免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
12345下一页
最近访问板块 发新帖
查看: 17820 | 回复: 47

[小机硬件] p5面板亮橙黄色信号灯? [复制链接]

论坛徽章:
0
发表于 2009-06-25 14:10 |显示全部楼层
p5面板亮橙黄色信号灯?怎样查其出错信息及清除指示灯报错?

论坛徽章:
0
发表于 2009-06-25 14:35 |显示全部楼层
errpt

论坛徽章:
0
发表于 2009-06-25 14:54 |显示全部楼层
能否说详细些  刚接触这个aix机器

论坛徽章:
0
发表于 2009-06-25 15:16 |显示全部楼层
关注,同样的问题,新手,但是diag后发现这样的错误


A PROBLEM WAS DETECTED ON Thu Jun 25 03:03:46  2009                       801014

The Service Request Number(s)/Probable Cause(s)
(causes are listed in descending order of probability):

  59B-110: Medium format is corrupted.
    hdisk1           FRU: 00P3068              U0.1-P1-Z1-A4
                     16 Bit LVD SCSI Disk Drive (36400 MB)
                     
TESTING SCSI DISK DRIVE hdisk1 IN LOCATION U0.1-P1-Z1-A4                  59B018


The disk drive format is damaged.
Use the Format Media Task to format the disk drive.

Press Enter or Cancel to return to the
application.


ADVANCED DIAGNOSTIC SELECTION                                             801006

From the list below, select any number of resources by moving
the cursor to the resource and pressing 'Enter'.
To cancel the selection, press 'Enter' again.
To list the supported tasks for the resource highlighted, press 'List'.

Once all selections have been made, press 'Commit'.
To avoid selecting a resource, press 'Previous Menu'.


[TOP]
  All Resources
      This selection will select all resources that can be tested.
* sysplanar0                            System Planar
* L2cache0                              L2 Cache
* mem0                                  Memory
* ent1             U0.1-P1/E2           10/100/1000 Base-TX PCI-X Adapter
                                        (14106902)
* fda0             U0.1-P1-X1/D1        Standard I/O Diskette Adapter
M kbd0             U0.1-P1-X1/K1-Lkbd   PS/2 keyboard
[MORE...17]

F1=Help             F4=List             F7=Commit           Esc+0=Exit
F3=Previous Menu


不知道该怎么处理了

机器三块硬盘,两个36g,一个72g,前两个盘只能看到36g空间,应该是做镜像了

[ 本帖最后由 yuio654 于 2009-6-25 15:17 编辑 ]

论坛徽章:
0
发表于 2009-06-25 15:21 |显示全部楼层
cu的单点登录做的不咋地啊。自己的贴不能编辑啦,还又把我整成了新手………………

接上边帖子,机器是p615,黄灯长亮,但是液晶板没有任何显示…………

[ 本帖最后由 yuio654 于 2009-6-25 15:23 编辑 ]

论坛徽章:
1
荣誉会员
日期:2011-11-23 16:44:17
发表于 2009-06-25 15:38 |显示全部楼层
LS不是有人回了吗?用errpt看看有甚么错误。615的机器报警灯很敏感,不一定是有问题,灯亮了,你需要检查一下系统看是不是真的有问题。

论坛徽章:
0
发表于 2009-06-25 15:45 |显示全部楼层
报错信息已经写得比较清楚了,难道还要等人翻译啊

论坛徽章:
0
发表于 2009-06-25 15:50 |显示全部楼层
原帖由 klin121628 于 2009-6-25 15:45 发表
报错信息已经写得比较清楚了,难道还要等人翻译啊



难道要format?

论坛徽章:
0
发表于 2009-06-25 15:59 |显示全部楼层
errpt查看错误信息

diag里消告警灯

论坛徽章:
0
发表于 2009-06-25 16:27 |显示全部楼层
bash-2.01# lspv
hdisk0          0058beac55b31f5e                    rootvg          active
hdisk1          none                                None            
hdisk2          0058beac2c6f1f60                    vg00            active

errpt里没有硬盘相关的错误,晕,不知道该从哪下手了

hdisk1          none                                None    这个正常吗?

[ 本帖最后由 yuio654 于 2009-6-25 16:57 编辑 ]
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP