freebsd 7.1 使用 Windows® NDIS 驱动程序失败

yoyostone

dmesg 信息如下
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-RELEASE #0: Thu Jan  1 14:37:25 UTC 2009
    [email=root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC]root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC[/email]
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) M processor          900MHz (897.76-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
  Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  AMD Features=0x100000<NX>
real memory  = 1064828928 (1015 MB)
avail memory = 1028321280 (980 MB)
ACPI APIC Table: <A M I  OEMAPIC >
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3f700000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xdc00-0xdc07 mem 0xf7f00000-0xf7f7ffff,0xd0000000-0xdfffffff,0xf7ec0000-0xf7efffff irq 16 at device 2.0 on pci0
agp0: <Intel 82915GM (915GM GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xf7f80000-0xf7ffffff at device 2.1 on pci0
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
pci3: <network, ethernet> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci1: <ACPI PCI bus> on pcib3
ath0: <Atheros 5424/2424> mem 0xfbef0000-0xfbefffff irq 19 at device 0.0 on pci1
ath0: [ITHREAD]
ath0: unable to attach hardware; HAL status 13
device_attach: ath0 attach returned 6
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xd400-0xd41f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xd480-0xd49f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xd800-0xd81f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xd880-0xd89f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xf7eb7c00-0xf7eb7fff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.05, addr 2> on uhub4
ugen0: <PixArt Imaging Inc. Digital_Camera, class 239/2, rev 2.00/6.20, addr 3> on uhub4
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6M SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <vendor 0x15ca USB Optical Mouse, class 0/0, rev 2.00/5.12, addr 2> on uhub1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 897757219 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 76319MB <Seagate ST980811AS 3.ALC> at ata0-master SATA150
GEOM_LABEL: Label for provider ad0s3 is ext2fs//.
GEOM_LABEL: Label for provider ad0s6 is msdosfs/SOFTWARE.
GEOM_LABEL: Label for provider ad0s7 is msdosfs/MEDIA.
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Single Flash Reader 1.00> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s4a


#kldload ndis 时的信息为：
ath0: <Atheros 5424/2424> mem 0xfbef0000-0xfbefffff irq 19 at device 0.0 on pci1
ath0: [ITHREAD]
ath0: unable to attach hardware; HAL status 13
device_attach: ath0 attach returned 6

#kldload ./l1e51x86_sys.ko 时的报错信息为：
link_elf_lookup_symbol:missing symbol hash table

机器型号为EPC904HD
会的帮帮忙。

macafee

HAL_ENOTSUPP    = 13,   /* Hardware revision not supported */

去打http://people.freebsd.org/~sam/ath_hal-releng7.patch这个补丁

或者使用CURRENT8。

[ 本帖最后由 macafee 于 2009-3-19 15:21 编辑 ]

yoyostone