NBU6.0问题,有经验者进

manyia

windows环境,带库是STK1400,带库备份时报800错误，此错误显示没有带机可用，但NBU做初始化后这台机器可以看到12个带机，而带机路径显示不可用

请问有人碰到过吗? 应该是什么问题? 谢谢

wolfheader

删了重配？

STK1400，windows master 有点浪费啊

manyia

原帖由 wolfheader 于 2009-8-24 15:51 发表
删了重配？

STK1400，windows master 有点浪费啊

至于环境,就是这样了,呵呵

从建存储单元后,还是有问题

wolfheader

原帖由 manyia 于 2009-8-24 16:26 发表

至于环境,就是这样了,呵呵

从建存储单元后,还是有问题

等高手，好多原因
你可以先scan一下，看看能正确列出所有的drive吗？

无牙

典型的driver的实际index顺序和NBU中配置不符。你可以用robtest验证这一点。

jgtvisionnex

是不是需要完全删除后重新配置就好了？

manyia

谢谢大家,我在看一下

onion

aix 下遇到过报800的问题，在device monitor 下怎么都up不起来，后来好像所有driver 都 /usr/openv/volmgr/bin/tpconfig -update -drive 11 -drstatus UP 就可以了,windos不知是不是一样？
当时网上找的
Resolution:
The following are some known causes of a Status 800 and how to correct them.

If the drives are down:
Ensure all the drives in the storage unit are in an "UP" state. If a drive is "DOWN" check the Windows Event Viewer or UNIX sy
stem logs (syslog, messages) for any hardware or SCSI errors that indicate why the drive was brought down. To manually put the
drive in an "UP" state do the following:
1. Launch the NetBackup Administration Console
2. Go to the Device Monitor
3. Highlight any drives that appear as "DOWN"
4. Select Actions | Up Drive to up the drive

If the storage unit is misconfigured:
If all the drives are in an "UP" state, verify the storage unit is configured correctly. If the density of the storage unit is
wrong or if there are no drives available, a Status 800 can occur.
1. Launch the NetBackup Administration Console
2. Go to Storage Units
3. Right-click the storage unit name and select Change
4. Correct any misconfigured settings such as incorrect density or the wrong number of drives
If necessary, delete and recreate the storage unit.

Additionally, if using the "Multiple Copies" or ITC (Inline Tape Copy) feature of a policy, specifying a Storage Unit directly
instead of using "Any Available" has been known to resolve this issue.

fusmou

是不是drivers已经down了

无牙

肯定是down了。