PATH MISS是怎么回事

lordshand

今天做diag, system verification , 系统报告如下信息:

MISSING PATHS                                                                                    801024

The path between the following resources is missing:
                 U787B.001.DNW2D55-
hdisk0           P1-T14-L5-L0        16 Bit LVD SCSI Disk Drive (73400 MB)
                 U787B.001.DNW2D55-
scsi0            P1-T14              PCI-X Dual Channel Ultra320 SCSI Adapter
                                     bus

Select an option to resolve the missing path.

  Continue to run diagnostics on the selected resource.
    This selection will leave the path in the system configuration.
  The path has been removed.
    This selection will remove the path from the system configuration.
  The path has not been removed.
    This selection will determine why the path is shown as missing.


我选了第一项, 和第三项继续执行, 问题都没有修复, 下次做system verification, 还是报告这个错误,

这块盘是系统盘, 没做镜像, 这个错误对系统没什么影响...

请问如何解决问题?????

jerryjzm

focus!         push!

lordshand

Since the system is running in normal operation, some resources cannot be
tested in concurrent mode. The following list shows which resources cannot be
fully tested, although the error log analysis in PD Mode may highlight a problem:

SCSI adapters used by disks connected to paging devices

The disk drives used for paging

Memory

Processor

BBBBBBBB_cu

解决的步骤，lz能详细讲讲吗？

AIX深入敌后

模式不对？