zhcon无法运行

freeman_super

刚装好的zhcon，第一次启动遇到如下故障:
提示错误如下：
(configfile.cpp) can not open config file /usr/local/usr/local/etc/zhcon.conf
Could not open config file!

不知这个路径是在哪里更改
望知道的朋友帮个忙 谢谢了

snow888

查 /usr/local/usr/local/etc/zhcon.conf 是否存在？

freeman_super

不存在
/usr/local/etc/zhcon.conf这个文件存在
故障应该是启动的时候目录选择错了
自己多添加了一个/usr/local请问这个如何修改啊

snow888

我没遇到这个问题，不过可以提供一个解决思路。

# mkdir -p /usr/local/usr/local/etc
# cd /usr/local/usr/local/etc
# ln -s /usr/local/etc/zhcon.conf zhcon.conf

你试试看

freeman_super

出现新的故障
============== I'm really sorry, but... ================
I can not open graphical device on this machine, this can happen when:
1. your kernel does not have framebuffer device enabled, check the output from `dmesg|grep

vesa`
2. you are running on a non-i386 machine so no VGA support
3. you are running under X-Window but libggi is not compiled in (required for running zhcon

under X-Window)

Don't be panic by this message, thousands of people have run zhcon successfully, surely you

can!
I suggest you visit http://zhcon.sourceforge.net for more information, or send an email to

zhcon-users@lists.sourceforge.net
I'm pretty sure your problem will be solved very quickly
You can subscribe to the list on https:// lists.sourceforge.net/lists/listinfo/zhcon-users

Good Luck!