- 论坛徽章:
- 0
|
- Cleaning /etc/ptmp...
- (c)Copyright 1983-2000 Hewlett-Packard Co., All Rights Reserved.
- (c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California
- (c)Copyright 1980, 1984, 1986 Novell, Inc.
- (c)Copyright 1986-1992 Sun Microsystems, Inc.
- (c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology
- (c)Copyright 1989-1993 The Open Software Foundation, Inc.
- (c)Copyright 1986 Digital Equipment Corp.
- (c)Copyright 1990 Motorola, Inc.
- (c)Copyright 1990, 1991, 1992 Cornell University
- (c)Copyright 1989-1991 The University of Maryland
- (c)Copyright 1988 Carnegie Mellon University
- (c)Copyright 1991-2000 Mentat Inc.
- (c)Copyright 1996 Morning Star Technologies, Inc.
- (c)Copyright 1996 Progressive Systems, Inc.
- (c)Copyright 1991-2000 Isogon Corporation, All Rights Reserved.
- RESTRICTED RIGHTS LEGEND
- Use, duplication, or disclosure by the U.S. Government is subject to
- restrictions as set forth in sub-paragraph (c)(1)(ii) of the Rights in
- Technical Data and Computer Software clause in DFARS 252.227-7013.
- Hewlett-Packard Company
- 3000 Hanover Street
- Palo Alto, CA 94304 U.S.A.
- Rights for non-DOD U.S. Government Departments and Agencies are as set
- forth in FAR 52.227-19(c)(1,2).
- /sbin/rc[67]: syntax error at line 2 : `(' unexpected
- /sbin/rc1.d/S080crashconf[18]: /usr/bin/echo: not found
- /sbin/rc1.d/S080crashconf[19]: /usr/sbin/mount: not found
- /sbin/rc1.d/S080crashconf[19]: /usr/bin/echo: not found
- /sbin/rc1.d/S093vxvm-reconfig[47]: /etc/vx/lib/vxcommon: not found
- /sbin/rc2.d/S590Rpcd[30]: syntax error at line 2 : `(' unexpected
- /sbin/rc2.d/S600iforls[34]: syntax error at line 2 : `(' unexpected
- /sbin/rc2.d/S605Dmisp[30]: syntax error at line 2 : `(' unexpected
- /sbin/rc2.d/S620xfs[10]: env: not found
- /sbin/rc2.d/S620xfs[10]: grep: not found
- /sbin/rc2.d/S648eus[43]: syntax error at line 2 : `(' unexpected
- /sbin/rc2.d/S700acct[39]: syntax error at line 2 : `(' unexpected
- interpreter "/bin/sh" not found
- file link resolves to "/usr/bin/sh"
- /sbin/rc[14]: /sbin/rc2.d/S890ServCtlMgr: not found
- interpreter "/bin/sh" not found
- file link resolves to "/usr/bin/sh"
- /sbin/rc[14]: /sbin/rc2.d/S996vradmind: not found
- interpreter "/bin/sh" not found
- file link resolves to "/usr/bin/sh"
- /sbin/rc[14]: /sbin/rc2.d/S996vxrsyncd: not found
- /sbin/rc3.d/S200tps.rc[15]: /usr/bin/hostname: not found
- /sbin/rc3.d/S823hpws_apache[45]: syntax error at line 2 : `(' unexpected
- /sbin/rc3.d/S823hpws_tomcat[46]: syntax error at line 2 : `(' unexpected
- /sbin/rc3.d/S823hpws_webmin[45]: syntax error at line 2 : `(' unexpected
- /sbin/rc3.d/S823hpws_xmltools[42]: syntax error at line 2 : `(' unexpected
- interpreter "/bin/sh" not found
- file link resolves to "/usr/bin/sh"
- /sbin/rc[14]: /sbin/rc3.d/S960init.cssd: not found
- HP-UX Start-up in progress
- __________________________
- Configure system crash dumps ........................................ OK
- Mount file systems .................................................. OK
- VxVM device node check .............................................. OK
- VxVM general startup ................................................ OK
- .................................................................... OK
- Mount file systems .................................................. OK
- Update kernel and loadable modules .................................. N/A
- Initialize loadable modules ......................................... N/A
- Setting hostname .................................................... OK
- Start Kernel Logging facility ....................................... N/A
- Set privilege group ................................................. N/A
- Display date ........................................................ N/A
- Copy processor logs to /var/tombstones .............................. OK
- Save system crash dump if needed .................................... N/A
- Start evp ........................................................... OK
- Enable auxiliary swap space ......................................... OK
- Start syncer daemon ................................................. OK
- Configure Loopback interfaces (lo0) ................................. OK
- VxVM volume recovery start .......................................... OK
- Configuring all unconfigured software filesets ...................... OK
- Recover editor crash files .......................................... OK
- Clean UUCP .......................................................... OK
- List and/or clear temporary files ................................... OK
- Clean up old log files .............................................. OK
- Start system message logging daemon ................................. OK
- Start pty allocator daemon .......................................... OK
- Configuring OLA/R interface ......................................... N/A
- Start network tracing and logging daemon ............................ OK
- Configure HP igelan Gigabit Ethernet interfaces ..................... OK
- Configure HP iether 100BT/Gigabit Ethernet interfaces ............... OK
- Configure HP Gigabit Ethernet interfaces ............................ OK
- Configure HP Ethernet interfaces .................................... OK
- Configure HP HP-PB 100BT interfaces ................................. OK
- Create PCI FDDI device files. ....................................... OK
- Configure HP 100BASE-T interfaces ................................... OK
- Configure VLAN interfaces ........................................... OK
- Configure LAN interfaces ............................................ OK
- Start name server daemon ............................................ OK
- Starting Netscape Directory Server .................................. OK
- Starting Netscape Administration Server ............................. OK
- Start NFS core subsystem ............................................ OK
- Start NIS+ server subsystem ......................................... OK
- Start NIS+ client subsystem ......................................... OK
- Start NIS server subsystem .......................................... OK
- Start NIS client subsystem .......................................... OK
- Start NFS client subsystem ..........................................
- GenericSysName [HP Release B.11.11] (see /etc/issue)
- Console Login:
- INIT: Command is respawning too rapidly.
- Will try again in 5 minutes.
- Check for possible errors.
- id: h1 "/sbin/init.d/init.cssd run >/dev/null 2>&1 </dev/null"
- INIT: Command is respawning too rapidly.
- Will try again in 5 minutes.
- Check for possible errors.
- id:samd "/usr/sam/lbin/samd # system mgmt daemon"
- GenericSysName [HP Release B.11.11] (see /etc/issue)
- Console Login: root
- Password:
- Please wait...checking for disk quotas
- (c)Copyright 1983-2000 Hewlett-Packard Co., All Rights Reserved.
- (c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California
- (c)Copyright 1980, 1984, 1986 Novell, Inc.
- (c)Copyright 1986-1992 Sun Microsystems, Inc.
- (c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology
- (c)Copyright 1989-1993 The Open Software Foundation, Inc.
- (c)Copyright 1986 Digital Equipment Corp.
- (c)Copyright 1990 Motorola, Inc.
- (c)Copyright 1990, 1991, 1992 Cornell University
- (c)Copyright 1989-1991 The University of Maryland
- (c)Copyright 1988 Carnegie Mellon University
- (c)Copyright 1991-2000 Mentat Inc.
- (c)Copyright 1996 Morning Star Technologies, Inc.
- (c)Copyright 1996 Progressive Systems, Inc.
- (c)Copyright 1991-2000 Isogon Corporation, All Rights Reserved.
- RESTRICTED RIGHTS LEGEND
- Use, duplication, or disclosure by the U.S. Government is subject to
- restrictions as set forth in sub-paragraph (c)(1)(ii) of the Rights in
- Technical Data and Computer Software clause in DFARS 252.227-7013.
- Hewlett-Packard Company
- 3000 Hanover Street
- Palo Alto, CA 94304 U.S.A.
- Rights for non-DOD U.S. Government Departments and Agencies are as set
- forth in FAR 52.227-19(c)(1,2).
- You have mail.
-
- Value of TERM has been set to "vt100".
- WARNING: YOU ARE SUPERUSER !!
- # bash
- bash-2.04# who -r
- . run-level 3 Nov 30 17:33 3 0 S
- bash-2.04# pwd
- /
- bash-2.04# ifconfig lan0
- ifconfig: no such interface
- bash-2.04# nets
- netscape netstat
- bash-2.04# netstat -rn
- Routing tables
- Destination Gateway Flags Refs Interface Pmtu
- 127.0.0.1 127.0.0.1 UH 0 lo0 4136
- 127.0.0.0 127.0.0.1 U 0 lo0 0
- bash-2.04# pwdd
- bash: pwdd: command not found
- bash-2.04# pwd
- /
- bash-2.04# cd /etc/
- bash-2.04# more rc.log
- Old /etc/rc.log moved to /etc/rc.log.old
- **************************************************
- HP-UX Start-up in progress
- Mon Nov 30 04:34:01 EST 2009
- **************************************************
- Configure system crash dumps
- Output from "/sbin/rc1.d/S080crashconf start":
- ----------------------------
- /sbin/rc1.d/S080crashconf[18]: /usr/bin/echo: not found
- /sbin/rc1.d/S080crashconf[19]: /usr/sbin/mount: not found
- /sbin/rc1.d/S080crashconf[19]: /usr/bin/echo: not found
- EXIT CODE: 0
- Mount file systems
- Output from "/sbin/rc1.d/S081localmount start":
- ----------------------------
- checking quotas
- VxVM device node check
- Output from "/sbin/rc1.d/S091vxvm-nodes-check start":
- ----------------------------
- VxVM general startup
- Output from "/sbin/rc1.d/S092vxvm-startup start":
- ----------------------------
- Output from "/sbin/rc1.d/S093vxvm-reconfig start":
- ----------------------------
- Mount file systems
- Output from "/sbin/rc1.d/S100localmount start":
- ----------------------------
- checking quotas
- Update kernel and loadable modules
- Output from "/sbin/rc1.d/S110kmbuild start":
- ----------------------------
- "/sbin/rc1.d/S110kmbuild start" SKIPPED
- Initialize loadable modules
- Output from "/sbin/rc1.d/S112kminit start":
- ----------------------------
- /sbin/rc1.d/S112kminit[206]: Syntax error at line 2 : `(' is not expected.
- "/sbin/rc1.d/S112kminit start" SKIPPED
- Setting hostname
- Output from "/sbin/rc1.d/S320hostname start":
- ----------------------------
- /sbin/rc1.d/S320hostname[36]: Syntax error at line 2 : `(' is not expected.
- Start Kernel Logging facility
- Output from "/sbin/rc1.d/S350kl start":
- ----------------------------
- "/sbin/rc1.d/S350kl start" SKIPPED
- Set privilege group
- Output from "/sbin/rc1.d/S400set_prvgrp start":
- ----------------------------
- "/sbin/rc1.d/S400set_prvgrp start" SKIPPED
- Display date
- Output from "/sbin/rc1.d/S420set_date start":
- ----------------------------
- "/sbin/rc1.d/S420set_date start" SKIPPED
- Copy processor logs to /var/tombstones
- Output from "/sbin/rc1.d/S430pdcinfo start":
- ----------------------------
- Save system crash dump if needed
- Output from "/sbin/rc1.d/S440savecrash start":
- ----------------------------
- savecrash directory not set; defaulting to: /var/adm/crash
- EXIT CODE: 2 - savecrash found no core dump to save
- "/sbin/rc1.d/S440savecrash start" SKIPPED
- Start evp
- Output from "/sbin/rc1.d/S450evp.init start":
- ----------------------------
- Enable auxiliary swap space
- Output from "/sbin/rc1.d/S500swap_start start":
- ----------------------------
- Enabling device paging on /dev/vg00/lvol10.
- swap device(s) active
- Start syncer daemon
- Output from "/sbin/rc1.d/S520syncer start":
- ----------------------------
- syncer started
- Configure Loopback interfaces (lo0)
- Output from "/sbin/rc2.d/S008net.init start":
- ----------------------------
- VxVM volume recovery start
- Output from "/sbin/rc2.d/S096vxvm-recover start":
- ----------------------------
- Configuring all unconfigured software filesets
- Output from "/sbin/rc2.d/S120swconfig start":
- ----------------------------
- * Turning off all network based resolving services in
- '/etc/nsswitch.conf'
- * Setting up temporary hostname in '/etc/hosts'
- * Restoring '/etc/hosts' to its original contents.
- * Restoring '/etc/nsswitch.conf' to its original contents
- Recover editor crash files
- Output from "/sbin/rc2.d/S200clean_ex start":
复制代码 |
|