- 论坛徽章:
- 0
|
用boot -v启动后，停在了“pfb#0: 1152x900, rev 5159.0”，一直没反应，难道是CPU坏了？
下面是详细输出
pcisch2 at root: SAFARI 0x1c 0x600000
pcisch2 is /pci@1c,600000
/pci@1c,600000/scsi@2 (glm0):
glm0 supports power management.
/pci@1c,600000/scsi@2 (glm0):
Rev. 0 Symbios 53c1010-33/66 found.
PCI-device: scsi@2, glm0
glm0 is /pci@1c,600000/scsi@2
sd0 at glm0: target 0 lun 0
sd0 is /pci@1c,600000/scsi@2/sd@0,0
root on /pci@1c,600000/scsi@2/disk@0,0:a fstype ufs
pcisch1 at root: SAFARI 0x1e 0x600000
pcisch1 is /pci@1e,600000
PCI-device: isa@7, ebus0
ebus0 is /pci@1e,600000/isa@7
mc-us3i0 at root: SAFARI 0x0 0x0 ...
mc-us3i0 is /memory-controller@0,0
mc-us3i1 at root: SAFARI 0x1 0x0 ...
mc-us3i1 is /memory-controller@1,0
power0 at ebus0: offset 0,800
power0 is /pci@1e,600000/isa@7/power@0,800
rmc_comm0 at ebus0: offset 0,3e8
PCI-device: pmu@6, pmubus0
PCI-device: gpio@80000000, pmugpio0
pmugpio0 is /pci@1e,600000/pmu@6/gpio@80000000
pseudo-device: rmclomv0
rmclomv0 is /pseudo/rmclomv@0
Hardware watchdog enabled
pseudo-device: dld0
dld0 is /pseudo/dld@0
pcisch3 at root: SAFARI 0x1d 0x700000
pcisch3 is /pci@1d,700000
PCI-device: SUNW,XVR-100@1, pfb0
pfb0 is /pci@1d,700000/SUNW,XVR-100@1
pfb#0: 1152x900, rev 5159.0 |
|
免费注册
发表于 2009-12-20 12:15
