what does fragementation mean in freebsd?

netrookie

                               
On Mon, Jan 24, 2005 at 06:03:04PM -0800, Mervin McDougall wrote:
> hi
>   I wanted to know whether it is unusal or is a
> problem if when my system starts it indicates that
> there is some fragmentation of the files but the file
> system is clean and thus it is skipping the fsck. Is
> this a bad thing? Is this unusual?
Ah hah!  I think this is simply a misunderstanding of what is meant
by fragmentation - because we use it in many different ways.
One way we use the term "fragment" is a "subatomic" unit of storage.
To try to keep the internal bookkeeping reasonable, FFS and many
other filesystems don't allocate storage in units of sectors - they
use a larger aggregating factor.  The larger the factor, the lower
the storage and computational overhead in maintaining the filesystem.
The problem with this approach is that it can be wasteful.  If you
have 8k or 16k allocation units, then even small files would have
to use that amount of storage - if you have hundreds or thousands
of small files, you can end up wasting a lot of space.  The same
thing happens with larger files.  If you have a file of 128k plus
one byte, that last byte would end up all by itself in an allocation
unit  You can consider these allocation units the atomic storage
size.  Some filesystems, such as the filesystem used by BSD (UFS1
or UFS2), also support "subatomic" parts for these left-overs and
small files.  We happen to call those units "fragments."  When the
system boots and reports the number of fragments - that is what it
is talking about.  It is nothing to be concerned about: there's
nothing wrong, and running fsck wouldn't "fix" it.  According to
the manual page for newfs, the default block size (allocation unit
or atomic storage unit) is 16k and the default fragment size is 2k.
Another way we use the term fragmentation is when data which are
logically contiguous end up being discontiguous on the disk.  When
you have a lot of file creation, modification, and deletion going
on, this happens.  Let's say that you have a file which consists
of 3 allocation units.  When you start with a fresh filesystem,
that file would be created on three consecutive allocation units
on the disk.  Other files are then created, which may use the
allocation units immediately following the three given to the first
file.  If the first file now grows, the next block, which will be
logically sequential, will be physically separated on the disk.
As some of the in-between files are modified or deleted, there may
even be free blocks between the first three allocation units and
the new one.  This is also called fragmentation, and is another
thing that may not be "wrong" with your filesystem (though it can
impact very high-performance applications due to increased seek
activity on the disk, and breaking up sequential read or prefetch
sequences on intelligent storage subsystems), and nothing that fsck
would fix, either.  Now, on top of that, the UFS family of filesystems
were built to intentionally do a certain type of "fragmentation"
to deal with slower disk drive electronics and controllers.  This
is sometimes called interleave and causes the system to intentionally
skip over blocks between what are logically contiguous blocks to
allow the CPU and drive electronics some "breathing room" before
having to be ready (or have asked for) the next block.  Imagine a
spinning disk.  The data are passing beneath the head: block 1,
block 2, block 3, etc.  Some program in your system reads a block
from a file, and lets say it is block 2.  The disk and controller
electronics watch the sectors going by, sort of like watching for
your baggage at the airport - when the right one comes along, they
read it.  Before your program can ask for the next block, the disk
has already rotated so that are are in the midst of that block
somewhere.  The controller has to wait for the disk to come all
the way around again before it can be read.  By allocating the next
logical block of data from the file to be in block 4 instead of
block 3, we may be able to avoid having to wait for that disk to
spin all the way around again.
A lot of work has gone into designing the UFS filesystems to avoid
unwanted fragmentation, and to support extent-based growth for
large files.  That's probably the reason that there is no standard
"defrag" utility like there is for most Windows filesystems.
You may be thinking of "fragmented" as in broken, or fractured.
That is not what is meant here.  It doesn't mean that anything is
wrong with your filesystem, just some statistics on how much those
"sub atomic" allocation units are being used.  Your filesystem is
clean, is using some fragments, and may or may not be fragmented
(data scattered in logically discontigous ways).
               
               
               
               
               
               
               

本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u3/91935/showart_2041201.html