有关smstools3和GSM modem

cchtd

各位大大，请问有谁用过smstools，哪种GSM modem兼容性比较好

macafee

The following list is incomplete and old. It shows devices that are reported as well working:

Falcom A1 (mode=old, baudrate=9600)
Falcom A2 (baudrate=9600)
Falcom A2-D (baudrate=9600)
Falcom Twist Serial
Falcom Twist MC35 (init string AT+CNMI=2,0,0,2,1)
Falcom Tango
Falcom Samba (init=AT^SSMSS=1)
Falcom Samba 75 (status report works with init = AT+CPMS="MT","MT","MT")
Nokia 30 (status report not tested)
Nokia 22 (baudrate=115200)
Motorola G18 (with init string ATE0)
Multitech Modem MTCBA-G-F2
Multitech Modem MTCBA-G-F4 (unless set to unsolicited mode)
Siemens M10 (baudrate=9600)
Siemens M20 (baudrate=19200 Status report works fine with some firmware versions.)
Siemens TC35 (init string AT+CNMI=2,0,0,2,1 Some firmware versions are bad)
Siemens MC35i (init string AT+CPMS="SM")
Wavecom M1206
Wavecom 1206 b
Wavecom M1306B

Vodafone Mobile Connect Card GPRS (from Option) (see Note 3)
Vodafone Mobile Connect Card 3G/GPRS (from Option) (see Note 3)
Vodafone Mobile Connect Card 3G/W-LAN/GPRS (from Option) (see Note 3)

Nokia 6210e
Nokia 6310
Nokia 7110 (only with original RS232 cable)
Ericsson GM22 (see Note 1)
Ericsson R320s (see Note 2)
Ericsson R320 (init string AT+CPMS="SM")
Ericsson T39m (init string AT+CPMS="ME","ME","ME")
Sony-Ericsson T300 (init string AT+CPMS="ME",baudrate=115200)
Sony Ericsson T60
Sony Ericsson T68
Sony Ericsson T65 (do not use kudzu on the serial port)
Siemens S25
Siemens C35 (baudrate=19200)
Siemens S35i
Siemens M45 (initialize with AT+CPMS="SM")
Siemens M50
Sharp GX-10 (only infrared tested)
Siemens MC60, M55 (see Note 4)
SIMCOM SIM600 (see Note 6)

cchtd

这个表应该是比较老的，多谢回复