- 论坛徽章:
- 0
|
以下是操作的步骤.就是无法到OK状态下,有谁指点一下呀,谢谢.
ALOM BOOTMON v1.2.4
ALOM Build Release: 000
Reset register: f0000000 EHRS ESRS LLRS SWRS
ALOM POST 1.0
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake ESC keypress detected.
ALOM <ESC> Menu
e - Erase ALOM NVRAM.
m - Run POST Menu.
R - Reset ALOM.
r - Return to bootmon.
Your selection: e
ALOM NVRAM erased.
ALOM <ESC> Menu
e - Erase ALOM NVRAM.
m - Run POST Menu.
R - Reset ALOM.
r - Return to bootmon.
Your selection: r
ALOM POST 1.0
Status = 00007fff
Returned from Boot Monitor and Handshake
Instruction CACHE Test
DISABLE the I-CACHE
ENABLE the I-CACHE
Verify I-CACHE Performance Increase
Instruction CACHE Test, PASSED.
Memory Cells Test
Counting UP: Write data: 00000000
Counting DOWN: Read - Verify - Write data: ffffffff
Counting UP: Read - Verify - Write data: 55aa33cc
Memory Cells Test, PASSED.
Data CACHE Test
Verify D-CACHE Performance Increase
D-CACHE Performance Increase I-CACHE Disabled
D-CACHE Performance Increase I-CACHE Enabled
Verify D-CACHE Memory
Data CACHE Test, PASSED.
Main Sectors FLASH CRC Test
Main Sectors FLASH CRC Test, PASSED.
Loading the runtime image... VxWorks running.
Starting Advanced Lights Out Manager CMT v1.2.4
Copyright 2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Current mode: NORMAL
Attaching network interface lo0... done.
Attaching network interface motfec0.... done.
Booting from Segment 1
Sun(tm) Advanced Lights Out Manager CMT v1.2.4
Full VxDiag Tests
BASIC TOD TEST
Read the TOD Clock: TUE AUG 11 04:50:51 2009
Wait, 1 - 3 seconds
SC Alert: Preceding SC reset due to watchdog
SC Alert: SC System booted.
Read the TOD Clock: TUE AUG 11 04:50:53 2009
BASIC TOD TEST, PASSED
ETHERNET CPU LOOPBACK TEST
50 BYTE PACKET - a 0 in field of 1's.
50 BYTE PACKET - a 1 in field of 0's.
900 BYTE PACKET - pseudo-random data.
ETHERNET CPU LOOPBACK TEST, PASSED
Full VxDiag Tests - PASSED
Status summary - Status = 7FFF
VxDiag - - PASSED
POST - - PASSED
LOOPBACK - - PASSED
I2C - - PASSED
EPROM - - PASSED
FRU PROM - - PASSED
ETHERNET - - PASSED
MAIN CRC - - PASSED
BOOT CRC - - PASSED
TTYD - - PASSED
TTYC - - PASSED
MEMORY - - PASSED
MPC885 - - PASSED
sc>
sc> poweron
sc>
SC Alert: Host System has Reset
sc> console -f
Enter #. to return to ALOM..(然后就是没反应,#.可以回SC状态)
SC Alert: Host system has shut down.
SC Alert: Host System has Reset
SC Alert: Host system has shut down.
sc> setdefaults -a
Are you sure you want to reset the SC configuration and users [y/n]? y
sc> resetsc
Are you sure you want to reset the SC [y/n]? y
User Requested SC Shutdown
ALOM POST 1.0
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
Memory Data Lines Test
Memory Data Lines Test, PASSED.
Memory Address Lines Test
Slide address bits to test open address lines
Test for shorted address lines
Memory Address Lines Test, PASSED.
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
Return to Boot Monitor for Handshake
ALOM POST 1.0
Status = 00007fff
Returned from Boot Monitor and Handshake
Loading the runtime image... VxWorks running.
Starting Advanced Lights Out Manager CMT v1.2.4
Copyright 2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Current mode: NORMAL
Attaching network interface lo0... done.
Attaching network interface motfec0.... done.
Booting from Segment 1
Full VxDiag Tests
BASIC TOD TEST
Read the TOD Clock: TUE AUG 11 04:59:33 2009
Wait, 1 - 3 seconds
SC Alert: SC System booted.
Read the TOD Clock: TUE AUG 11 04:59:35 2009
BASIC TOD TEST, PASSED
ETHERNET CPU LOOPBACK TEST
50 BYTE PACKET - a 0 in field of 1's.
50 BYTE PACKET - a 1 in field of 0's.
900 BYTE PACKET - pseudo-random data.
ETHERNET CPU LOOPBACK TEST, PASSED
Full VxDiag Tests - PASSED
Status summary - Status = 7FFF
VxDiag - - PASSED
POST - - PASSED
LOOPBACK - - PASSED
I2C - - PASSED
EPROM - - PASSED
FRU PROM - - PASSED
ETHERNET - - PASSED
MAIN CRC - - PASSED
BOOT CRC - - PASSED
TTYD - - PASSED
TTYC - - PASSED
MEMORY - - PASSED
MPC885 - - PASSED
sc>
sc> poweron
Warning: the poweron command is being ignored because the password for admin is not set.
Setting password for admin.
New password: *****
SC Alert: Host system has shut down.
***
Re-enter new password: ********
sc> poweron
sc>
SC Alert: Host System has Reset
SC Alert: Host system has shut down.
sc> console -f
Enter #. to return to ALOM.(然后就是没反应,#.可以回SC状态) |
|
免费注册
发表于 2009-08-11 13:34
发表于 2009-08-11 13:50
