- 论坛徽章:
- 0
|
感谢朋友“zhht”，“ sxsloin”的热心回复，现在提供更多信息，希望朋友们提供帮助
我的机器是 联想家悦H2411 ， amd的，我下载了openbsd4.4的i386 和 amd64的版本都能正常安装，但都出现上面我所说的问题，就是安装过程一切顺利，完了之后退出安装盘再重新启动就会一片蓝字之后停在了 ddb>的地方了，蓝字不知道怎么搞下来贴上来，我现在又用freebsd7.1 amd64 装了一遍，这装好后就把dmesg的贴过来，希望对分析有帮助，希望各位热心朋友能帮忙分析下，看看是什么问题，或者有什么路子可能解决，dmesg的很长，不好意思啊，多谢各位朋友了！刚学ob就碰丁了，
- Copyright (c) 1992-2009 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 7.1-RELEASE #0: Thu Jan 1 08:58:24 UTC 2009
- [email]root@driscoll.cse.buffalo.edu[/email]:/usr/obj/usr/src/sys/GENERIC
- Timecounter "i8254" frequency 1193182 Hz quality 0
- CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ (2500.10-MHz K8-class CPU)
- Origin = "AuthenticAMD" Id = 0x60fb2 Stepping = 2
- Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
- Features2=0x2001<SSE3,CX16>
- AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
- AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
- Cores per package: 2
- usable memory = 925831168 (882 MB)
- avail memory = 891629568 (850 MB)
- ACPI APIC Table: <LENOVO TC-03 >
- FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP): APIC ID: 1
- ioapic0 <Version 2.1> irqs 0-23 on motherboard
- kbd1 at kbdmux0
- ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
- acpi0: <LENOVO TC-03> on motherboard
- acpi0: [ITHREAD]
- acpi0: Power Button (fixed)
- acpi0: reservation of ffb80000, 80000 (3) failed
- acpi0: reservation of 0, a0000 (3) failed
- acpi0: reservation of 100000, 37f00000 (3) failed
- ACPI HPET table warning: Sequence is non-zero (2)
- Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
- acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
- acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- Timecounter "HPET" frequency 14318180 Hz quality 900
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xf0000000-0xf7ffffff,0xfeaf0000-0xfeafffff,0xfe900000-0xfe9fffff irq 18 at device 5.0 on pci1
- pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0
- pci2: <ACPI PCI bus> on pcib2
- mskc0: <Marvell Yukon 88E8039 Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebfc000-0xfebfffff irq 19 at device 0.0 on pci2
- msk0: <Marvell Technology Group Ltd. Yukon FE Id 0xb7 Rev 0x03> on mskc0
- msk0: Ethernet address: 00:21:85:87:b6:f9
- miibus0: <MII bus> on msk0
- e1000phy0: <Marvell 88E3082 10/100 Fast Ethernet PHY> PHY 0 on miibus0
- e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
- mskc0: [FILTER]
- atapci0: <ATI IXP600 SATA300 controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe8ff800-0xfe8ffbff irq 22 at device 18.0 on pci0
- atapci0: [ITHREAD]
- atapci0: AHCI Version 01.10 controller with 4 ports detected
- ata2: <ATA channel 0> on atapci0
- ata2: [ITHREAD]
- ata3: <ATA channel 1> on atapci0
- ata3: [ITHREAD]
- ata4: <ATA channel 2> on atapci0
- ata4: [ITHREAD]
- ata5: <ATA channel 3> on atapci0
- ata5: [ITHREAD]
- ohci0: <OHCI (generic) USB controller> mem 0xfe8fe000-0xfe8fefff irq 16 at device 19.0 on pci0
- ohci0: [GIANT-LOCKED]
- ohci0: [ITHREAD]
- usb0: OHCI version 1.0, legacy support
- usb0: SMM does not respond, resetting
- usb0: <OHCI (generic) USB controller> on ohci0
- usb0: USB revision 1.0
- uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
- uhub0: 2 ports with 2 removable, self powered
- ohci1: <OHCI (generic) USB controller> mem 0xfe8fd000-0xfe8fdfff irq 17 at device 19.1 on pci0
- ohci1: [GIANT-LOCKED]
- ohci1: [ITHREAD]
- usb1: OHCI version 1.0, legacy support
- usb1: SMM does not respond, resetting
- usb1: <OHCI (generic) USB controller> on ohci1
- usb1: USB revision 1.0
- uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
- uhub1: 2 ports with 2 removable, self powered
- ohci2: <OHCI (generic) USB controller> mem 0xfe8fc000-0xfe8fcfff irq 18 at device 19.2 on pci0
- ohci2: [GIANT-LOCKED]
- ohci2: [ITHREAD]
- usb2: OHCI version 1.0, legacy support
- usb2: SMM does not respond, resetting
- usb2: <OHCI (generic) USB controller> on ohci2
- usb2: USB revision 1.0
- uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
- uhub2: 2 ports with 2 removable, self powered
- ohci3: <OHCI (generic) USB controller> mem 0xfe8fb000-0xfe8fbfff irq 17 at device 19.3 on pci0
- ohci3: [GIANT-LOCKED]
- ohci3: [ITHREAD]
- usb3: OHCI version 1.0, legacy support
- usb3: SMM does not respond, resetting
- usb3: <OHCI (generic) USB controller> on ohci3
- usb3: USB revision 1.0
- uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
- uhub3: 2 ports with 2 removable, self powered
- ohci4: <OHCI (generic) USB controller> mem 0xfe8fa000-0xfe8fafff irq 18 at device 19.4 on pci0
- ohci4: [GIANT-LOCKED]
- ohci4: [ITHREAD]
- usb4: OHCI version 1.0, legacy support
- usb4: SMM does not respond, resetting
- usb4: <OHCI (generic) USB controller> on ohci4
- usb4: USB revision 1.0
- uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
- uhub4: 2 ports with 2 removable, self powered
- ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff000-0xfe8ff0ff irq 19 at device 19.5 on pci0
- ehci0: [GIANT-LOCKED]
- ehci0: [ITHREAD]
- usb5: EHCI version 1.0
- usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
- usb5: <EHCI (generic) USB 2.0 controller> on ehci0
- usb5: USB revision 2.0
- uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
- uhub5: 10 ports with 10 removable, self powered
- umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/11.37, addr 2> on uhub5
- pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
- atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
- ata0: <ATA channel 0> on atapci1
- ata0: [ITHREAD]
- pci0: <multimedia> at device 20.2 (no driver attached)
- isab0: <PCI-ISA bridge> at device 20.3 on pci0
- isa0: <ISA bus> on isab0
- pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
- pci3: <ACPI PCI bus> on pcib3
- acpi_button0: <Power Button> on acpi0
- sio0: configured irq 4 not in bitmap of probed irqs 0
- sio0: port may not be enabled
- sio0: configured irq 4 not in bitmap of probed irqs 0
- sio0: port may not be enabled
- sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
- sio0: type 16550A
- sio0: [FILTER]
- ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
- ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
- ppbus0: <Parallel port bus> on ppc0
- ppbus0: [ITHREAD]
- plip0: <PLIP network interface> on ppbus0
- plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
- lpt0: <Printer> on ppbus0
- lpt0: Interrupt-driven port
- ppi0: <Parallel I/O> on ppbus0
- ppc0: [GIANT-LOCKED]
- ppc0: [ITHREAD]
- atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- atkbd0: [ITHREAD]
- cpu0: <ACPI CPU> on acpi0
- acpi_throttle0: <ACPI CPU Throttling> on cpu0
- acpi_throttle0: CLK_VAL field overlaps THT_EN bit
- device_attach: acpi_throttle0 attach returned 6
- powernow0: <PowerNow! K8> on cpu0
- cpu1: <ACPI CPU> on acpi0
- powernow1: <PowerNow! K8> on cpu1
- orm0: <ISA Option ROM> at iomem 0xcd800-0xce7ff on isa0
- sc0: <System console> at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- sio1: configured irq 3 not in bitmap of probed irqs 0
- sio1: port may not be enabled
- vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- ums0: <vendor 0x04b3 product 0x310d, class 0/0, rev 2.00/43.01, addr 2> on uhub0
- ums0: 3 buttons and Z dir.
- Timecounters tick every 1.000 msec
- ad4: 152627MB <Seagate ST3160815AS 4.CCA> at ata2-master SATA300
- acd0: DVDROM <ATAPI DVD D DH16D2S/EL32> at ata4-master SATA150
- SMP: AP CPU #1 Launched!
- da0 at umass-sim0 bus 0 target 0 lun 0
- da0: <Generic- Compact Flash 1.00> Removable Direct Access SCSI-0 device
- da0: 40.000MB/s transfers
- da0: Attempt to query device size failed: NOT READY, Medium not present
- da1 at umass-sim0 bus 0 target 0 lun 1
- da1: <Generic- SM/xD-Picture 1.00> Removable Direct Access SCSI-0 device
- da1: 40.000MB/s transfers
- da1: Attempt to query device size failed: NOT READY, Medium not present
- da2 at umass-sim0 bus 0 target 0 lun 2
- da2: <Generic- SD/MMC 1.00> Removable Direct Access SCSI-0 device
- da2: 40.000MB/s transfers
- da2: Attempt to query device size failed: NOT READY, Medium not present
- da3 at umass-sim0 bus 0 target 0 lun 3
- da3: <Generic- MS/MS-Pro 1.00> Removable Direct Access SCSI-0 device
- da3: 40.000MB/s transfers
- da3: Attempt to query device size failed: NOT READY, Medium not present
- Trying to mount root from ufs:/dev/ad4s1a
- msk0: link state changed to UP
- Waiting (max 60 seconds) for system process `vnlru' to stop...done
- Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
- Waiting (max 60 seconds) for system process `syncer' to stop...
- Syncing disks, vnodes remaining...1 0 1 0 0 done
- All buffers synced.
- Copyright (c) 1992-2009 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 7.1-RELEASE #0: Thu Jan 1 08:58:24 UTC 2009
- [email]root@driscoll.cse.buffalo.edu[/email]:/usr/obj/usr/src/sys/GENERIC
- Timecounter "i8254" frequency 1193182 Hz quality 0
- CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ (2500.10-MHz K8-class CPU)
- Origin = "AuthenticAMD" Id = 0x60fb2 Stepping = 2
- Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
- Features2=0x2001<SSE3,CX16>
- AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
- AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
- Cores per package: 2
- usable memory = 925831168 (882 MB)
- avail memory = 891629568 (850 MB)
- ACPI APIC Table: <LENOVO TC-03 >
- FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP): APIC ID: 1
- ioapic0 <Version 2.1> irqs 0-23 on motherboard
- kbd1 at kbdmux0
- ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
- acpi0: <LENOVO TC-03> on motherboard
- acpi0: [ITHREAD]
- acpi0: Power Button (fixed)
- acpi0: reservation of ffb80000, 80000 (3) failed
- acpi0: reservation of 0, a0000 (3) failed
- acpi0: reservation of 100000, 37f00000 (3) failed
- ACPI HPET table warning: Sequence is non-zero (2)
- Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
- acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
- acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- Timecounter "HPET" frequency 14318180 Hz quality 900
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xf0000000-0xf7ffffff,0xfeaf0000-0xfeafffff,0xfe900000-0xfe9fffff irq 18 at device 5.0 on pci1
- pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0
- pci2: <ACPI PCI bus> on pcib2
- mskc0: <Marvell Yukon 88E8039 Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebfc000-0xfebfffff irq 19 at device 0.0 on pci2
- msk0: <Marvell Technology Group Ltd. Yukon FE Id 0xb7 Rev 0x03> on mskc0
- msk0: Ethernet address: 00:21:85:87:b6:f9
- miibus0: <MII bus> on msk0
- e1000phy0: <Marvell 88E3082 10/100 Fast Ethernet PHY> PHY 0 on miibus0
- e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
- mskc0: [FILTER]
- atapci0: <ATI IXP600 SATA300 controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe8ff800-0xfe8ffbff irq 22 at device 18.0 on pci0
- atapci0: [ITHREAD]
- atapci0: AHCI Version 01.10 controller with 4 ports detected
- ata2: <ATA channel 0> on atapci0
- ata2: [ITHREAD]
- ata3: <ATA channel 1> on atapci0
- ata3: [ITHREAD]
- ata4: <ATA channel 2> on atapci0
- ata4: [ITHREAD]
- ata5: <ATA channel 3> on atapci0
- ata5: [ITHREAD]
- ohci0: <OHCI (generic) USB controller> mem 0xfe8fe000-0xfe8fefff irq 16 at device 19.0 on pci0
- ohci0: [GIANT-LOCKED]
- ohci0: [ITHREAD]
- usb0: OHCI version 1.0, legacy support
- usb0: SMM does not respond, resetting
- usb0: <OHCI (generic) USB controller> on ohci0
- usb0: USB revision 1.0
- uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
- uhub0: 2 ports with 2 removable, self powered
- ohci1: <OHCI (generic) USB controller> mem 0xfe8fd000-0xfe8fdfff irq 17 at device 19.1 on pci0
- ohci1: [GIANT-LOCKED]
- ohci1: [ITHREAD]
- usb1: OHCI version 1.0, legacy support
- usb1: SMM does not respond, resetting
- usb1: <OHCI (generic) USB controller> on ohci1
- usb1: USB revision 1.0
- uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
- uhub1: 2 ports with 2 removable, self powered
- ohci2: <OHCI (generic) USB controller> mem 0xfe8fc000-0xfe8fcfff irq 18 at device 19.2 on pci0
- ohci2: [GIANT-LOCKED]
- ohci2: [ITHREAD]
- usb2: OHCI version 1.0, legacy support
- usb2: SMM does not respond, resetting
- usb2: <OHCI (generic) USB controller> on ohci2
- usb2: USB revision 1.0
- uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
- uhub2: 2 ports with 2 removable, self powered
- ohci3: <OHCI (generic) USB controller> mem 0xfe8fb000-0xfe8fbfff irq 17 at device 19.3 on pci0
- ohci3: [GIANT-LOCKED]
- ohci3: [ITHREAD]
- usb3: OHCI version 1.0, legacy support
- usb3: SMM does not respond, resetting
- usb3: <OHCI (generic) USB controller> on ohci3
- usb3: USB revision 1.0
- uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
- uhub3: 2 ports with 2 removable, self powered
- ohci4: <OHCI (generic) USB controller> mem 0xfe8fa000-0xfe8fafff irq 18 at device 19.4 on pci0
- ohci4: [GIANT-LOCKED]
- ohci4: [ITHREAD]
- usb4: OHCI version 1.0, legacy support
- usb4: SMM does not respond, resetting
- usb4: <OHCI (generic) USB controller> on ohci4
- usb4: USB revision 1.0
- uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
- uhub4: 2 ports with 2 removable, self powered
- ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff000-0xfe8ff0ff irq 19 at device 19.5 on pci0
- ehci0: [GIANT-LOCKED]
- ehci0: [ITHREAD]
- usb5: EHCI version 1.0
- usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
- usb5: <EHCI (generic) USB 2.0 controller> on ehci0
- usb5: USB revision 2.0
- uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
- uhub5: 10 ports with 10 removable, self powered
- umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/11.37, addr 2> on uhub5
- pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
- atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
- ata0: <ATA channel 0> on atapci1
- ata0: [ITHREAD]
- pci0: <multimedia> at device 20.2 (no driver attached)
- isab0: <PCI-ISA bridge> at device 20.3 on pci0
- isa0: <ISA bus> on isab0
- pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
- pci3: <ACPI PCI bus> on pcib3
- acpi_button0: <Power Button> on acpi0
- sio0: configured irq 4 not in bitmap of probed irqs 0
- sio0: port may not be enabled
- sio0: configured irq 4 not in bitmap of probed irqs 0
- sio0: port may not be enabled
- sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
- sio0: type 16550A
- sio0: [FILTER]
- ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
- ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
- ppbus0: <Parallel port bus> on ppc0
- ppbus0: [ITHREAD]
- plip0: <PLIP network interface> on ppbus0
- plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
- lpt0: <Printer> on ppbus0
- lpt0: Interrupt-driven port
- ppi0: <Parallel I/O> on ppbus0
- ppc0: [GIANT-LOCKED]
- ppc0: [ITHREAD]
- atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- atkbd0: [ITHREAD]
- cpu0: <ACPI CPU> on acpi0
- acpi_throttle0: <ACPI CPU Throttling> on cpu0
- acpi_throttle0: CLK_VAL field overlaps THT_EN bit
- device_attach: acpi_throttle0 attach returned 6
- powernow0: <PowerNow! K8> on cpu0
- cpu1: <ACPI CPU> on acpi0
- powernow1: <PowerNow! K8> on cpu1
- orm0: <ISA Option ROM> at iomem 0xcd800-0xce7ff on isa0
- sc0: <System console> at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- sio1: configured irq 3 not in bitmap of probed irqs 0
- sio1: port may not be enabled
- vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- ums0: <vendor 0x04b3 product 0x310d, class 0/0, rev 2.00/43.01, addr 2> on uhub0
- ums0: 3 buttons and Z dir.
- Timecounters tick every 1.000 msec
- ad4: 152627MB <Seagate ST3160815AS 4.CCA> at ata2-master SATA300
- acd0: DVDROM <ATAPI DVD D DH16D2S/EL32> at ata4-master SATA150
- SMP: AP CPU #1 Launched!
- da0 at umass-sim0 bus 0 target 0 lun 0
- da0: <Generic- Compact Flash 1.00> Removable Direct Access SCSI-0 device
- da0: 40.000MB/s transfers
- da0: Attempt to query device size failed: NOT READY, Medium not present
- da1 at umass-sim0 bus 0 target 0 lun 1
- da1: <Generic- SM/xD-Picture 1.00> Removable Direct Access SCSI-0 device
- da1: 40.000MB/s transfers
- da1: Attempt to query device size failed: NOT READY, Medium not present
- da2 at umass-sim0 bus 0 target 0 lun 2
- da2: <Generic- SD/MMC 1.00> Removable Direct Access SCSI-0 device
- da2: 40.000MB/s transfers
- da2: Attempt to query device size failed: NOT READY, Medium not present
- da3 at umass-sim0 bus 0 target 0 lun 3
- da3: <Generic- MS/MS-Pro 1.00> Removable Direct Access SCSI-0 device
- da3: 40.000MB/s transfers
- da3: Attempt to query device size failed: NOT READY, Medium not present
- Trying to mount root from ufs:/dev/ad4s1a
- msk0: link state changed to UP
|
|
免费注册
发表于 2009-01-31 15:10
