- 论坛徽章:
- 0
|
几天前用完机子,关机时直接断了电源。然后今天想用时开机,等了半天还是ping不通。然后通过串口连上,看到信息如下:
screen not found.
Can't open input device.
Keyboard not present. Using ttya for input and output.
Netra t 1120/1125 (2 X UltraSPARC-II 296MHz), No Keyboard
OpenBoot 3.23, 2048 MB memory installed, Serial #12832255.
Ethernet address 8:0:20:c3:cd:ff, Host ID: 80c3cdff.
Boot device: /pci@1f,4000/scsi@3/disk@0,0:a File and args:
停在这里,就不再向下走了,重试着关电重启一直还是这个样子
然后关机后,交换了两块内置硬盘的位置,再启如下:
screen not found.
Can't open input device.
Keyboard not present. Using ttya for input and output.
Netra t 1120/1125 (2 X UltraSPARC-II 296MHz), No Keyboard
OpenBoot 3.23, 2048 MB memory installed, Serial #12832255.
Ethernet address 8:0:20:c3:cd:ff, Host ID: 80c3cdff.
Boot device: /pci@1f,4000/scsi@3/disk@0,0:a File and args:
The file just loaded does not appear to be executable.
{0} ok
可以进到ok状态下了,然后我手工进行了以下命令
{0} ok banner
Netra t 1120/1125 (2 X UltraSPARC-II 296MHz), No Keyboard
OpenBoot 3.23, 2048 MB memory installed, Serial #12832255.
Ethernet address 8:0:20:c3:cd:ff, Host ID: 80c3cdff.
{0} ok boot
Boot device: /pci@1f,4000/scsi@3/disk@0,0:a File and args:
The file just loaded does not appear to be executable.
{0} ok printenv
Variable Name Value Default Value
scsi-initiator-id 7 7
keyboard-click? false false
keymap
ttyb-rts-dtr-off false false
ttyb-ignore-cd true true
ttya-rts-dtr-off false false
ttya-ignore-cd true true
ttyb-mode 9600,8,n,1,- 9600,8,n,1,-
ttya-mode 9600,8,n,1,- 9600,8,n,1,-
pcia-probe-list 1 1
pcib-probe-list 1,3,2,4,5 1,3,2,4,5
enclosure-type 540-3830
banner-name Netra t 1120/1125
energystar-enabled? false
mfg-mode off off
diag-level min min
#power-cycles 331
system-board-serial# 5015606030684
system-board-date 39780132
fcode-debug? false false
output-device screen screen
input-device keyboard keyboard
load-base 16384 16384
boot-command boot boot
auto-boot? true true
watchdog-reboot? false false
diag-file
diag-device disk0 disk1 net
boot-file
boot-device /pci@1f,4000/scsi@3/disk ... disk net
local-mac-address? false false
ansi-terminal? true true
screen-#columns 80 80
screen-#rows 34 34
silent-mode? false false
use-nvramrc? false false
nvramrc devalias vx-rootdiskb /p ...
security-mode none
security-password
security-#badlogins 0
oem-logo
oem-logo? false false
oem-banner
oem-banner? false false
hardware-revision
last-hardware-update
diag-switch? false false
{0} ok
{0} ok
{0} ok
{0} ok boot disk0
Boot device: /pci@1f,4000/scsi@3/disk@0,0 File and args:
The file just loaded does not appear to be executable.
{0} ok boot disk1
Boot device: /pci@1f,4000/scsi@3/disk@1,0 File and args:
SunOS Release 5.10 Version Generic_118833-33 64-bit
Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Hostname: practice1
The / file system (/dev/rdsk/c0t0d0s0) is being checked.
WARNING - Unable to repair the / filesystem. Run fsck
manually (fsck -F ufs /dev/rdsk/c0t0d0s0).
Apr 19 07:12:46 svc.startd[7]: svc:/system/filesystem/usr:default: Method "/lib/
svc/method/fs-usr" failed with exit status 95.
Apr 19 07:12:46 svc.startd[7]: system/filesystem/usr:default failed fatally: tra
nsitioned to maintenance (see 'svcs -xv' for details)
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
Root password for system maintenance (control-d to bypass):
到了这里后无论输密码还是敲回车,都没有反应
无奈之下再次重启,结果ok状态都进不去了,一直是下面的样子(把硬盘换回来和不换都试了,如果一样):
screen not found.
Can't open input device.
Keyboard not present. Using ttya for input and output.
Netra t 1120/1125 (2 X UltraSPARC-II 296MHz), No Keyboard
OpenBoot 3.23, 2048 MB memory installed, Serial #12832255.
Ethernet address 8:0:20:c3:cd:ff, Host ID: 80c3cdff.
就不动了,请高手指点!!! |
|