论坛徽章:: 0

电梯直达

1楼 [收藏(0)] [报告]

发表于 2009-03-27 14:41 |只看该作者 |倒序浏览

请教大虾：我在vmware下安装了solaris x86 Update6用来做镜像盘启动实验，按照下述的步骤操作后不能从镜像盘启动，想请教下该如何解决这个问题。我做的操作如下：
1.bash-3.00# format
Searching for disks...done

AVAILABLE DISK SELECTIONS:
   0. c0d0 <DEFAULT cyl 1302 alt 2 hd 255 sec 63>
      /pci@0,0/pci-ide@7,1/ide@0/cmdk@0,0
   1. c0d1 <DEFAULT cyl 1302 alt 2 hd 255 sec 63>
      /pci@0,0/pci-ide@7,1/ide@0/cmdk@1,0
Specify disk (enter its number): ^D

2.系统盘用的c0d0，安装完毕后

3.bash-3.00# prtvtoc /dev/rdsk/c0d0s0 | fmthard -s - /dev/rdsk/c0d1s2

4.bash-3.00# fdisk -b /usr/lib/fs/ufs/mboot /dev/rdsk/c0d1p0

         Total disk size is 1305 cylinders
         Cylinder size is 16065 (512 byte) blocks

                                             Cylinders
   Partition Status Type       Start End Length %
   ========= ====== ============  ===== === ====== ===
      1    Active Solaris2       1  1304 1304 100

SELECT ONE OF THE FOLLOWING:
1. Create a partition
2. Specify the active partition
3. Delete a partition
4. Change between Solaris and Solaris2 Partition IDs
5. Exit (update disk configuration and exit)
6. Cancel (exit without updating disk configuration)
Enter Selection: 5

5.bash-3.00# /sbin/installgrub /boot/grub/stage1 /boot/grub/stage2 /dev/rdsk/c0d1s
stage1 written to partition 0 sector 0 (abs 16065)
stage2 written to partition 0, 265 sectors starting at 50 (abs 16115)

6.为两块盘做好镜像并同步完后，编辑menu.lst文件，让系统从镜像盘启动

#---------- ADDED BY BOOTADM - DO NOT EDIT ----------
title Solaris 10 10/08 s10x_u6wos_07b X86
findroot (rootfs1,0,a)
kernel /platform/i86pc/multiboot
module /platform/i86pc/boot_archive
#---------------------END BOOTADM--------------------
#---------- ADDED BY BOOTADM - DO NOT EDIT ----------
title Solaris failsafe
findroot (rootfs1,0,a)
kernel /boot/multiboot kernel/unix -s
module /boot/x86.miniroot-safe
#---------------------END BOOTADM--------------------

7.重新启动系统，发现进不了系统。

请各位指教！！！！