  17. 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
  18. 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
复制代码


请问是什么原因呢？
硬盘, 硬盘
刘世伟

论坛徽章:
0
2楼 [报告]
发表于 2008-07-12 00:27 |只看该作者
用smartctl看看硬盘内部参数：
files2:~# smartctl  -a /dev/sdb
smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar SE family
Device Model:     WDC WD1600JB-00GVC0
Serial Number:    WD-WCAL94268966
Firmware Version: 08.02D08
User Capacity:    160,041,885,696 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sat Jul 12 00:26:51 2008 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84)        Offline data collection activity
                                        was suspended by an interrupting command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)        The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                  (4641) seconds.
Offline data collection
capabilities:                          (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003)        Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01)        Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine
recommended polling time:          (   2) minutes.
Extended self-test routine
recommended polling time:          (  62) minutes.
Conveyance self-test routine
recommended polling time:          (   5) minutes.
SCT capabilities:                (0x003f)        SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0007   168   163   021    Pre-fail  Always       -       4141
  4 Start_Stop_Count        0x0032   100   100   040    Old_age   Always       -       405
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   200   200   051    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   066   066   000    Old_age   Always       -       25256
10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always       -       0
11 Calibration_Retry_Count 0x0013   100   100   051    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       308
194 Temperature_Celsius     0x0022   103   097   000    Old_age   Always       -       47
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       1
198 Offline_Uncorrectable   0x0012   200   200   000    Old_age   Always       -       1
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail  Offline      -       1
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
frostynova

论坛徽章:
0
3楼 [报告]
发表于 2008-07-12 16:25 |只看该作者

回复 #2 刘世伟 的帖子

/dev/sda的参数
  1. smartctl version 5.37 [x86_64-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
  2. Home page is [url]http://smartmontools.sourceforge.net/[/url]

  4. === START OF INFORMATION SECTION ===
  5. Model Family:     Maxtor DiamondMax 10 family (ATA/133 and SATA/150)
  6. Device Model:     Maxtor 6L200M0
  7. Serial Number:    L40HRQGH
  8. Firmware Version: BANC1E00
  9. User Capacity:    203,928,109,056 bytes
  10. Device is:        In smartctl database [for details use: -P show]
  11. ATA Version is:   7
  12. ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 0
  13. Local Time is:    Sat Jul 12 16:24:06 2008 CST
  14. SMART support is: Available - device has SMART capability.
  15. SMART support is: Enabled

  17. Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum.
  18. === START OF READ SMART DATA SECTION ===
  19. SMART overall-health self-assessment test result: PASSED

  21. General SMART Values:
  22. Offline data collection status:  (0x82) Offline data collection activity
  23.                                         was completed without error.
  24.                                         Auto Offline Data Collection: Enabled.
  25. Self-test execution status:      (   0) The previous self-test routine completed
  26.                                         without error or no self-test has ever
  27.                                         been run.
  28. Total time to complete Offline
  29. data collection:                 (1562) seconds.
  30. Offline data collection
  31. capabilities:                    (0x5b) SMART execute Offline immediate.
  32.                                         Auto Offline data collection on/off support.
  33.                                         Suspend Offline collection upon new
  34.                                         command.
  35.                                         Offline surface scan supported.
  36.                                         Self-test supported.
  37.                                         No Conveyance Self-test supported.
  38.                                         Selective Self-test supported.
  39. SMART capabilities:            (0x0003) Saves SMART data before entering
  40.                                         power-saving mode.
  41.                                         Supports SMART auto save timer.
  42. Error logging capability:        (0x01) Error logging supported.
  43.                                         General Purpose Logging supported.
  44. Short self-test routine
  45. recommended polling time:        (   2) minutes.
  46. Extended self-test routine
  47. recommended polling time:        (  81) minutes.

  49. SMART Attributes Data Structure revision number: 16
  50. Vendor Specific SMART Attributes with Thresholds:
  51. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  52.   3 Spin_Up_Time            0x0027   207   206   063    Pre-fail  Always       -       13799
  53.   4 Start_Stop_Count        0x0032   253   253   000    Old_age   Always       -       123
  54.   5 Reallocated_Sector_Ct   0x0033   253   253   063    Pre-fail  Always       -       0
  55.   6 Read_Channel_Margin     0x0001   253   253   100    Pre-fail  Offline      -       0
  56.   7 Seek_Error_Rate         0x000a   253   247   000    Old_age   Always       -       0
  57.   8 Seek_Time_Performance   0x0027   249   240   187    Pre-fail  Always       -       42485
  58.   9 Power_On_Minutes        0x0032   189   189   000    Old_age   Always       -       632h+03m
  59. 10 Spin_Retry_Count        0x002b   229   214   157    Pre-fail  Always       -       18
  60. 11 Calibration_Retry_Count 0x002b   253   252   223    Pre-fail  Always       -       0
  61. 12 Power_Cycle_Count       0x0032   253   253   000    Old_age   Always       -       116
  62. 192 Power-Off_Retract_Count 0x0032   253   253   000    Old_age   Always       -       0
  63. 193 Load_Cycle_Count        0x0032   253   253   000    Old_age   Always       -       0
  64. 194 Temperature_Celsius     0x0032   043   253   000    Old_age   Always       -       41
  65. 195 Hardware_ECC_Recovered  0x000a   253   210   000    Old_age   Always       -       50041
  66. 196 Reallocated_Event_Count 0x0008   252   252   000    Old_age   Offline      -       1
  67. 197 Current_Pending_Sector  0x0008   253   253   000    Old_age   Offline      -       0
  68. 198 Offline_Uncorrectable   0x0008   249   249   000    Old_age   Offline      -       4
  69. 199 UDMA_CRC_Error_Count    0x0008   199   199   000    Old_age   Offline      -       0
  70. 200 Multi_Zone_Error_Rate   0x000a   253   252   000    Old_age   Always       -       0
  71. 201 Soft_Read_Error_Rate    0x000a   253   252   000    Old_age   Always       -       0
  72. 202 TA_Increase_Count       0x000a   253   252   000    Old_age   Always       -       0
  73. 203 Run_Out_Cancel          0x000b   253   252   180    Pre-fail  Always       -       0
  74. 204 Shock_Count_Write_Opern 0x000a   253   252   000    Old_age   Always       -       0
  75. 205 Shock_Rate_Write_Opern  0x000a   253   252   000    Old_age   Always       -       0
  76. 207 Spin_High_Current       0x002a   229   214   000    Old_age   Always       -       18
  77. 208 Spin_Buzz               0x002a   253   252   000    Old_age   Always       -       0
  78. 209 Offline_Seek_Performnce 0x0024   240   240   000    Old_age   Offline      -       161
  79. 210 Unknown_Attribute       0x0032   253   252   000    Old_age   Always       -       0
  80. 211 Unknown_Attribute       0x0032   253   252   000    Old_age   Always       -       0
  81. 212 Unknown_Attribute       0x0032   253   252   000    Old_age   Always       -       0

  83. Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
  84. SMART Error Log Version: 1
  85. ATA Error Count: 12 (device log contains only the most recent five errors)
  86.         CR = Command Register [HEX]
  87.         FR = Features Register [HEX]
  88.         SC = Sector Count Register [HEX]
  89.         SN = Sector Number Register [HEX]
  90.         CL = Cylinder Low Register [HEX]
  91.         CH = Cylinder High Register [HEX]
  92.         DH = Device/Head Register [HEX]
  93.         DC = Device Command Register [HEX]
  94.         ER = Error register [HEX]
  95.         ST = Status register [HEX]
  96. Powered_Up_Time is measured from power on, and printed as
  97. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  98. SS=sec, and sss=millisec. It "wraps" after 49.710 days.

  100. Error 12 occurred at disk power-on lifetime: 14884 hours (620 days + 4 hours)
  101.   When the command that caused the error occurred, the device was in an unknown state.

  103.   After command completion occurred, registers were:
  104.   ER ST SC SN CL CH DH
  105.   -- -- -- -- -- -- --
  106.   40 00 00 00 00 00 a0

  108.   Commands leading to the command that caused the error were:
  109.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  110.   -- -- -- -- -- -- -- --  ----------------  --------------------
  111.   ec 00 00 00 00 00 a0 00  36d+09:52:50.611  IDENTIFY DEVICE
  112.   c8 00 08 3f b9 99 e5 00  36d+09:52:44.493  READ DMA
  113.   27 00 00 00 00 00 e0 00  36d+09:52:44.492  READ NATIVE MAX ADDRESS EXT
  114.   ec 00 00 00 00 00 a0 00  36d+09:52:44.485  IDENTIFY DEVICE
  115.   ef 03 46 00 00 00 a0 00  36d+09:52:44.480  SET FEATURES [Set transfer mode]

  117. Error 11 occurred at disk power-on lifetime: 14884 hours (620 days + 4 hours)
  118.   When the command that caused the error occurred, the device was in an unknown state.

  120.   After command completion occurred, registers were:
  121.   ER ST SC SN CL CH DH
  122.   -- -- -- -- -- -- --
  123.   40 00 00 00 00 00 a0

  125.   Commands leading to the command that caused the error were:
  126.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  127.   -- -- -- -- -- -- -- --  ----------------  --------------------
  128.   ec 00 00 00 00 00 a0 00  36d+09:52:44.378  IDENTIFY DEVICE
  129.   c8 00 08 3f b9 99 e5 00  36d+09:52:38.254  READ DMA
  130.   27 00 00 00 00 00 e0 00  36d+09:52:38.253  READ NATIVE MAX ADDRESS EXT
  131.   ec 00 00 00 00 00 a0 00  36d+09:52:38.246  IDENTIFY DEVICE
  132.   ef 03 46 00 00 00 a0 00  36d+09:52:38.240  SET FEATURES [Set transfer mode]

  134. Error 10 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  135.   When the command that caused the error occurred, the device was in an unknown state.

  137.   After command completion occurred, registers were:
  138.   ER ST SC SN CL CH DH
  139.   -- -- -- -- -- -- --
  140.   00 00 00 00 00 00 00

  142.   Commands leading to the command that caused the error were:
  143.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  144.   -- -- -- -- -- -- -- --  ----------------  --------------------
  145.   00 39 00 00 00 00 00 00      00:00:00.000  NOP [Reserved subcommand]

  147. SMART Self-test log structure revision number 1
  148. No self-tests have been logged.  [To run self-tests, use: smartctl -t]


  151. SMART Selective self-test log data structure revision number 1
  152. SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  153.     1        0        0  Not_testing
  154.     2        0        0  Not_testing
  155.     3        0        0  Not_testing
  156.     4        0        0  Not_testing
  157.     5        0        0  Not_testing
  158. Selective self-test flags (0x0):
  159.   After scanning selected spans, do NOT read-scan remainder of disk.
  160. If Selective self-test is pending on power-up, resume after 0 minute delay.

复制代码
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
刘世伟

论坛徽章:
0
4楼 [报告]
发表于 2008-07-12 16:48 |只看该作者
原帖由 frostynova 于 2008-7-12 16:25 发表 [url=http://bbs.chinaunix.net/redirect.php?goto=findpost&pid=8798274&ptid=1192012][img]
194 Temperature_Celsius     0x0032   043   253   000    Old_age   Always       -       41
195 Hardware_ECC_Recovered  0x000a   253   210   000    Old_age   Always       -       50041

温度41度，还算不错。

不过Hardware_ECC_Recovered 是什么意思？ 硬件ECC修复的读错误？
50041次有点高吧。

等一会儿再试试看看这个值会不会上升。
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
frostynova

论坛徽章:
0
5楼 [报告]
发表于 2008-07-12 17:14 |只看该作者

回复 #4 刘世伟 的帖子

现在变成这样：
  1. smartctl version 5.37 [x86_64-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
  2. Home page is [url]http://smartmontools.sourceforge.net/[/url]

  4. === START OF INFORMATION SECTION ===
  5. Model Family:     Maxtor DiamondMax 10 family (ATA/133 and SATA/150)
  6. Device Model:     Maxtor 6L200M0
  7. Serial Number:    L40HRQGH
  8. Firmware Version: BANC1E00
  9. User Capacity:    203,928,109,056 bytes
  10. Device is:        In smartctl database [for details use: -P show]
  11. ATA Version is:   7
  12. ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 0
  13. Local Time is:    Sat Jul 12 17:13:42 2008 CST
  14. SMART support is: Available - device has SMART capability.
  15. SMART support is: Enabled

  17. Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum.
  18. === START OF READ SMART DATA SECTION ===
  19. SMART overall-health self-assessment test result: PASSED

  21. General SMART Values:
  22. Offline data collection status:  (0x82) Offline data collection activity
  23.                                         was completed without error.
  24.                                         Auto Offline Data Collection: Enabled.
  25. Self-test execution status:      (   0) The previous self-test routine completed
  26.                                         without error or no self-test has ever
  27.                                         been run.
  28. Total time to complete Offline
  29. data collection:                 (1562) seconds.
  30. Offline data collection
  31. capabilities:                    (0x5b) SMART execute Offline immediate.
  32.                                         Auto Offline data collection on/off support.
  33.                                         Suspend Offline collection upon new
  34.                                         command.
  35.                                         Offline surface scan supported.
  36.                                         Self-test supported.
  37.                                         No Conveyance Self-test supported.
  38.                                         Selective Self-test supported.
  39. SMART capabilities:            (0x0003) Saves SMART data before entering
  40.                                         power-saving mode.
  41.                                         Supports SMART auto save timer.
  42. Error logging capability:        (0x01) Error logging supported.
  43.                                         General Purpose Logging supported.
  44. Short self-test routine
  45. recommended polling time:        (   2) minutes.
  46. Extended self-test routine
  47. recommended polling time:        (  81) minutes.

  49. SMART Attributes Data Structure revision number: 16
  50. Vendor Specific SMART Attributes with Thresholds:
  51. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  52.   3 Spin_Up_Time            0x0027   207   206   063    Pre-fail  Always       -       13799
  53.   4 Start_Stop_Count        0x0032   253   253   000    Old_age   Always       -       123
  54.   5 Reallocated_Sector_Ct   0x0033   253   253   063    Pre-fail  Always       -       0
  55.   6 Read_Channel_Margin     0x0001   253   253   100    Pre-fail  Offline      -       0
  56.   7 Seek_Error_Rate         0x000a   253   247   000    Old_age   Always       -       0
  57.   8 Seek_Time_Performance   0x0027   249   240   187    Pre-fail  Always       -       48548
  58.   9 Power_On_Minutes        0x0032   189   189   000    Old_age   Always       -       632h+53m
  59. 10 Spin_Retry_Count        0x002b   229   214   157    Pre-fail  Always       -       18
  60. 11 Calibration_Retry_Count 0x002b   253   252   223    Pre-fail  Always       -       0
  61. 12 Power_Cycle_Count       0x0032   253   253   000    Old_age   Always       -       116
  62. 192 Power-Off_Retract_Count 0x0032   253   253   000    Old_age   Always       -       0
  63. 193 Load_Cycle_Count        0x0032   253   253   000    Old_age   Always       -       0
  64. 194 Temperature_Celsius     0x0032   043   253   000    Old_age   Always       -       41
  65. 195 Hardware_ECC_Recovered  0x000a   253   210   000    Old_age   Always       -       37087
  66. 196 Reallocated_Event_Count 0x0008   252   252   000    Old_age   Offline      -       1
  67. 197 Current_Pending_Sector  0x0008   253   253   000    Old_age   Offline      -       0
  68. 198 Offline_Uncorrectable   0x0008   249   249   000    Old_age   Offline      -       4
  69. 199 UDMA_CRC_Error_Count    0x0008   199   199   000    Old_age   Offline      -       0
  70. 200 Multi_Zone_Error_Rate   0x000a   253   252   000    Old_age   Always       -       0
  71. 201 Soft_Read_Error_Rate    0x000a   253   252   000    Old_age   Always       -       0
  72. 202 TA_Increase_Count       0x000a   253   252   000    Old_age   Always       -       0
  73. 203 Run_Out_Cancel          0x000b   253   252   180    Pre-fail  Always       -       0
  74. 204 Shock_Count_Write_Opern 0x000a   253   252   000    Old_age   Always       -       0
  75. 205 Shock_Rate_Write_Opern  0x000a   253   252   000    Old_age   Always       -       0
  76. 207 Spin_High_Current       0x002a   229   214   000    Old_age   Always       -       18
  77. 208 Spin_Buzz               0x002a   253   252   000    Old_age   Always       -       0
  78. 209 Offline_Seek_Performnce 0x0024   240   240   000    Old_age   Offline      -       161
  79. 210 Unknown_Attribute       0x0032   253   252   000    Old_age   Always       -       0
  80. 211 Unknown_Attribute       0x0032   253   252   000    Old_age   Always       -       0
  81. 212 Unknown_Attribute       0x0032   253   252   000    Old_age   Always       -       0

  83. Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
  84. SMART Error Log Version: 1
  85. ATA Error Count: 12 (device log contains only the most recent five errors)
  86.         CR = Command Register [HEX]
  87.         FR = Features Register [HEX]
  88.         SC = Sector Count Register [HEX]
  89.         SN = Sector Number Register [HEX]
  90.         CL = Cylinder Low Register [HEX]
  91.         CH = Cylinder High Register [HEX]
  92.         DH = Device/Head Register [HEX]
  93.         DC = Device Command Register [HEX]
  94.         ER = Error register [HEX]
  95.         ST = Status register [HEX]
  96. Powered_Up_Time is measured from power on, and printed as
  97. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  98. SS=sec, and sss=millisec. It "wraps" after 49.710 days.

  100. Error 12 occurred at disk power-on lifetime: 14884 hours (620 days + 4 hours)
  101.   When the command that caused the error occurred, the device was in an unknown state.

  103.   After command completion occurred, registers were:
  104.   ER ST SC SN CL CH DH
  105.   -- -- -- -- -- -- --
  106.   40 00 00 00 00 00 a0

  108.   Commands leading to the command that caused the error were:
  109.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  110.   -- -- -- -- -- -- -- --  ----------------  --------------------
  111.   ec 00 00 00 00 00 a0 00  36d+09:52:50.611  IDENTIFY DEVICE
  112.   c8 00 08 3f b9 99 e5 00  36d+09:52:44.493  READ DMA
  113.   27 00 00 00 00 00 e0 00  36d+09:52:44.492  READ NATIVE MAX ADDRESS EXT
  114.   ec 00 00 00 00 00 a0 00  36d+09:52:44.485  IDENTIFY DEVICE
  115.   ef 03 46 00 00 00 a0 00  36d+09:52:44.480  SET FEATURES [Set transfer mode]

  117. Error 11 occurred at disk power-on lifetime: 14884 hours (620 days + 4 hours)
  118.   When the command that caused the error occurred, the device was in an unknown state.

  120.   After command completion occurred, registers were:
  121.   ER ST SC SN CL CH DH
  122.   -- -- -- -- -- -- --
  123.   40 00 00 00 00 00 a0

  125.   Commands leading to the command that caused the error were:
  126.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  127.   -- -- -- -- -- -- -- --  ----------------  --------------------
  128.   ec 00 00 00 00 00 a0 00  36d+09:52:44.378  IDENTIFY DEVICE
  129.   c8 00 08 3f b9 99 e5 00  36d+09:52:38.254  READ DMA
  130.   27 00 00 00 00 00 e0 00  36d+09:52:38.253  READ NATIVE MAX ADDRESS EXT
  131.   ec 00 00 00 00 00 a0 00  36d+09:52:38.246  IDENTIFY DEVICE
  132.   ef 03 46 00 00 00 a0 00  36d+09:52:38.240  SET FEATURES [Set transfer mode]

  134. Error 10 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  135.   When the command that caused the error occurred, the device was in an unknown state.

  137.   After command completion occurred, registers were:
  138.   ER ST SC SN CL CH DH
  139.   -- -- -- -- -- -- --
  140.   00 00 00 00 00 00 00

  142.   Commands leading to the command that caused the error were:
  143.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  144.   -- -- -- -- -- -- -- --  ----------------  --------------------
  145.   00 39 00 00 00 00 00 00      00:00:00.000  NOP [Reserved subcommand]

  147. SMART Self-test log structure revision number 1
  148. No self-tests have been logged.  [To run self-tests, use: smartctl -t]


  151. SMART Selective self-test log data structure revision number 1
  152. SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  153.     1        0        0  Not_testing
  154.     2        0        0  Not_testing
  155.     3        0        0  Not_testing
  156.     4        0        0  Not_testing
  157.     5        0        0  Not_testing
  158. Selective self-test flags (0x0):
  159.   After scanning selected spans, do NOT read-scan remainder of disk.
  160. If Selective self-test is pending on power-up, resume after 0 minute delay.

复制代码
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
刘世伟

论坛徽章:
0
6楼 [报告]
发表于 2008-07-12 19:03 |只看该作者
好像没啥问题。
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
frostynova

论坛徽章:
0
7楼 [报告]
发表于 2008-07-12 19:53 |只看该作者

回复 #6 刘世伟 的帖子

难道说是内核编译的有问题么？
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
yuanyuan025

论坛徽章:
0
8楼 [报告]
发表于 2008-07-16 19:37 |只看该作者
很复杂啊
实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？
返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号：11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们：huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP