安装iscsi包失败

月中井

iscsi的安装包：iSCSI-00_B.11.23.03e_HP-UX_B.11.23_IA+PA.depot
HP-UX：11.23
安装命令：swinstall -x autoreboot=true -s /tmp/iSCSI-00_B.11.23.03e_HP-UX_B.11.23_IA+PA.depot iSCSI-00


安装失败，错误提示如下，请大虾帮忙分析一下：
# swjob -a log rx2600-0039 @ rx2600:/
=======  08/08/08 07:21:15 EAT  BEGIN install AGENT SESSION (pid=5275)
         (jobid=rx2600-0039)

       * Agent session started for user "root@rx2600". (pid=5275)

       * Beginning Analysis Phase.
       * Source:
         rx2600:/tmp/iSCSI-00_B.11.23.03e_HP-UX_B.11.23_IA+PA.depot
       * Target:           rx2600:/
       * Target logfile:   rx2600:/var/adm/sw/swagent.log
       * Reading source for product information.
       * Reading source for file information.
       * Executing preDSA command.
NOTE:    The used disk space on filesystem "/" is estimated to increase
         by 24 Kbytes.
         This will leave 760656 Kbytes of available user disk space
         after the installation.
NOTE:    The used disk space on filesystem "/stand" is estimated to
         increase by 12397 Kbytes.
         This will leave 910659 Kbytes of available user disk space
         after the installation.
NOTE:    The used disk space on filesystem "/usr" is estimated to
         increase by 1400 Kbytes.
         This will leave 1650840 Kbytes of available user disk space
         after the installation.
NOTE:    The used disk space on filesystem "/var" is estimated to
         increase by 72 Kbytes.
         This will leave 1242880 Kbytes of available user disk space
         after the installation.
NOTE:    The used disk space on filesystem "/opt" is estimated to
         increase by 480 Kbytes.
         This will leave 1816872 Kbytes of available user disk space
         after the installation.

       * Summary of Analysis Phase:
       * 3 of 3 filesets had no Errors or Warnings.
       * The Analysis Phase succeeded.


       * Beginning the Install Execution Phase.
       * Filesets:         3
       * Files:            18
       * Kbytes:           1829
       * Installing bundle "iSCSI-00,r=B.11.23.03e" .
NOTE:    Saving the current system file at "/stand/system" to
         "/stand/system.prev"
       * The current configuration (including any changes being held for
         next boot) has been exported to /tmp/get_sysfile.5289.
NOTE:    The template file has been extracted from "/stand/vmunix"
         It has been placed in "/stand/system" where it will be used
         to build a new kernel.
       * Installing fileset "ISCSI-SWD.ISCSI-KRN,r=B.11.23.03e" (1 of
         3).
ERROR:   The internal uncompress routine has detected corruption while
         decompressing to file "/usr/conf/lib/libiscsi.a" which has
         compression type "gzip".
ERROR:   tar: /tmp/iSCSI-00_B.11.23.03e_HP-UX_B.11.23_IA+PA.depot :
         This doesn't look like a tar archive
ERROR:   tar: /tmp/iSCSI-00_B.11.23.03e_HP-UX_B.11.23_IA+PA.depot :
         Skipping to next file...
ERROR:   Failed installing fileset "ISCSI-SWD.ISCSI-KRN,r=B.11.23.03e".
         Check the above output for details.
       * Retry number 1 of 1 for loading files for fileset
         "ISCSI-SWD.ISCSI-KRN,r=B.11.23.03e".
       * Installing fileset "ISCSI-SWD.ISCSI-KRN,r=B.11.23.03e" (1 of
         3).
ERROR:   tar: /tmp/iSCSI-00_B.11.23.03e_HP-UX_B.11.23_IA+PA.depot :
         This doesn't look like a tar archive
ERROR:   tar: /tmp/iSCSI-00_B.11.23.03e_HP-UX_B.11.23_IA+PA.depot :
         Skipping to next file...
NOTE:    The module 'iscsi' has been removed from /stand/system, since
         there is no supported version of the module installed.
NOTE:    The module 'iscsial' has been removed from /stand/system, since
         there is no supported version of the module installed.
NOTE:    The module 'isw' has been removed from /stand/system, since
         there is no supported version of the module installed.
       * The automatic 'backup' configuration has been updated.
       * /stand/system has been imported.  The changes have been applied
         to the currently running system.
       * Installing fileset "ISCSI-SWD.ISCSI-MAN,r=B.11.23.03e" (2 of
         3).
ERROR:   Internal error.  Software item "ISCSI-MAN" not found on tape
         depot.  This might indicate the depot is corrupt.  This error
         occurred in function "idam_LoadTapeItems", source file
         "id_ser.c", line 3979.  Please give this information to your
         Hewlett-Packard support contact.
ERROR:   Failed installing fileset "ISCSI-SWD.ISCSI-MAN,r=B.11.23.03e".
         Check the above output for details.
       * Retry number 1 of 1 for loading files for fileset
         "ISCSI-SWD.ISCSI-MAN,r=B.11.23.03e".
       * Installing fileset "ISCSI-SWD.ISCSI-MAN,r=B.11.23.03e" (2 of
         3).
ERROR:   tar: /tmp/iSCSI-00_B.11.23.03e_HP-UX_B.11.23_IA+PA.depot :
         This doesn't look like a tar archive
ERROR:   tar: /tmp/iSCSI-00_B.11.23.03e_HP-UX_B.11.23_IA+PA.depot :
         Skipping to next file...
ERROR:   Internal error.  Software item "ISCSI-MAN" not found on tape
         depot.  This might indicate the depot is corrupt.  This error
         occurred in function "idam_LoadTapeItems", source file
         "id_ser.c", line 3979.  Please give this information to your
         Hewlett-Packard support contact.
ERROR:   Failed installing fileset "ISCSI-SWD.ISCSI-MAN,r=B.11.23.03e".
         Check the above output for details.
NOTE:    The Install Phase has suspended.  Check the above output for
         reasons.


       * Aborting the Install Phase.

=======  08/08/08 07:21:58 EAT  END install AGENT SESSION (Aborted)
         (pid=5275) (jobid=rx2600-0039)