sybase数据库恢提示错误急！！！请教大侠了！！！

zhl6042

两个sybase数据库备份文件，在恢复时分别提示以下信息：
第一个：
Server Message:  Number  3216, Severity  10
Backup Server session id is:  7.  Use this value when executing the 'sp_volchanged' system stored procedure after fulfilling any volume change request from the Backup Server.
Server Message:  Number  602801, Severity  1
Backup Server: 6.28.1.1: Dumpfile name 'cwbase1073440D7FA' section number 0001 mounted on disk file 'E:\cwbase1_dup20071210'
Server Message:  Number  405801, Severity  1
Backup Server: 4.58.1.1: Database cwbase1: 8396 kilobytes LOADed.
Server Message:  Number  405801, Severity  1
Backup Server: 4.58.1.1: Database cwbase1: 17492 kilobytes LOADed.
Server Message:  Number  414102, Severity  2
Backup Server: 4.141.2.65: [0] The 'WriteFile' call failed for device 'E:\cwbase1_dup20071210' with error number 1450 (ち??????我??汤???觅镁???表). Refer to your operating system documentation for further details.
Server Message:  Number  406203, Severity  3
Backup Server Internal Error: 4.62.3.7: Multibuffering subprocesses died, archive E:\cwbase1_dup20071210.
Server Message:  Number  2403, Severity  10
WARNING!  Some character(s) could not be converted into client's character set.  Unconverted bytes were changed to question marks ('?').
Server Message:  Number  8009, Severity  16
Error encountered by Backup Server.  Please refer to Backup Server messages for details.


第二个：



Server Message:  Number  3216, Severity  10
Backup Server session id is:  8.  Use this value when executing the 'sp_volchanged' system stored procedure after fulfilling any volume change request from the Backup Server.
Server Message:  Number  602801, Severity  1
Backup Server: 6.28.1.1: Dumpfile name 'cwbase107016091CA' section number 0001 mounted on disk file 'f:\cwbase1_dup20070116'
Server Message:  Number  405801, Severity  1
Backup Server: 4.58.1.1: Database cwbase1: 8590 kilobytes LOADed.
Server Message:  Number  405801, Severity  1
Backup Server: 4.58.1.1: Database cwbase1: 17828 kilobytes LOADed.
Server Message:  Number  405801, Severity  1
Backup Server: 4.58.1.1: Database cwbase1: 25668 kilobytes LOADed.
Server Message:  Number  405801, Severity  1
Backup Server: 4.58.1.1: Database cwbase1: 37232 kilobytes LOADed.
Server Message:  Number  405801, Severity  1
Backup Server: 4.58.1.1: Database cwbase1: 42976 kilobytes LOADed.
Server Message:  Number  405801, Severity  1
Backup Server: 4.58.1.1: Database cwbase1: 52106 kilobytes LOADed.
Server Message:  Number  405801, Severity  1
Backup Server: 4.58.1.1: Database cwbase1: 60620 kilobytes LOADed.
Server Message:  Number  405801, Severity  1
Backup Server: 4.58.1.1: Database cwbase1: 65788 kilobytes LOADed.
Server Message:  Number  405801, Severity  1
Backup Server: 4.58.1.1: Database cwbase1: 75440 kilobytes LOADed.
Server Message:  Number  100102, Severity  2
Backup Server: 1.1.2.26: Memory allocation failed in bs_remap_runlist for a M_IO_LIST allocation.  This DUMP or LOAD session must exit.
Server Message:  Number  8009, Severity  16
Error encountered by Backup Server.  Please refer to Backup Server messages for details.

WFCJZ

http://bbs2.chinaunix.net/viewthread.php?tid=239812

这个可能对你有所帮助！

zhl6042

但是我的数据只有800MB呀，没有上G.

WFCJZ

你用的是浪潮的吧!具体情况说一下,帮你处理!

camham

windows是否感染病毒了

zhl6042

光明使者好历害，我们是用的是浪潮软件，服务器是中毒了，所有的杀毒软件都无法安装，后来没有办法，把原来的备份文件，以及原数据库文件，SYBASE安装文件复制出来后，进行了系统的重装，重装后进行数据库恢复时出现了此种情况，并且用SYBASE原数据库替换法也是不行，在重新创建了相同大小的数据库进行替换，然后以SA的身份登陆数据库，在MASTER库下可以查询数据，但在数据库下查询时，其分析器就没有反应了！请教大家还有没有其他方法呀？先谢谢了！！！

WFCJZ

如果原业创建的设备还在,只把原来创建的设备COPY过去,将新的建备剪切出去,别把原来的cwmaster COPY过去,只要设备,COPY时把服务停了,需注意在建新设备时一定要与你需COPY过来的设备大小要一致.可以QQ找我:395724159

zhl6042

光明使者：
    你再线吗，你说的那个办法了试了，还是不行,有没有其他另的办法了。SYBASE数据库，可以通过日志恢复吗？已经添加你的QQ。我的QQ:164493934

cxt442

用sybase是够头疼的，遇到问题不好解决

WFCJZ

SYBASE数据库，可以通过日志恢复吗？

如果没有做dump tran的话,用日志恢复是可以的!