在sco openserver 5.0.6下 HP380G5添加硬盘

guojing219

我的磁盘阵列显示：
Logical Drive #1 ARID 0,136.7GB Status OK
Logical Drive #2 ARID 1+0,136.7GB Status OK

一个展开是：
Port 2I,Box 1,Bay 1,146.8GB SAS Drive OK
第二个展开是：
Port 2I,Box 1,Bay 3,146.8GB SAS Drive OK
Port 2I,Box 1,Bay 2,146.8GB SAS Drive OK


现在只能显示一个硬盘，现在想要添加硬盘，请问如何设置呢？

host=0
Bus=0
Id=?
LUN=0
这样的设置对吗？

哪位大侠有详细的添加硬盘的资料啊 ？

fwd

host=0
Bus=0
Id=1
LUN=0

guojing219

# ls -l *hd*
brw-------   1 sysinfo  sysinfo    1, 47 Nov  4  2008 hd0a
brw-r-----   1 dos      sysinfo    1, 48 Nov  4  2008 hd0d
brw-------   1 sysinfo  sysinfo    1,  0 Jul  1 10:20 hd00
brw-------   1 sysinfo  sysinfo    1, 15 Nov  4  2008 hd01
brw-------   1 sysinfo  sysinfo    1, 23 Nov  4  2008 hd02
brw-------   1 sysinfo  sysinfo    1, 31 Nov  4  2008 hd03
brw-------   1 sysinfo  sysinfo    1, 39 Nov  4  2008 hd04
brw-------   1 sysinfo  sysinfo    1,111 Jul  1 09:56 hd1a
brw-r-----   1 dos      sysinfo    1,112 Jul  1 09:56 hd1d
brw-------   1 sysinfo  sysinfo    1, 64 Jul  1 09:56 hd10
brw-------   1 sysinfo  sysinfo    1, 79 Jul  1 09:56 hd11
brw-------   1 sysinfo  sysinfo    1, 87 Jul  1 09:56 hd12
brw-------   1 sysinfo  sysinfo    1, 95 Jul  1 09:56 hd13
brw-------   1 sysinfo  sysinfo    1,103 Jul  1 09:56 hd14
crw-------   1 sysinfo  sysinfo    1, 47 Nov  4  2008 rhd0a
crw-r-----   1 dos      sysinfo    1, 48 Nov  4  2008 rhd0d
crw-------   1 sysinfo  sysinfo    1,  0 Nov  4  2008 rhd00
crw-------   1 sysinfo  sysinfo    1, 15 Nov  4  2008 rhd01
crw-------   1 sysinfo  sysinfo    1, 23 Nov  4  2008 rhd02
crw-------   1 sysinfo  sysinfo    1, 31 Nov  4  2008 rhd03
crw-------   1 sysinfo  sysinfo    1, 39 Nov  4  2008 rhd04
crw-------   1 sysinfo  sysinfo    1,111 Jul  1 09:56 rhd1a
crw-r-----   1 dos      sysinfo    1,112 Jul  1 09:56 rhd1d
crw-------   1 sysinfo  sysinfo    1, 64 Jul  1 09:56 rhd10
crw-------   1 sysinfo  sysinfo    1, 79 Jul  1 09:56 rhd11
crw-------   1 sysinfo  sysinfo    1, 87 Jul  1 09:56 rhd12
crw-------   1 sysinfo  sysinfo    1, 95 Jul  1 09:56 rhd13
crw-------   1 sysinfo  sysinfo    1,103 Jul  1 09:56 rhd14
#
这个是/dev/下面的关于hd的文件，请问第2个硬盘到底添加进去没？
为什么fdisk后显示还是下面的内容呢？
# fdisk
        1. Display Partition Table
        2. Use Entire Disk for UNIX
        3. Use Rest of Disk for UNIX
        4. Create UNIX Partition
        5. Activate Partition
        6. Delete Partition
        7. Create Partition
Enter your choice or 'q' to quit: 1
Current Hard Disk Drive: /dev/rhd00
        +-------------+----------+-----------+---------+---------+---------+
        | Partition   | Status   | Type      |   Start |     End |    Size |
        +-------------+----------+-----------+---------+---------+---------+
        | 1           | Active   | UNIX      |       1 | 8958404 | 8958404 |
        +-------------+----------+-----------+---------+---------+---------+
Total disk size: 8958660 tracks (256 reserved for masterboot and diagnostics)
Press <Return> to continue

guojing219

下面是我安装第2块硬盘的过程，是过程出错了吗？
#
# mkdev hd
Your rootdisk is attached to a SCSI controller.
Pick one of the choices below or you may quit and
invoke mkdev hd -u for a detailed usage message.
                1) Add a hard disk to IDE controller
                2) Add a hard disk to SCSI controller
                3) Add a hard disk to IDA controller

Enter 1, 2, 3 or enter 'q' to quit: 2
Enter the prefix of the SCSI host adapter that supports this device
or press <Return> for the default: 'hpsas'
Enter h for a list of host adapters or enter q to quit:

Which 'hpsas' SCSI host adapter supports this device?
Select 0-1, or enter q to quit: 0
The Host Adapter parameters will be automatically configured

What SCSI Bus is this device attached to?
Press <Return> to use the default:0
Select 0-n, or h for help, or q to quit: 0

What is the Target ID for this device?
Select 0-15, or h for help, or q to quit: 1

is the LUN of this device?
Press <Return> to use the default: 0
Select 0-7, or h for help, or q to quit: 0
Disk already configured as disk number 1 (/dev/dsk/1s0)
During installation you may choose to overwrite all
or part of the present contents of your hard disk.

Do you wish to continue? (y/n) y
The hard disk installation program will now invoke /etc/fdisk.
Entering 'q' at the following menu will exit /etc/fdisk,
and the hard disk installation will continue.
If you wish to exit the entire installation at this menu,
press the <DEL> key.

        1. Display Partition Table
        2. Use Entire Disk for UNIX
        3. Use Rest of Disk for UNIX
        4. Create UNIX Partition
        5. Activate Partition
        6. Delete Partition
        7. Create Partition

Enter your choice or 'q' to quit: 1
Current Hard Disk Drive: /dev/rdsk/1s0
        +-------------+----------+-----------+---------+---------+---------+
        | Partition   | Status   | Type      |   Start |     End |    Size |
        +-------------+----------+-----------+---------+---------+---------+
        | 1           | Active   | UNIX      |       1 | 8958404 | 8958404 |
        +-------------+----------+-----------+---------+---------+---------+
Total disk size: 8958660 tracks (256 reserved for masterboot and diagnostics)
Press <Return> to continue
Enter your choice or 'q' to quit: q
scsi version = 7
vendor = HP
product = LOGICAL VOLUME
        1. Scan entire UNIX partition
        2. Scan a specified range of blocks
        3. Scan a specified filesystem
        4. List current bad block table
        5. Add entries to bad block table
        6. Delete entries from bad block table
        7. Clear bad block table
        8. Re-allocate bad blocks

Enter your choice or q to quit: q
0 bad blocks have been found.
Enter the number of bad blocks to allocate space for
or press <Return> to use the existing value of 4095.
WARNING: Changing the value will remove all filesystems in this partition:
+-------------------+------------+--------+---+-------------+------------+
| Name              | Type       | New FS | # | First Block | Last Block |
+-------------------+------------+--------+---+-------------+------------+
|                   | HTFS       |  no    | 0 |            0|       51199|
|                   | HTFS       |  no    | 1 |        51200|   142470239|
|                   | HTFS       |  no    | 2 |    142470240|   142675039|
|                   | HTFS       |  no    | 3 |    142675040|   142879839|
|                   | HTFS       |  no    | 4 |    142879840|   142920799|
|                   | HTFS       |  no    | 5 |    142920800|   143176799|
|                   | HTFS       |  no    | 6 |    143176800|   143330399|
| hd1a              | WHOLE DISK |  no    | 7 |            0|   143334463|
+-------------------+------------+--------+---+-------------+------------+
143330400 1K blocks for divisions, 4064 1K blocks reserved for the system
n[ame]       Name or rename a division.
c[reate]     Create a new file system on this division.
d[elete]     Delete a file system on this division.
t[ype]       Select or change filesystem type on new filesystems.
p[revent]    Prevent a new file system from being created on this division.
s[tart]      Start a division on a different block.
e[nd]        End a division on a different block.
r[estore]    Restore the original division table.
Enter your choice or q to quit: q

i[nstall]      Install the division set-up shown
r[eturn]       Return to the previous menu
e[xit]         Exit without installing a division table
Please enter your choice: i
Hard disk initialization procedure completed.
#