cisco2950 故障日志，帮忙分析，谢谢

light102

2950面板syst灯绿色。闪动。端口连接后显黄色状态。下面为错误日志，帮忙分析下：

1. Switch#s log
   
2. Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
   
3.     Console logging: level debugging, 9 messages logged
   
4.     Monitor logging: level debugging, 0 messages logged
   
5.     Buffer logging: level debugging, 9 messages logged
   
6.     File logging: disabled
   
7.     Trap logging: level informational, 16 message lines logged
   
8. 
   
9. Log Buffer (4096 bytes):
   
10. 
    
11. 00:00:08: %PLATFORM_CAT2950-3-PCI_FIND_FAILURE:
    
12. The number of asics expected were 1, PCI bus scan found -1
    
13. 
    
14. 00:00:08: %LINK-4-NOMAC: A random default MAC address of 0000.0c88.5f00 has
    
15.   been chosen.  Ensure that this address is unique, or specify MAC
    
16.   addresses for commands (such as 'novell routing') that allow the
    
17.   use of this address as a default.
    
18. 00:00:08: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
    
19. [color=Red]00:00:09: %SW_VLAN-4-IFS_FAILURE: VLAN manager encountered file operation error:
    
20. call = ifs_read_until (header) / file =  / code = 21 (Is a directory) / bytes t
    
21. ransfered = -1[/color]-Traceback= 803AA810 803A7A04 801C3CFC 801C3CE8
    
22. 00:00:10: %SYS-5-CONFIG_I: Configured from memory by console
    
23. 00:00:10: %SYS-5-RESTART: System restarted --
    
24. Cisco Internetwork Operating System Software
    
25. IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(12c)EA1, RELEASE SOFTWARE
    
26. (fc1)
    
27. Copyright (c) 1986-2002 by cisco Systems, Inc.
    
28. Compiled Sun 24-Nov-02 23:31 by antonino
    
29. 00:00:10: Bootstrap Emulator called with code 45
    
30. 00:13:08: POST FAILURE: INIT_BIT_ASIC_POST bit is not set
    
31. 
    
32. 00:13:08: POST FAILURE: INIT_BIT_ASIC_INIT bit is not set
    
33. 
    
34. 
    

复制代码

l

light102

00:00:09: %SW_VLAN-4-IFS_FAILURE: VLAN manager encountered file operation error:
是不是问题

ssffzz1

POST FAILURE: INIT_BIT_ASIC_INIT bit is not set

清空配置重启试试。

如果还出问题，多半是硬件了。

light102

试过了，那估计就是硬件的问题了？呵呵