SUN STK6540 升级firmware问题

glfeng

昨天给用户升级SUN STK6540 升级firmware，版本06.19.**----06.60.20.**，
过程中出了错，没有升过去，控制器有黄灯告警，就是“！”的灯告警，
报错如下:Event log issues:
            Too many critical events logged
            Too many destination driver events

除了用CAM，好有其他方法吗？
谢谢各位大侠了！！！！！！！！！

以下是log：
[Aug 12, 2009 3:33:45 PM] [upgrade utility] [application] [application start up]
Application started: 8/12/09 3:33 PM

[Aug 12, 2009 3:34:53 PM] [upgrade utility] [EMW] [Array Discovery]
Discovery of the device for address /200.10.10.207 started

[Aug 12, 2009 3:34:53 PM] [upgrade utility] [EMW] [Array Discovery]
Started to contact symbol server for IP address /200.10.10.207

[Aug 12, 2009 3:34:53 PM] [upgrade utility] [EMW] [Array Discovery]
Discovery of the device for address /200.10.10.206 started

[Aug 12, 2009 3:34:53 PM] [upgrade utility] [EMW] [Array Discovery]
Started to contact symbol server for IP address /200.10.10.206

[Aug 12, 2009 3:34:53 PM] [upgrade utility] [EMW] [Array Discovery]
Successfully contacted the symbol server for IP address /200.10.10.207

[Aug 12, 2009 3:34:53 PM] [upgrade utility] [EMW] [Array Discovery]
Successfully contacted the symbol server for IP address /200.10.10.206

[Aug 12, 2009 3:34:54 PM] [upgrade utility] [EMW] [Array Discovery]
Symbol client successfully bound to controller and retrieved SAData for network address /200.10.10.206

[Aug 12, 2009 3:34:54 PM] [upgrade utility] [EMW] [Array Discovery]
Symbol client successfully bound to controller and retrieved SAData for network address /200.10.10.207

[Aug 12, 2009 3:35:01 PM] [upgrade utility] [EMW] [Array Discovery]
Successfully started the facade for the device at network address 200.10.10.206/200.10.10.206

[Aug 12, 2009 3:35:01 PM] [upgrade utility] [EMW] [Array Discovery]
Discovery of the device for address 200.10.10.206/200.10.10.206 ended

[Aug 12, 2009 3:35:02 PM] [upgrade utility] [EMW] [Array Discovery]
Successfully started the facade for the device at network address 200.10.10.207/200.10.10.207

[Aug 12, 2009 3:35:02 PM] [upgrade utility] [EMW] [Array Discovery]
Discovery of the device for address 200.10.10.207/200.10.10.207 ended

[Aug 12, 2009 3:35:09 PM] [FC-SATA6540] [pre-upgrade tests] [pre-upgrade tests start]
Pre-upgrade tests started

[Aug 12, 2009 3:35:11 PM] [FC-SATA6540] [pre-upgrade tests] [check controller type]
Test passed - controller A

[Aug 12, 2009 3:35:11 PM] [FC-SATA6540] [pre-upgrade tests] [check controller type]
Test passed - controller B

[Aug 12, 2009 3:35:11 PM] [FC-SATA6540] [pre-upgrade tests] [check firmware version]
Test passed

[Aug 12, 2009 3:35:11 PM] [FC-SATA6540] [pre-upgrade tests] [check controller state]
Test passed - controller A

[Aug 12, 2009 3:35:13 PM] [FC-SATA6540] [pre-upgrade tests] [check spm database]
Test passed - controller A

[Aug 12, 2009 3:35:13 PM] [FC-SATA6540] [pre-upgrade tests] [check controller state]
Test passed - controller B

[Aug 12, 2009 3:35:15 PM] [FC-SATA6540] [pre-upgrade tests] [check spm database]
Test passed - controller B

[Aug 12, 2009 3:35:15 PM] [FC-SATA6540] [pre-upgrade tests] [check drives]
Test passed

[Aug 12, 2009 3:35:15 PM] [FC-SATA6540] [pre-upgrade tests] [check volume groups]
Test passed

[Aug 12, 2009 3:35:15 PM] [FC-SATA6540] [pre-upgrade tests] [check hot spares]
Test passed

[Aug 12, 2009 3:35:15 PM] [FC-SATA6540] [pre-upgrade tests] [check current operations]
Exclusive operation: One or more exclusive operations are in progress. The operations must complete before the firmware can be upgraded. Use the storage manager software to monitor the progress of the operation(s).

[Aug 12, 2009 3:35:15 PM] [FC-SATA6540] [pre-upgrade tests] [check volumes]
Test passed

[Aug 12, 2009 3:35:15 PM] [FC-SATA6540] [pre-upgrade tests] [check dac store]
Test passed

[Aug 12, 2009 3:35:17 PM] [FC-SATA6540] [pre-upgrade tests] [check internal data validity]
Test passed

[Aug 12, 2009 3:35:37 PM] [FC-SATA6540] [pre-upgrade tests] [check event log]
The event log has not been cleared within the last 24 hours.

[Aug 12, 2009 3:35:42 PM] [FC-SATA6540] [pre-upgrade tests] [check event log]
Event log verification error: You cannot upgrade the storage array until the problem is resolved. Contact your technical support representative to resolve this issue.

Event log issues:
Too many critical events logged
Too many destination driver events

[Aug 12, 2009 3:35:42 PM] [FC-SATA6540] [pre-upgrade tests] [pre-upgrade tests complete] [0h 0m 32s]
Pre-upgrade test(s) failure - the storage array cannot be upgraded in its present state

[Aug 12, 2009 3:53:01 PM] [FC-SATA6540] [pre-upgrade tests] [pre-upgrade tests start]
Pre-upgrade tests started

[Aug 12, 2009 3:53:01 PM] [FC-SATA6540] [pre-upgrade tests] [check controller type]
Test passed - controller A

[Aug 12, 2009 3:53:01 PM] [FC-SATA6540] [pre-upgrade tests] [check controller type]
Test passed - controller B

[Aug 12, 2009 3:53:01 PM] [FC-SATA6540] [pre-upgrade tests] [check firmware version]
Test passed

[Aug 12, 2009 3:53:01 PM] [FC-SATA6540] [pre-upgrade tests] [check controller state]
Test passed - controller A

[Aug 12, 2009 3:53:03 PM] [FC-SATA6540] [pre-upgrade tests] [check spm database]
Test passed - controller A

[Aug 12, 2009 3:53:03 PM] [FC-SATA6540] [pre-upgrade tests] [check controller state]
Test passed - controller B

[Aug 12, 2009 3:53:04 PM] [FC-SATA6540] [pre-upgrade tests] [check spm database]
Test passed - controller B

[Aug 12, 2009 3:53:04 PM] [FC-SATA6540] [pre-upgrade tests] [check drives]
Test passed

[Aug 12, 2009 3:53:04 PM] [FC-SATA6540] [pre-upgrade tests] [check volume groups]
Test passed

[Aug 12, 2009 3:53:04 PM] [FC-SATA6540] [pre-upgrade tests] [check hot spares]
Test passed

[Aug 12, 2009 3:53:04 PM] [FC-SATA6540] [pre-upgrade tests] [check current operations]
Exclusive operation: One or more exclusive operations are in progress. The operations must complete before the firmware can be upgraded. Use the storage manager software to monitor the progress of the operation(s).

[Aug 12, 2009 3:53:04 PM] [FC-SATA6540] [pre-upgrade tests] [check volumes]
Test passed

[Aug 12, 2009 3:53:05 PM] [FC-SATA6540] [pre-upgrade tests] [check dac store]
Test passed

[Aug 12, 2009 3:53:07 PM] [FC-SATA6540] [pre-upgrade tests] [check internal data validity]
Test passed

[Aug 12, 2009 3:53:32 PM] [FC-SATA6540] [pre-upgrade tests] [check event log]
The event log has not been cleared within the last 24 hours.

[Aug 12, 2009 3:53:37 PM] [FC-SATA6540] [pre-upgrade tests] [check event log]
Event log verification error: You cannot upgrade the storage array until the problem is resolved. Contact your technical support representative to resolve this issue.

Event log issues:
Too many critical events logged
Too many destination driver events

[Aug 12, 2009 3:53:37 PM] [FC-SATA6540] [pre-upgrade tests] [pre-upgrade tests complete] [0h 0m 35s]
Pre-upgrade test(s) failure - the storage array cannot be upgraded in its present state

easybegin

停止I/O，确认cache中没有活动的东西！然后再升级。

glfeng

回楼上，并补充：
没有IO，是在主机没有开机的情况下做的升级，
是不是需要更高版本的CAM？

easybegin

Exclusive operation: One or more exclusive operations are in progress. The operations must complete before the firmware can be upgraded. Use the storage manager software to monitor the progress of the operation(s).

还是再检查一下吧，提示用软件监控进程：“Use the storage manager software to monitor the progress of the operation（s）。”

fireware

你用的ＣＡＭ的版本是正确的吗，在升级之前会有一些对比与检查．都正确吗？
从日志上看，是在检查完后，有问题不能升级，能贴出，现在的event log? 看是什么摄氏．

xiazhen9842

我想LZ,你能不能清一下你的控制器的LOG。清除之前，先另存一下。然后再进行升级。还有你不能用太高的CAM。它可能会直接给你升级到7的版本。那样你就完了。因为7的版本和6版有很大的差异的。升级到7之后以前的卷信息可能会变。还有升级之前最好全备一下数据。

glfeng

回6楼，
控制器的log怎么清除？在CAM里面? 还是接串口进去用命令，请明示，谢谢.

Guptill

原帖由 xiazhen9842 于 2009-8-13 17:32 发表
我想LZ,你能不能清一下你的控制器的LOG。清除之前，先另存一下。然后再进行升级。还有你不能用太高的CAM。它可能会直接给你升级到7的版本。那样你就完了。因为7的版本和6版有很大的差异的。升级到7之后以前的卷 ...

就是你想直接升级到7，那么CAM也不会帮你做的。6.xx只能升级到6.60，如果需要到7.x，那么需要使用专门的升级工具，呵呵。