HP C1099A 终端设置说明

computerboy268

Setup
To make changes to the terminal configuration:
􀂉 Determine Your Devices
Determine what type of devices you are connecting to the terminal. The default is a DTE host using the EIA port and a parallel printer using the PAR port.
􀂉 Enter the Configuration Setup Menu
To access the Setup menu in HPTerm emulation.
Press the F10 key to display the terminal local function labels:
Device control
margins/ tabs/col
Modes
1 1
enhancevideo
define fields
config keys
Then press F8
config keys
(For other emulations use Ctrl+Scroll Lock to get to Setup.)
This brings you into the Quick (F1) menu.
This menu displays the parameters critical to the operation of the terminal.
Navigate between parameters in a menu with the arrow keys. To toggle between choices for a parameter use Enter/shift-Enter. To save a choice for a parameter (such as Baud Rate = 19200), highlight the choice (e.g. 19200) and then use the arrow keys to jump to any other parameter. Choices are saved when exiting Setup. (See Saving Parameters below for details)
􀂉 Using Additional Setup Options
The function keys are labeled at the top of every menu.
F1 Quick
F2 Genrl
F3 Displ
F4 Kybd
F5 Keys
F6 Ports
F7 Host
F8 Print
F9 Emul
F10Tabs
F11 AnsBk
F12 Prog
Print Exec
At this point you can set up your own selections for any other parameters, such as those for the display, keyboard, function/edit keys, and tabs. Select a menu using the function keys such as F3 for Display parameters.
􀂉 Saving Parameters
To save your Setup parameters and exit the Setup menu hit Esc.
The blinking prompt “Save all? (Y/N)” will appear in the upper right corner of the menu. Then press Y. This will save the settings in non-volatile memory. Select N and the configuration changes will take effect but will be lost if the terminal is reset or powered off.
􀂉 Establishing Communication
Your installation is now complete. By pressing the Enter key, you should be able to communicate with the host computer. The printer should respond to the local print command, which is Shift+Print Scrn for HPTerm, Shift+Ctrl+Del (on the numeric keypad) for other emulations.
􀂉 Reset
Soft Reset – Shift+Print Screen/SysRq
(For emulations other than HPTerm - Shift+Scroll Lock)
This function unlocks the keyboard, turns off all the print modes and reinitializes the serial ports.
Hard Reset (Power on) – Ctrl+Shift+Scroll Lock
(For emulations other than HPTerm – Ctrl+Shift+Scroll Lock)
All terminal parameters are initialized. It also performs reset pages and default modes. Reverts to all terminal and session settings that were saved in non-volatile memory.
Reset to Defaults - Refer to above Reset to defaults note in the Installation section. 4
HPTerm Emulation
HPTerm is the default terminal emulation used by HP9000 and HP3000 console ports.
What Are Function Keys?
The eight function keys (F1 – F8) perform the actions indicated by the eight corresponding labels displayed at the bottom of the screen. They offer the convenience of local editing and configuration changes.
UPPERCASE labels perform the indicated action.
lowercase labels lead to other label sets, allowing you to cycle through all the actions available.
System Labels
The F10 key displays the local function labels.
device control
margins/ tabs/col
modes
1 1
enhancevideo
define fields
config keys
device control
Defines how to print information to a printer connected to a terminal.
margins/ tabs/col
Formats the display of information on the screen.
modes
Selects the operating modes.
enhance video
Selects one or more video enhancements.
define fields
Provides field choices for creating forms.
config keys
Calls up the menus to select the operating characteristics
Using the Terminal with a Printer
This section describes how to print a hardcopy of what is on the terminal screen.
Select the printer as the “to” device:
Press F10, then press F1
device control
Then F2
TO EXT DEV
You can then print data that is currently on the screen, using the device control function or Shift+Print Screen. You can also select device modes to use data logging.
Data Logging
Data logging causes data entered from the keyboard or received from the host computer to be sent automatically to a device (a printer, for example).
To activate data logging:
Press
device modes
then F4
LOG TOP
or F3
LOG BOTTOM
LOG TOP The top line of data in display memory is sent to the printer as it rolls off the top of memory.
LOG BOTTOM When the cursor moves to a new line, the previous line prints on the printer.
Other Commands
The following commands are accomplished differently than past HP terminals due to the PC type keyboard:
Clear display - Hit the Home key and then F12.
Clear line - Hit F11.
See User Manual for complete list of command keystroke changes.
5
REGULATORY INFORMATION
Safety
This product has not been evaluated for connection to an "IT" power system (AC distribution system having no direct connection to earth according to IEC 950).
Locate the terminal near an AC outlet! The ac power cord is this product's main ac disconnect device and must be easily accessible at all times.
Battery Notice
This product contains a Lithium battery. This battery is not to be removed or replaced by the user.
Product Stewardship
In the event this unit fails to function and needs to be replaced, it is the responsibility of the customer to dispose of the unit in a way that takes the environment into consideration. If a recycling process does not exist at the customer’s facility, the unit can be returned (at the customer’s expense) to the Hewlett-Packard Product Recycling Solutions (PRS).
The PRS organization offers environmentally sound reuse, resale and recycling services that enhance customer satisfaction by removing unwanted material from customers' work sites at a low cost and with low risk. We help our customers sell excess and obsolete products, run trade in programs, deal with excess and scrap assets and more.
Please call our Information / Customer Registration line at 1-888-485-1849 (In the U.S. only).
ELECTRONIC EMISSION NOTICES
FCC STATEMENT (USA Only)
The United States Federal Communications Commission has specified that the following notice be brought to the attention of users of this product:
NOTE
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Hewlett-Packard's system verification tests were conducted with HP-supported peripheral devices and HP shielded cables, such as those you receive with your product. Changes or modifications not expressly approved by Hewlett-Packard could void the user's authority to operate the equipment. Cables used with this device must be properly shielded to comply with the requirements of the FCC.
Canada RFI Statement
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
European Union RFI Statement
This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.
Japan RFI Statement

本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u3/102276/showart_2035438.html