- 论坛徽章:
- 0
|
Sun Fire V125, V210, V240, V250, V440, and Netra 210, 240 and 440 how to upgarde alom firmware
When you have the server up and running please install the ALOM firmware:
-----------------------------------------------------------------------------
Section 2. Installing the ALOM Firmware From the Solaris OS
-----------------------------------------------------------------------------
1. Use the telnet, rlogin or ssh command through the network to
log into the
system as superuser.
Caution: Do not attempt this procedure while logged into the
system
through the SERIAL MGT port.
2. Change directories as follows:
# cd /usr/platform/`uname -i`/lib
3. If there is no images subdirectory, create one:
# mkdir images
4. Change to the images directory:
# cd images
5. Place this file in the images directory:
ALOM_1.6.8_fw_hw0.tar.gz
6. Unpack the tar file: gzcat ALOM_1.6.8_fw_hw0.tar.gz | tar xf -
The following files will be created:
README (this file)
copyright
Legal/ (directory containing Licence, Entitlement and
Third Party Readmes)
alombootfw (boot image file)
alommainfw (main image file)
7. Load the boot image file alombootfw into the System
Controller hardware:
# /usr/platform/`uname -i`/sbin/scadm download boot
alombootfw
8. When the scadm utility completes, wait 60 seconds.
9. Load the main image file alommainfw into the System
Controller hardware:
# /usr/platform/`uname -i`/sbin/scadm download alommainfw
Approximately 120 seconds after the scadm utility
completes, ALOM
is available for use.
10. Delete the tar file:
# rm ALOM_1.6.8_fw_hw0.tar.gz
download firmware:http://www.sun.com/download/products.xml?id=44eb1efd
|
| 坚持是成功的捷径......
unix5188社区论坛
服务器硬件讨论专区 | 操作系统专区 |数据库专区
|
|
|