关于sygate的初级问题

lang_zhong

我们单位局域网是限制固定ip上网的

能上网的电脑A 系统XP

ip：10.33.50.88
     255.255.255.0
网关：10.33.50.1
dns：10.33.50.8


不能上网的电脑B 系统XP
ip：10.33.50.170
      255.255.255.0
网关：10.33.50.1
dns：10.33.50.8

我在A机器上装了sygate 4.5 HOME NETWORK，说只需客户机的网关设置为 192.168.0.1 即可

但是不知道为何就是不能上网
电脑B的具体设置是如何的呢
电脑B机器时候需要安装sygate的客户端？

[ 本帖最后由 lang_zhong 于 2009-3-26 12:04 编辑 ]

lang_zhong

10061 is a TCP/IP error which implies that there is a TCP/IP connectivity issue between the local and remote machines.  Here is a possible method of troubleshooting the 10061 error in regard to the Mini Remote Control Service.

Please make sure that you have administrative rights to the remote workstation.

Reset the default TCP port usage(6129) on both local and remote workstations.


Within DWMRC, select the desired host entry and click on the Settings button. On the Remote Options Tab, verify that the Port number is set to 6129 (must match the Remote Client Agent Service port exactly)



To ensure the default port usage(6129) on the remote workstsation:

Stop the DameWare Remote Client Agent Service.
Delete DWRCS.INI from the system32 directory.
Delete the registry entry for the client agent HKEY_LOCAL_MACHINE\SOFTWARE\DameWare Development\DWRCS.
Restart the service.


Other things to consider:

1) There may be some other application using the same port. Stop the service on the remote machine and run "netstat -a". There should be nothing listening on port 6129. If there is, then something else is using the port. If not, then restart the service on the remote machine and you should have something (DMRC) listening on port 6129.

2) If we have verified Step 1 and we get to this point with no resolution, then there must be a Microsoft name resolution/routing problem, because we can query and install a service using the installed protocol via Windows API but we can't communicate with the computer using plain TCP/IP via sockets. This means there is a problem with your network setup. You should be able to duplicate this problem outside of the DNTU/Mini Remote Control software.

a) Verify the IP address and hostname on the remote computer are correct.
b) Attempt to map to a shared resource on the remote computer. If it fails, then resolve any network connectivity problems, and try the Mini Remote Control again.

Additional information:

General Network Configuration & Implementation Issues
http://www.dameware.com/support/kb/article.aspx?ID=300005

Using DameWare Development Products in Conjunction with Windows XP Service Pack 2
http://www.dameware.com/support/kb/article.aspx?ID=300068

Troubleshooting the "Connection Refused" Message - TCP/IP Error 10061
http://www.dameware.com/support/kb/article.aspx?ID=300006

lang_zhong

sygate 4.5 HOME NETWORK，内部网络的网关ip需要设置为 10.33.50.167 地址不重复即可
不能上网的电脑B 系统XP
ip：10.33.50.170
      255.255.255.0
网关：10.33.50.167
dns：10.33.50.167