- 论坛徽章:
- 0
|
#
# Authentication file. Must be mode 600
# 验证文件。模式必须为600
#
# Must have exactly one auth directive at the front.
# auth send authentication using this method-id
# 必须有且只有一个auth指令在前面
# auth method-id 使用这个方法id发送验证
#
# Then, list the method and key that go with that method-id
# 然后列出方法和该方法的密钥
#
# Available methods: crc sha1, md5. Crc doesn't need/want a key.
# 可用的模块:crc、sha1、md5。其中crc不需要一个密钥。
#
# You normally only have one authentication method-id listed in this file
# 通常只放置一个验证方法id在这个文件中
#
# Put more than one to make a smooth transition when changing auth
# methods and/or keys.
# 可以放置多于一个来使得进行验证方法和/或密钥更改的过渡变得平滑
#
#
# sha1 is believed to be the "best", md5 next best.
# sha1被认为是最好的,md5第二。
#
# crc adds no security, except from packet corruption.
# Use only on physically secure networks.
# 除了防止包格式改变,crc不加安全保护。只能使用在物理上的安全网络。
#
#auth 1
#1 crc
#2 sha1 HI!
#3 md5 Hello!
本文来自ChinaUnix博客,如果查看原文请点:http://blog.chinaunix.net/u2/67390/showart_1905533.html |
|