免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 2810 | 回复: 1

[归档与迁移] cx300 更换故障SPA后,LUN无法迁移过去 [复制链接]

论坛徽章:
1
2015年迎新春徽章
日期:2015-03-04 09:54:45
发表于 2009-07-17 16:59 |显示全部楼层
问题如下,CX300盘柜,控制器SPA故障,带电更换SPA后,硬件正常,目前所有的LUN还在SPB上,原属于SPA的LUN无法切换到SPA上,手工执行后,大概一分钟,还会从SPA切换到SPB上,极度郁闷中,是否需要重启盘柜及两台数据库呢?

论坛徽章:
1
2015年迎新春徽章
日期:2015-03-04 09:54:45
发表于 2009-07-17 20:58 |显示全部楼层
大牛们,怎么提醒下呀。数据快备份完了。准备重启。这是戴尔给的步骤。

请测试:

From Navisphere Manager:
  
Enter engineering mode on the CLARiiON array. (From Navisphere, press ctrl-shift-F12 and enter messner as the password.)
Right-click the Storage Group the host is in.
Select Properties.
Go to the hosts tab.
Click the Advanced button.
Check all boxes.
Click Apply.
  
On the host:
  
Rescan the disks in the operating system.
Issue the powermt config command. (This command is not needed for PowerPath 4.x for Windows.)


同时使用powermt display,看看有没有四个路径
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP