论坛徽章:: 0

电梯直达

1楼 [收藏(0)] [报告]

发表于 2008-12-19 10:55 |只看该作者 |倒序浏览

双机新增了磁带机，没有在线识别到，所以重启了备机，reboot -- r ,但是启动失败了……ＳＵＮ８００的人说是因为用reboot命令不对，应该先让备机退出节点，现在启动失败就是因为备机无法加入双机，但是这边没有买ＣＬＵＳＴＥＲ的服务（汗一个）。附日志，麻烦大家看下。

POST Sequence 11 Master Device
POST Sequence 12 DSCP
POST Sequence 13 SC Check Before STICK Diag
POST Sequence 14 STICK Stop
POST Sequence 15 STICK Start
POST Sequence 16 Error CPU Check
POST Sequence 17 System Configuration
POST Sequence 18 System Status Check
POST Sequence 19 System Status Check After Sync
POST Sequence 1A OpenBoot Start...
POST Sequence Complete.
ChassisSerialNumber BEF08349F8

Sun SPARC Enterprise M5000 Server, using Domain console
Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
Copyright 2008 Sun Microsystems, Inc. and Fujitsu Limited. All rights reserved.
OpenBoot 4.24.8, 32768 MB memory installed, Serial #83997956.
Ethernet address 0:21:28:1:b5:4, Host ID: 8501b504.

Boot device: disk  File and args:
Dec 18 10:35:30 localhost dscpd[668]: Failed to start DSCP for domain0 (error=2)SunOS Release 5.10 Version Generic_137111-06 64-bit
Copyright 1983-2008 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Hostname: hnismpscp2
Booting as part of a cluster
NOTICE: CMM: Node hnismpscp1 (nodeid = 1) with votecount = 1 added.
NOTICE: CMM: Node hnismpscp2 (nodeid = 2) with votecount = 1 added.
NOTICE: CMM: Quorum device 1 (/dev/did/rdsk/d10s2) added; votecount = 1, bitmask of nodes
with configured paths = 0x3.
NOTICE: clcomm: Adapter bge3 constructed
NOTICE: clcomm: Path hnismpscp2:bge3 - hnismpscp1:bge3 being constructed