OpenVox IX100+trixbox+CF card

zhulizhong

hello, all of users:
OpenVox IX100 with PC Engines Alix 2C2 works  under Trixbox(2.6), which installed in CF card.  it is smaller and good
enough for SOHO office.  here is what you should go:
1) using VMware to create a image for CF card booting
1.1) setting for a machine: Linux 2.6kernel, 256mb ram, 1 serial port, 2 usb port, CF card as a PHYSICAL drive
1.2) Editing: etc/grub.conf, /etc/inittab, /etc/securetty, edit /etc/sysconfig/init, /etc/sysconfig/kudzu
2) copying  it into CF card using dd in linux or physdiskwrite for XP. it will much much time.
3) Inserting the CF card into IX100 CF card slot and booting it from serial port : console=ttyS0,9600n8,
    you can use hyper terminal in XP or  minicom in linux to access the console.
4) installing mISDN for OpenVox mini PCI BRI cards(B200M/B400M)
5) Accessing trixbox GUI to set call routing.

Regards!
zhulizhong

[ 本帖最后由 zhulizhong 于 2008-8-18 10:53 编辑 ]

peij

思路不