- 论坛徽章:
- 0
|
回复 #1 小桂桂 的帖子
Installation Instructions for NetBackup Client on MS Windows machines
=====================================================================
Version 6.5, August 2008
Before you can get the backup service you need to make sure that
your machine is defined in the Technion DNS (domain name server).
Do:
ping nuster.technion.ac.il (132.68.1.12)
ping buster.technion.ac.il (132.68.1.44)
if you fail to PING one of the above hosts please contact us.
These stages should be appllied to first-time installation.
For an upgrade - no need to remove the old version before installing in
the new one: start at stage 10.
1. On your PC - create (or enter existing) directory C:\temp\NBU6.5
and a directory C:\temp\NBU6.5.1
2. Go to http://backup.technion.ac.il, Choose "Joining & Installation",
then Click on the zip file of the Windows version which fits your
PC hardware.
3. Click on "Save" and save the file in C:\temp\NBU6.5 or another folder
which you set for it.
4. Extract the files from the zip file you chose to C:\temp\NBU6.5
(the file is zipped and needs to be unzipped).
5. Go back to http://backup.technion.ac.il, then Click on the exe file
of the Windows version which fits your PC hardware.
6. Click on "Save" and save the file in C:\temp\NBU6.5.1 or another folder
which you set for it.
Note:
It is important that you save this file in a different location than the
zip file.
7. Close all open applications on your PC.
8. In the directory C:\temp\NBU6.5\x86 (or x64 or IA64) follow the following:
(The instructions are mainly for a new installation.
In an upgrade installation the parameters in the 5th window
should already be there.)
1st Window: Read the Welcome message, wait for the "Next" to be lit,
and click on it.
2nd Window: Mark the "I accept" line, and click "Next".
3rd Window: Mark "Install to this computer only",
& "Typical installation", and click "Next".
4th Window: Client name for this PC:
enter <YOUR-HOSTNAME>.technion.ac.il
(where YOUR-HOSTNAME is the name by which the
Technion name server recognizes your PC).
Master Server Name: Enter: buster.technion.ac.il
Additional Servers: Enter: nuster.technion.ac.il
If your computer-name appears in the 'Additional Servers' box -
erase it from there.
In the "LiveUpdate" box - delete the mark of the line:
"Install LiveUpdate Agent" and click "Next".
5th Window: "To begin..." - click on "Install"
6th window: When you get "Completing the NetBackup Setup Wizard"
click "Finish".
If you encountered a problem at this stage -
please contact us.
If you received a request to restart your computer
continue to '9' first.
Restart the computer in the end of all the instructions here.
9. Mark the Registry file "NBUparams.reg", and merge it into your registry
by double-clicking on it and answering "Yes" when asked to confirm.
10. Go to C:\temp\NBU6.5.1 and double-click on the file that is saved there.
In the window that opens up ('Open File Security Warning') click "Run".
The file will unzip itself (it takes some time).
11. Double-click on the SETUP.EXE file, and after some time the NetBackup
Update Setup Wizard is opened.
1st Window: Click on "Next"
2nd Window: Check that only "Install to this computer only" is checked
and then click on "Next".
3rd Window: In the window "Click Install to begin the Installation" -
click on "Install". Wait till the installtion is finished
with the 'successfully installed' message.
12. If your PC has a firewall running on it (XP MP2 installs it by default)
open it for the backup according to the instructions in the following
documents:
http://seer.entsupport.symantec.com/docs/267977.htm
http://seer.entsupport.symantec.com/docs/268927.htm
If you have a problem at any stage during this installtion -
please call either Miriam at 2177, or Rita at 3871.
or write to backup@tx |
|