250在OK下boot任何设备都卡住

喊佛

早上拆开玩了玩。重新装上，boot cdrom或者直接boot disk都卡住了。。。求助

ok setenv diag-switch? true
diag-switch? =        true
ok set diag-level max
Fast Data Access MMU Miss
ok reset-all
Resetting ...


Software Power ON

CPU0 has assumed the role of Boot CPU

@(#) Sun (TM) Enterprise 250  3.30 Version 0 created 2003/11/11 10:37
Online:  CPU0  Ultra-II (v10.0) 4:1 2048KB 2-2 ECache MCap 7
Offline: CPU1 (MD'ed)
Setting system ECache size to 2048KB
Clearing DTAGS...Done
Programming memory controller for 10ns/100MHz UPA timing
Clearing E-Cache Tags...Done
Clearing I/D TLBs...Done
Probing Memory...Done
HiMem base = 0000.0000.6000.0000   size = 0000.0000.2000.0000
Clearing Memory...Done
MMUs ON
Copying ROM to RAM...Done
RAM CRC = 0000.0000.e5e9.49a2;  ROM CRC = 0000.0000.e5e9.49a2
Decompressing into Memory...0000.0000.0004.5304 (277KB)...Done
Size = 0000.0000.0008.5cc0 (536KB)
Starting Forth kernel at 0000.0000.f005.9e1c
ttya initialized
SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
System Memory Configuration:
  Bank #0   0   0   0   0 :   0 MB   [Not In Use]
  Bank #1   0   0   0   0 :   0 MB   [Not In Use]
  Bank #2 128 128 128 128 : 512 MB   [Available  512MB @ 40000000 ]
  Bank #3 128 128 128 128 : 512 MB   [Available  512MB @ 60000000 ]
Environmental monitor: enabled
Probing Floppy: No drives detected
Initializing RSC...Done.
Primary UPA probing
Probing all UPA slots ................................Done.
At UPA Slot  0 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 1f Created Node(s)...pci pci

Primary I/O probing
Probing /pci@1f,4000 at Device 1  network
Probing /pci@1f,4000 at Device 3  scsi disk tape scsi disk tape
Probing /pci@1f,4000 at Device 2  scsi disk tape scsi disk tape
Probing /pci@1f,4000 at Device 4  Nothing there
Probing /pci@1f,4000 at Device 5  TSI,gfxp
Probing /pci@1f,2000 at Device 0  This slot excluded from probing...
Probing /pci@1f,2000 at Device 1  pci
Probing /pci@1f,2000/pci@1 at Device 0  pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 1  pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 2  pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 3  pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 4  Nothing there
Probing /pci@1f,2000/pci@1 at Device 5  Nothing there
Probing /pci@1f,2000/pci@1 at Device 6  Nothing there
Probing /pci@1f,2000/pci@1 at Device 7  Nothing there
Probing /pci@1f,2000/pci@1 at Device 8  Nothing there
Probing /pci@1f,2000/pci@1 at Device 9  Nothing there
Probing /pci@1f,2000/pci@1 at Device a  Nothing there
Probing /pci@1f,2000/pci@1 at Device b  Nothing there
Probing /pci@1f,2000/pci@1 at Device c  Nothing there
Probing /pci@1f,2000/pci@1 at Device d  Nothing there
Probing /pci@1f,2000/pci@1 at Device e  Nothing there
Probing /pci@1f,2000/pci@1 at Device f  Nothing there

Probing /pci@1f,2000 at Device 2  Nothing there
Probing /pci@1f,2000 at Device 3  Nothing there
Probing /pci@1f,2000 at Device 4  Nothing there
Probing /pci@1f,2000 at Device 5  Nothing there
Can't open input device.
Keyboard not present.  Using ttya for input and output.
SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
System Memory Configuration:
  Bank #0   0   0   0   0 :   0 MB   [Not In Use]
  Bank #1   0   0   0   0 :   0 MB   [Not In Use]
  Bank #2 128 128 128 128 : 512 MB   [Available  512MB @ 40000000 ]
  Bank #3 128 128 128 128 : 512 MB   [Available  512MB @ 60000000 ]
Environmental monitor: enabled
Probing Floppy: No drives detected
Initializing RSC...Done.
Primary UPA probing
Probing all UPA slots ................................Done.
At UPA Slot  0 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 1f Created Node(s)...pci pci

Primary I/O probing
Probing /pci@1f,4000 at Device 1  network
Probing /pci@1f,4000 at Device 3  scsi disk tape scsi disk tape
Probing /pci@1f,4000 at Device 2  scsi disk tape scsi disk tape
Probing /pci@1f,4000 at Device 4  Nothing there
Probing /pci@1f,4000 at Device 5  TSI,gfxp
Probing /pci@1f,2000 at Device 0  This slot excluded from probing...
Probing /pci@1f,2000 at Device 1  pci
Probing /pci@1f,2000/pci@1 at Device 0  pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 1  pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 2  pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 3  pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 4  Nothing there
Probing /pci@1f,2000/pci@1 at Device 5  Nothing there
Probing /pci@1f,2000/pci@1 at Device 6  Nothing there
Probing /pci@1f,2000/pci@1 at Device 7  Nothing there
Probing /pci@1f,2000/pci@1 at Device 8  Nothing there
Probing /pci@1f,2000/pci@1 at Device 9  Nothing there
Probing /pci@1f,2000/pci@1 at Device a  Nothing there
Probing /pci@1f,2000/pci@1 at Device b  Nothing there
Probing /pci@1f,2000/pci@1 at Device c  Nothing there
Probing /pci@1f,2000/pci@1 at Device d  Nothing there
Probing /pci@1f,2000/pci@1 at Device e  Nothing there
Probing /pci@1f,2000/pci@1 at Device f  Nothing there

Probing /pci@1f,2000 at Device 2  Nothing there
Probing /pci@1f,2000 at Device 3  Nothing there
Probing /pci@1f,2000 at Device 4  Nothing there
Probing /pci@1f,2000 at Device 5  Nothing there

Sun (TM) Enterprise 250 (UltraSPARC-II 400MHz), No Keyboard
OpenBoot 3.30, 1024 MB memory installed, Serial #11669291.
Ethernet address 8:0:20:b2:f:2b, Host ID: 80b20f2b.



Initializing    1 megs of memory at addr          7fe00000              
Initializing 1022 megs of memory at addr          40000000              
ok show-post-results
Power On Selftest not run on last reset
Persistent/saved POST results are:
Status 0=Pass, Non-Zero=Fail (%o0): 0
Message String               (%o1):
Board Descriptor             (%o2): ffdfffff0bd11111
ok
ok
ok
ok boot cdrom
Boot device: /pci@1f,4000/scsi@3/disk@6,0:f  File and args:

然后就卡在这了。。。

yoyosys

查看一下，disk、CDROM别名对应是否正确，和硬件相对应

xiazhen9842

我认为可能是SCSI线接触有问题吧。HANG住了。要不检查一下你的主板和光驱还有硬盘的连线吧。

喊佛

设备名是没问题的。。SCSI嫌疑大？

sunshiene

有替换件就好了，一个一个派出

山野村夫

这个真不好说了，怀疑是线缆的问题

喊佛

很奇怪。。。。内存重新插拔了一下又好了。。。

山野村夫

汗，没看到内存检测的错误呀

zhmzhouming

学习

sunshiene

老机器还真是成精了