免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 3933 | 回复: 5
打印 上一主题 下一主题

系统不能启动 [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2008-10-08 16:28 |只看该作者 |倒序浏览
系统一直停在Save system crash dump if needed 这一步..

都几个小时了还没反映.不知道怎么回事.请大家帮忙.

论坛徽章:
0
2 [报告]
发表于 2008-10-08 17:01 |只看该作者
Firmware Version 1.3

Duplex Console IO Dependent Code (IODC) revision 1

------------------------------------------------------------------------------
   (c) Copyright 1995-2000, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------

  Processor   Speed            State           Coprocessor State  I/D Cache
  ---------  --------   ---------------------  -----------------  -------------
      0      500 MHz    Active                 Functional         512 kB/1 MB

  Central Bus Speed:                   120 MHz

  Available memory:             2147483648 bytes
  Good memory required:           33968128 bytes

  Primary boot path:    FWSCSI.5.0
  Alternate boot path:  FWSCSI.5.0
  Console path:         GRAPHICS(3)
  Keyboard path:        USB

Processor is booting from first available device.

To discontinue, press any key within 10 seconds.

10 seconds expired.
Proceeding...

Searching for device(s) with bootable media...
This may take several minutes.

To discontinue search, press any key (termination may not be immediate).

Attempting to boot Primary Path...

BOOTABLE DEVICE FOUND:
   Path Number        Device Path              Device Type and Utilities
   -----------        -----------------        -------------------------
   P0                 FWSCSI.5.0               COMPAQ  BD146863B3      
                                               IPL

Booting...
Boot IO Dependent Code (IODC) revision 0


HARD Booted.

ISL Revision A.00.43  Apr 12, 2000

ISL booting  hpux

Boot
: disk(10/0/15/0.5.0.0.0.0.0;0)/stand/vmunix
10932224 + 1933312 + 12458328 start 0x1f73e8
gate64: sysvec_vaddr = 0xc0002000 for 2 pages
NOTICE: autofs_link(): File system was registered at index 3.
NOTICE: cachefs_link(): File system was registered at index 5.
NOTICE: nfs3_link(): File system was registered at index 6.
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 10/1/4/0

    System Console is on the Built-In Serial Interface
Logical volume 64, 0x3 configured as ROOT
Logical volume 64, 0x2 configured as SWAP
Logical volume 64, 0x2 configured as DUMP
    Swap device table:  (start & size given in 512-byte blocks)
        entry 0 - major is 64, minor is 0x2; start = 0, size = 8388608
Starting the STREAMS daemons-phase 1
Checking root file system.
file system is clean - log replay is not required
Root check done.
Create STCP device files
          $Revision: vmunix:    vw: -proj    selectors: CUPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108'  Wed Nov  8 19:24:56 PST 2000 $
Memory Information:
    physical page size = 4096 bytes, logical page size = 4096 bytes
    Physical: 2097152 Kbytes, lockable: 1540104 Kbytes, available: 1775632 Kbytes

/sbin/ioinitrc:
/sbin/krs_sysinit:
ln: Warning! /stand/krs/_stand_vmunix.krs and /stand/krs_lkg//_stand_vmunix.krs are identical
ln: Warning! /stand/krs/system.krs and /stand/krs_lkg//system.krs are identical


/sbin/bcheckrc:
Checking for LVM volume groups and Activating (if any exist)
Volume group "/dev/vg00" has been successfully changed.
Activated volume group
Volume group "/dev/vgdata" has been successfully changed.
vxfs fsck: sanity check: root file system OK (mounted read/write)
Checking hfs file systems
/sbin/fsclean: /dev/vg00/lvol1 (mounted) ok
HFS file systems are OK, not running fsck
Checking vxfs file systems
/dev/vg00/lvol8 :
vxfs fsck: sanity check: /dev/vg00/lvol8 OK
/dev/vg00/arch :
vxfs fsck: sanity check: /dev/vg00/arch OK
/dev/vg01/soft1 :
vxfs fsck: sanity check failed: cannot stat /dev/vg01/soft1
/dev/vg00/oracle :
vxfs fsck: sanity check: /dev/vg00/oracle OK
/dev/vg00/u01 :
vxfs fsck: sanity check: /dev/vg00/u01 OK
/dev/vg00/lvol3 :
vxfs fsck: sanity check: root file system OK (mounted read/write)
/dev/vg00/lvol4 :
vxfs fsck: sanity check: /dev/vg00/lvol4 OK
/dev/vg00/lvol5 :
vxfs fsck: sanity check: /dev/vg00/lvol5 OK
/dev/vg00/lvol6 :
vxfs fsck: sanity check: /dev/vg00/lvol6 OK
/dev/vg00/lvol7 :
vxfs fsck: sanity check: /dev/vg00/lvol7 OK

Cleaning /etc/ptmp...
(c)Copyright 1983-2000 Hewlett-Packard Co.,  All Rights Reserved.
(c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California
(c)Copyright 1980, 1984, 1986 Novell, Inc.
(c)Copyright 1986-1992 Sun Microsystems, Inc.
(c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology
(c)Copyright 1989-1993  The Open Software Foundation, Inc.
(c)Copyright 1986 Digital Equipment Corp.
(c)Copyright 1990 Motorola, Inc.
(c)Copyright 1990, 1991, 1992 Cornell University
(c)Copyright 1989-1991 The University of Maryland
(c)Copyright 1988 Carnegie Mellon University
(c)Copyright 1991-2000 Mentat Inc.
(c)Copyright 1996 Morning Star Technologies, Inc.
(c)Copyright 1996 Progressive Systems, Inc.
(c)Copyright 1991-2000 Isogon Corporation, All Rights Reserved.


                           RESTRICTED RIGHTS LEGEND
Use, duplication, or disclosure by the U.S. Government is subject to
restrictions as set forth in sub-paragraph (c)(1)(ii) of the Rights in
Technical Data and Computer Software clause in DFARS 252.227-7013.

                           Hewlett-Packard Company
                           3000 Hanover Street
                           Palo Alto, CA 94304 U.S.A.

Rights for non-DOD U.S. Government Departments and Agencies are as set
forth in FAR 52.227-19(c)(1,2).

/sbin/auto_parms: DHCP access is disabled (see /etc/auto_parms.log)

     
     HP-UX Start-up in progress
     __________________________

     Configure system crash dumps ................................................ OK
     VxVM device node check ...................................................... OK
     VxVM general startup ........................................................ OK
     VxVM reconfiguration recovery ............................................... OK
     Mount file systems .......................................................... OK
     Update kernel and loadable modules .......................................... N/A
     Initialize loadable modules ................................................. OK
     Setting hostname ............................................................ OK
     Start Kernel Logging facility ............................................... N/A
     Set privilege group ......................................................... N/A
     Display date ................................................................ N/A
     Copy processor logs to /var/tombstones ...................................... OK
     Save system crash dump if needed ............................................


这是整个启动过程...到Save system crash dump if needed 就一直没反应了..

论坛徽章:
0
3 [报告]
发表于 2008-10-08 20:45 |只看该作者
ctrl+\

论坛徽章:
0
4 [报告]
发表于 2008-10-08 21:09 |只看该作者
toc进单用户,把这个服务关掉吧,我也遇到过,服务配置文件在/etc/rc.config.d/目录下.

论坛徽章:
0
5 [报告]
发表于 2008-10-09 15:08 |只看该作者
原帖由 sinemaw 于 2008-10-8 20:45 发表
ctrl+\


先让系统跳过,然后再做3楼所言。


可能的原因是你系统need crash,但是/var空间不够将整个内存crash出来...
系统还是存在问题的,好好检查下。

论坛徽章:
0
6 [报告]
发表于 2008-10-11 20:52 |只看该作者

回复 #1 hai7288 的帖子

/var空间不够了
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP