用命令查看cisco光模块型号及序列号

mx11

Command for CatOS Version 8.x for Cat4000 and Cat6000 Switches:
Switch (enable)show sprom {mod/port} | include Vendor SN
Command for CatOS Version other than 8.x for Cat4000 and Cat6000 Switches:
Switch (enable)show sprom {mod/port}
Command for IOS for Cat6500 Switch:
Switch#show idprom interface gigabitEthernet {mod/port} | include Vendor SN
Command for Cat4500 Switch:
Switch#show idprom interface gigabitEthernet {module/port} | include Serial No.
Command for CAT3750/3560/2970/2960/2918 Switches:
Switch#show controllers ethernet-controller gigabitEthernet {mod/port} phy | include Serial Number
EXAMPLE OF A CAT4500 SWITCH:
Switch#show idprom interface gigabitEthernet 3/29 | include Serial No.
Vendor Serial No. = ICF1020202U
================
show version
show module all 查看本设备所插板
件的参数
show diags 查看机框序列号；
板卡用show rsp chassis-info;7513
查看板卡序列号：show diagbus;
6509:show module （后面可跟参数）
也可不用。
show idprom (后跟参数)可查如风扇
、电源等序列号;有的也可用：show
hardware
=====================

本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u1/39296/showart_2129224.html