CDE不能启动，感觉象openwindow界面一样

daiqr

系统启动后，不能进入CDE界面。查询root邮件，报告是cdrom无法正常查询。

恳请各位大侠相助！！

liufang

请提供ROOT邮件内容???????????

daiqr

ROOT邮件内容如下：

Subject: H_P_BCC: Event Monitor Notification
Status: RO

>;------------ Event Monitoring Service Event Notification ------------<

Notification Time: Wed Feb 12 09:25:03 2003

H_P_BCC sent Event Monitor notification information:

/storage/events/disks/default/10_0_14_0.0.0 is >;= 3.
Its current value is CRITICAL(5).



Event data from monitor:

Event Time..........: Wed Feb 12 09:25:03 2003
Severity............: CRITICAL
Monitor.............: disk_em
Event #.............: 13                  
System..............: H_P_BCC

Summary:
     Disk at hardware path 10/0/14/0.0.0 : I/O request failed.         


Description of Error:

     As part of the polling functionality, the monitor periodically requests
     data from the device. The monitor's I/O request failed in this case. The
     monitor was requesting data for Test Unit Ready command.

Probable Cause / Recommended Action:

     The monitor could not finish the requested I/O operation to the device.
     Check /etc/opt/resmon/log/api.log file for an entry logged by
     tl_scsi_dev_io request.

Additional Event Data:
     System IP Address...: XX.YY.ZZ.199
     Event Id............: 0x3e49a26f00000000
     Monitor Version.....: B.01.00
     Event Class.........: I/O
     Client Configuration File...........:
     /var/stm/config/tools/monitor/default_disk_em.clcfg
     Client Configuration File Version...: A.01.00
          Qualification criteria met.
               Number of events..: 1
     Associated OS error log entry id(s):
          None
     Additional System Data:
          System Model Number.............: 9000/785
          OS Version......................: B.11.00
          STM Version.....................: A.28.00
          EMS Version.....................: A.03.20
     Latest information on this event:
          http://docs.hp.com/hpux/content/hardware/ems/disk_em.htm#13

v-v-v-v-v-v-v-v-v-v-v-v-v    D  E  T  A  I  L  S    v-v-v-v-v-v-v-v-v-v-v-v-v



Component Data:
     Physical Device Path...: 10/0/14/0.0.0
     Device Class...........: CD-ROM
     Inquiry Vendor ID......: MITSUMI
     Inquiry Product ID.....: CD-ROM FX4830T!B
     Firmware Version.......: R02J
     Serial Number..........: [

Product/Device Identification Information:

     Logger ID.........: disc30; sdisk
     Product Identifier: Disk
     Product Qualifier.: MITSUMI CD-ROM FX4830T!B
     SCSI Target ID....: 0x00
     SCSI LUN..........: 0x00

SCSI Command Data Block:

     Command Data Block Contents:
          0x0000: 00 00 00 00   00 00
     
     Command Data Block Fields (6-byte fmt):
          Command Operation Code...(0x00)..: TEST UNIT READY
          Logical Unit Number..............: 0

Hardware Status:  (not present in log record).

SCSI Sense Data: (not present in log record)


>;---------- End Event Monitoring Service Event Notification ----------<

liufang

我想了一下,1,你的机器起到什么状态??
                2,找一张光盘,MOUNT  一下,试试光驱有没有硬件问题什么的,
                3.新建个光驱设备,我不太会说,或者删了重建,然后重起,
                4..dtprofile有没有??或用备份冲回???
我想可能是CDE找这个设备有问题,或设备冲突,see /etc/fstab
  and #mount 看什么样???