- 论坛徽章:
- 0
|
现在还有不多的一些职位Open,希望感兴趣的朋友可以抓紧机会试一试。公司待遇还算中等偏上一些吧,总的来说比华为中兴还是轻松多了,性价比还是不错的。
兄弟们如有中意的职位,请发简历到winterslong@163.com, 请注明你中意的职位,建议最多1,2个职位。需要中英文简历,有些职位(比如ADP,MAS部门)对英语要求比较高,因为二面需要由老外面试,内部推荐哦。
工作地点:上海张江
Open Positions(9月18号更新):
Transport
-1 Staff Engineer (Transport 7100 System)
-1 Staff Engineer (Transport HW CCR)
-1 Engineer (Transport HW CCR)
-1 Sr. Engineer (Transport HW)
-1 Engineer (Transport Validation)
MAS China
- 2 Engineers (MAS China SW)
- 2 Engineers (MAS China Test)
ADP China
-1 Engineer (ADP China HW)
-2 Engineers (ADP China Firmware)
-1 Engineer (Transport HW CCR)
Global Operations
-1 Sr. Engineer (NPI China Test)
-1 Staff Engineer (NPI China Test)
-1 Supplier Development Engineers (Global Sourcing-China)
-1 Component Engineer (Global Sourcing-China)
-1 Mechanical Commodity Manager (Global Sourcing-China)
Access China
-1 Sr. Engineer (Access China HW)
-1 Sr. Engineer (Access China SW)
-1 Sr. Engineer (BB EMS Software)
-1 Sr. Engineer (BB EMS Test)
--------------------------------------------------------------------------------------------------------
1. Access China
--------------------------------------------------------------------------------------------------------
Sr. Engineer (Access Hardware)
Job Description:
- Be a member of the Tellabs Broadband product team in Shanghai.
- The candidate will 50% focus on POTS and the other 50% on digital design.
- Responsibilities include detailed circuit design; schematic capture, hardware design/layout reviews, component selection, device/module characterization, debug, and validation.
- Activities are self-determined and involve the assessment and resolution of complex problems at the project/functional level.
Requirements:
- 4+ years hands-on experiences in analog and digital circuit design in broadband access product.
- Experience with specific microprocessor architectures, including 8051, ARM, PowerPC, 68000, MIPS.
- Skilled in the design of POTS circuit.
- Be able to design to and verify design against GR-57 requirements for both Transmission and Signaling
- Skilled in good board layout practices (for Lightning, Powercross, ESD, EMI, CrossTalk, protection ground, use of planes, decoupling consideration)
- Familiar with CAD tools such as Mentor.
- Experience with Ethernet switch, DSL and PON are preferred.
- Printed circuit board design experience with high speed signal integrity analysis is a plus.
- Hands on product and system testing, product qualification is required.
- Extensive experience in working with component vendors is required.
- Good verbal, interpersonal, and technical leadership skills.
Sr. Engineer (Access NE Software)
Job Description:
- Design, code, and test embedded software for broadband and narrowband access products.
- Individual will also participate in product requirements analysis.
Requirements:
- 4 to 7 years embedded software development experience on Telecommunication products.
- Experience in C language used in real-time embedded operating system.
- Experience in Object-Oriented Analysis and Design, and proficiency writing C++ code in real world applications.
- Experience with real-time coding, debugging and testing in a Linux and VxWorks environment.
- Knowledge of ATM, VoIP, GR-303 and V5 is required.
- Knowledge of Ethernet L2 bridge, VLAN, IGMP, LACP, DHCP, Radius etc L2/L3 protocol is required.
- Excellent verbal and written communication skills, including proficiency in English.
- Bachelor degree or above
Sr. Engineer (Broadband EMS Development)
Job Description:
- Develop Tellabs T1000/1150 Integrated Network Management System (INM) applications with responsibility to ensure consistent implementations and problem resolutions.
- Develop new features on Element Management System (EMS) NBI interface to Operations Support System (OSS).
- Job expectations also include requirements analysis and breakdown to high level designs, writing detailed design documentation, and developing code in C++ or Java.
Requirements:
- Candidates must have excellent organizational, verbal and written communication skills, including proficiency in English.
- A minimum of 4 years software development experience in developing management systems for telecom or datacom products.
- Typical management concepts like FCAPS are required.
- Fluent c++ and java language programming skills
- Knowledge on Solaris OS is desired.
- Knowledge on GDMO/TL1 is desired.
- BS or MS degree in Electrical Engineering or Computer Engineering or Equivalent
Sr. Engineer (Broadband EMS Test)
Job Description:
Broadband Access Product EMS System testing for the Access Network Management. Responsibility includes the following:
- Planning and executing software tests
- Test automation Developing and executing ATC
- Reporting test results and defects
Requirements:
Experience Required
- BSc/MSc in software and/or telecommunication
- 3+ years software test experience
Experience / Knowledge Desired
- TMF
- Telecom Knowledge (e.g. ATM, ETHERNET, PON)
- ?OS and Database knowledge (e.g. Solaris, Oracle)
- Test automation or programming skills (e.g. JAVA, Tcl, or QTP)
Skills Required
- ?Excellent communication skills (both verbal & written English).
- Teamwork capability
--------------------------------------------------------------------------------------------------------
2. MAS China
--------------------------------------------------------------------------------------------------------
Engineer (MAS China Software)
Job Description:
Software development for the 8000 network manager. Responsibility includes the following:
? Software design, coding and testing.
? Teamwork in a project team.
? Maintaining the existing code base and documentation.
Requirements:
Experience Required
? BSc/MSc in software and/or telecommunication
? 2+ years software development experience (Java and/or C++)
Experience / Knowledge Desired
? Operating systems (Windows/Linux)
? SOA, XML, SQL
? TMF MTOSI
? Telecom Knowledge (e.g. IP/MPLS, SDH/SONET, DWDM, ETHERNET, ATM)
Skills Required
? Excellent communication skills (both verbal & written English).
? Teamwork capability
Engineer (MAS China Test)
Job Description:
Integration testing for the 8000 network manager. Responsibility includes the following:
? Planning and executing software tests
? Test automation
? Reporting test results and defects
Requirements:
Experience Required
? BSc/MSc in software and/or telecommunication
? 2+ years software test experience
Experience / Knowledge Desired
? Test automation or programming skills ( e.g. JAVA, C++ or QTP)
? TMF MTOSI
? Telecom Knowledge (e.g. IP/MPLS, SDH/SONET, DWDM, ETHERNET, ATM)
Skills Required
? Excellent communication skills (both verbal & written English).
? Teamwork capability
--------------------------------------------------------------------------------------------------------
3. ADP China
--------------------------------------------------------------------------------------------------------
Engineer (Transport Hardware CCR)
Job Description:
- The selected candidate for this position will be a member of the Tellabs HW team in Shanghai. Job expectations include Shanghai design team contributor in new module and HW C/R effort related to optical modules of various types. Responsibilities in detail design; circuit design, schematic work, reviewing designs, component selection, device characterization and validation along with creating manufacturing test solution development. Candidate need to be able to manage supplier companies. This individual can also get involved in product Support effort; analyze field failures, manufacturing yield problems and corrective action.
Requirements:
- Minimum 1-2 yrs experience
- Design experience with telecom products related to SONET / SDH, Ethernet/WAN/LAN, packet based products.
- Design experience with SFI-4, SFI-5, Telecom bus, or other high speed DDR interfaces.
- Fiber Optics transceiver, optical amplifier, ROADM designs implementation experience with any of the above Sonet rates or Ethernet.
- Discrete and detail design of laser/receiver
- Design experience with signal integrity and clock rates > 600 MHZ and up to 10G traces.
- Familiar with lab equipment associated with the position
- Microprocessor and power supply design experience
- CPLD and FPGA design experience a plus.
- SMT technology design experience
- Microprocessor and power supply design experience
Hardware Engineer (ADP China)
Job Description:
- Member of a team of hardware development engineers dedicated to Tellabs 8800 development and sustaining.
- The candidate will perform digital circuit design, including implementation of high speed I/Os at the board level, and high-speed bus and clock termination techniques. The position will involve design and development of cards utilizing Microprocessors, Network Processors, FPGA/CPLD, Memory, Framers and Line Interface ICs for SONET and Ethernet, and chip to chip interfaces using PCI, PCIe, SPI, I2C, POS3, DDR, DDR2, XAUI, SGMII, RGMII, CPU Host bus interfaces and high speed Serdes Interfaces.
- Responsibilities will include taking board designs from conception through full production, including the utilization of schematic capture, PCB layout, and logic & signal integrity simulation tools.
Requirements:
- BSEE/MSEE with minimum 2 years experience.
- Familiar with high speed digital design techniques for the networking and Telecom industries.
- Experience working in design and development in data products for telecommunications applications, preferably involving network processors, microprocessors, FPGAs, network processors, advanced memories, optics, and high speed digital PCB designs.
- Must be familiar with Ethernet, ATM, and SONET protocols.
- Must have excellent written and verbal communications skills and be fluent in English.
- Excellent verbal and written communication skills, including proficiency in English.
Firmware Engineer (ADP China)
Job Description:
-
The candidate will be a member of a team developing a Multi-Service Routing Platform. Individual will support Hardware development team in design, code, unit test and integration.
-
The candidate will have extensive embedded network element software design experience as it pertains to provisioning, fault handling, software download, and performance monitoring. The position will involve design and development of firmware and drivers for cards utilizing framers and line interface ICs including OC3, OC12, Ethernet, ATM, IP, T1/T3, and Network Processors
-
The candidate should be a detail oriented team player with a solid record of producing high quality products, in a fast paced and flexible environment.
Requirements:
-
BSCS, BSCE, or BSEE required. MS preferred.
-
Experience with Power PC Architecture
-
Proficiency coding in C in an embedded application
-
Experience working with real-time debugging & profiling tools, VxWorks, Clearcase, and Clearquest
-
Familiarity with IP MPLS Routing
-
Familiarity with ATM a plus
-
3 years overall embedded Software engineering experience in a Telecommunications or Data Networking field.
-
Bachelor degree or above
--------------------------------------------------------------------------------------------------------
4. Others
--------------------------------------------------------------------------------------------------------
Staff Engineer (NPI China Test)
Job Description:
- Technical leadership of the Test Engineering staff in Tellabs Operations, China.
- Tactical leadership responsibility for the Tellabs, China Test Engineering projects.
- Support the recruitment of Test Engineers, as we grow the organization.
- Perform role of Test Engineering Liaison by working with all R&D teams for all the product lines in Tellabs China, for the Ops TE development teams located worldwide.
- Design and Development of manufacturing test solutions for all Tellabs products both designed within and outside of China.
- Understanding of DFT, ICT and Boundary Scan for upstream manufacturing test process. Experienced in the development of BSCAN test SW.
- Design and development of complete Functional Test and System Test solutions based on product test specifications.
- Design and development of test HW and SW, HW/SW integration, test solution validation.
- Deployment of test solutions to EMS and R&R locations.
- Training for EMS and R&R technical staff and TellabsTest Engineers at EMS locations.
- Provide tester and product diagnostic support for Tellabs Test Engineers at EMS locations.
Requirements:
- Previous technical leadership experience.
- Previous engineering project management experience.
- At least 10 years experience developing test solutions for Telecom products.
- Working knowledge of Visual Studio.net, C#.net, C, C++, Test Stand, Lab Windows/CVI.
- Strong design and development experience with embedded diagnostics and operational test code.
- Experience with GPIB, USB and serial port controlled high speed data and optical instrumentation.
- Hands-on design and development history and experience with test development for telecom products that include but not limited to DSx, OC3, OC12, OC48, OC192, GE and 10GE protocols.
- Experience with board level debug and diagnostic.
- Working knowledge of test interface design using CAD tools.
- Require fluency in both English and Chinese oral and written communication skills.
Sr. Engineer (NPI China Test)
Job Description:
- Perform role of Test Engineering Liaison by working with all R&D teams for all the product lines in Tellabs China, for the Ops TE development teams located worldwide.
- Design and Development of manufacturing test solutions for all Tellabs products both designed within and outside of China.
- Understanding of DFT, ICT and Boundary Scan for upstream manufacturing test process. Experienced in the development of BSCAN test SW.
- Design and development of complete Functional Test and System Test solutions based on product test specifications.
- Design and development of test HW and SW, HW/SW integration, test solution validation.
- Deployment of test solutions to EMS and R&R locations.
- Training for EMS and R&R technical staff and TellabsTest Engineers at EMS locations.
- Provide tester and product diagnostic support for Tellabs Test Engineers at EMS locations.
Requirements:
- At least 5 years experience developing test solutions for Telecom products.
- Working knowledge of Visual Studio.net, C#.net, C, C++, Test Stand, Lab Windows/CVI.
- Experience with embedded diagnostics and operational test code.
- Experience with GPIB, USB and serial port controlled high speed data and optical instrumentation.
- Experience with test development for telecom products that include but not limited to DSx, OC3, OC12, OC48, OC192, GE and 10GE protocols.
- Experience with board level debug and diagnostic.
- Working knowledge of test interface design using CAD tools.
- Require fluency in both English and Chinese oral and written communication skills.
- BSEE/MSEE or equivalent required.
Engineer (NPI China Manufacturing)
Job Description:
- Performs design reviews on new products.
- Ensures supply chain requirements are gathered and presented during product development.
- Represents supply chain in manufacturability decisions.
- Performs BOM reviews to insure part number and BOM structure adhere to global standards, reviews and approves ECO’s.
- Participates in new component reviews to determine suitability for use.
- Serves as technical interface with Prototype CM to resolve quality, process and design issues.
- Responsible to collect and communicate prototype manufacturability issues (DFM, DFT, yield, etc.) to Engr and Test Engr.
- Reviews and approves production CM work instructions.
- Ensures process readiness for pilot builds at production CM and works with CM to resolve quality, process and design issues during transition from Pilot to Production.
Requirements:
- At least 3 years work experience.
- Expert knowledge of SMT and assembly processes
- Experience in: performing design reviews, DFM analysis, Design of Experiments, root cause analysis, defect prevention techniques, lean manufacturing, quality processes.
- Require fluency in both English and Chinese oral and written communication skills.
- BE/IE/PE or equivalent required.
[ 本帖最后由 winterslong 于 2009-9-18 09:33 编辑 ] |
|