- 论坛徽章:
- 0
|
各位老大,小弟是新手,公司有台rp7400主机的系统盘不见了,原来的系统盘是2块36G的硬盘做了镜像,现在的情况如下:
ioscan -funCdisk
Class I H/W Path Driver S/W State H/W Type Description
=========================================================================
disk 0 0/0/1/0.1.0 sdisk CLAIMED DEVICE HP DVD-ROM 305
/dev/dsk/c0t1d0 /dev/rdsk/c0t1d0
disk 2 0/0/2/1.6.0 sdisk CLAIMED DEVICE SEAGATE ST336704LC
/dev/dsk/c2t6d0 /dev/rdsk/c2t6d0
disk 3 0/12/0/0.8.0.110.0.0.0 sdisk CLAIMED DEVICE HP A
/dev/dsk/c4t0d0 /dev/rdsk/c4t0d0
disk 4 1/10/0/0.8.0.108.0.0.0 sdisk CLAIMED DEVICE HP A
/dev/dsk/c6t0d0 /dev/rdsk/c6t0d0
主机上可以看到diskB的绿灯偶尔闪动,diskA灯长亮的。
由于公司同事不懂,已经把机器重启了一次了,现在做备份都不能做了
# make_recovery
NOTE: make_recovery(103): The make_recovery command will be replaced by
make_tape_recovery. Both commands are supported in this
release (Ignite-UX Revision 3.2). Please read the man page
make_tape_recovery(1M) for usage of the new command. In a
future release, make_recovery will be replaced by a script
that calls make_tape_recovery.
WARNING: Filesystem /oralog1 is not mounted. It will be ignored.
WARNING: Filesystem /oralog2 is not mounted. It will be ignored.
WARNING: Filesystem /oralog3 is not mounted. It will be ignored.
WARNING: Filesystem /oradata is not mounted. It will be ignored.
WARNING: Filesystem /oralog1 is not mounted. It will be ignored.
WARNING: Filesystem /oralog2 is not mounted. It will be ignored.
WARNING: Filesystem /oralog3 is not mounted. It will be ignored.
WARNING: Filesystem /oradata is not mounted. It will be ignored.
WARNING: Filesystem /oralog1 is not mounted. It will be ignored.
WARNING: Filesystem /oralog2 is not mounted. It will be ignored.
WARNING: Filesystem /oralog3 is not mounted. It will be ignored.
WARNING: Filesystem /oradata is not mounted. It will be ignored.
WARNING: Filesystem /oralog1 is not mounted. It will be ignored.
WARNING: Filesystem /oralog2 is not mounted. It will be ignored.
WARNING: Filesystem /oralog3 is not mounted. It will be ignored.
WARNING: Filesystem /oralog1 is not mounted. It will be ignored.
WARNING: Filesystem /oralog2 is not mounted. It will be ignored.
WARNING: Filesystem /oralog3 is not mounted. It will be ignored.
WARNING: Filesystem /oradata is not mounted. It will be ignored.
lifls(open): No such device or address
lifls: Can't list /dev/dsk/c1t6d0; file not opened
WARNING: /dev/dsk/c1t6d0 is not a lif volume.
No LIF files on the boot disk will be archived.
Check /stand/bootconf, man bootconf(4), and /dev/dsk to
make sure that the bootconf file is set up correctly.
***************************************
HP-UX System Recovery
make_recovery(390): Call to /opt/ignite/bin/save_config failed.
Check the /var/opt/ignite/logs/makrec.log1 file.
Cleanup
小弟查看了下:
# more /var/opt/ignite/logs/makrec.log1
********
Started - Mon Feb 7 12:20:31 2005
********
/opt/ignite/bin/make_recovery -A -C
/opt/ignite/lbin/list_expander -d
/opt/ignite/lbin/list_expander -d
/opt/ignite/lbin/list_expander -d
/opt/ignite/lbin/list_expander -d -v
"/opt/ignite/bin/save_config" -f "/var/opt/ignite/recovery/config.recover" "vg00
" >> "/var/opt/ignite/logs/makrec.log1" 2>&1
/opt/ignite/bin/save_config[2]: 10.34.8.0: not found.
/usr/sbin/vgcfgbackup "vg00" >> /var/opt/ignite/logs/makrec.log1 2>&1
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.con
f
/usr/sbin/vgcfgbackup "vgdb" >> /var/opt/ignite/logs/makrec.log1 2>&1
Volume Group configuration for /dev/vgdb has been saved in /etc/lvmconf/vgdb.con
f
/usr/sbin/vgexport -p -m /etc/lvmconf/vgdb.mapfile vgdb >> /var/opt/ignite/logs/
makrec.log1 2>&1
vgexport: Volume group "vgdb" is still active.
/usr/sbin/swlist -X /opt/ignite/lib/sd_opts -l product > "/var/tmp/makrec.lasttm
"/opt/ignite/bin/instl_adm" -T -f "/var/opt/ignite/recovery/config.recover" >> /
var/opt/ignite/logs/makrec.log1 2>&1
"/opt/ignite/bin/make_medialif" -a -f "/var/opt/ignite/recovery/config.recover"
-l "/var/tmp/uxinstlf.recovery" -C "HP-UX System Recovery" >> /var/opt/ignite/l
ogs/makrec.log1 2>&1
/opt/ignite/bin/instl_adm -F "/var/tmp/uxinstlf.recovery" -f "/var/tmp/tmp_cfg_f
ile" >> /var/opt/ignite/logs/makrec.log1 2>&1
/usr/bin/dd if="/var/tmp/uxinstlf.recovery" of="/dev/rmt/0mn" bs=2k >> /var/opt/
ignite/logs/makrec.log1 2>&1
30043+1 records in
30043+1 records out
Creating archive.
/usr/bin/sed 's/^.//' "/var/opt/ignite/recovery/arch.include" | /usr/bin/sort -u
|grep -v -e "^var/adm/crash" -e "^etc/xtab" -e "^etc/rmtab" >>"/var/tmp/arch
.include.1"
********
If the system is recovered using this tape,
this will be the last message seen in the
recovered log file.
********
********
********
Started - Wed Jan 6 06:19:59 2010
********
make_recovery -A -C -v
/opt/ignite/lbin/list_expander -d
/opt/ignite/lbin/list_expander -d
/opt/ignite/lbin/list_expander -d
/opt/ignite/lbin/list_expander -d -v
WARNING: Could not restore LIF volume.
"/opt/ignite/bin/save_config" -f "/var/opt/ignite/recovery/config.recover" "vg00
" >> "/var/opt/ignite/logs/makrec.log1" 2>&1
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c1t6d0":
The specified path does not correspond to physical volume attached to
this volume group
vgdisplay: Warning: couldn't query all of the physical volumes.
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c1t6d0":
The specified path does not correspond to physical volume attached to
this volume group
vgdisplay: Warning: couldn't query all of the physical volumes.
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c1t6d0":
The specified path does not correspond to physical volume attached to
this volume group
vgdisplay: Warning: couldn't query all of the physical volumes.
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c1t6d0":
The specified path does not correspond to physical volume attached to
this volume group
vgdisplay: Warning: couldn't query all of the physical volumes.
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c1t6d0":
The specified path does not correspond to physical volume attached to
this volume group
vgdisplay: Warning: couldn't query all of the physical volumes.
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c1t6d0":
The specified path does not correspond to physical volume attached to
this volume group
vgdisplay: Warning: couldn't query all of the physical volumes.
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c1t6d0":
The specified path does not correspond to physical volume attached to
this volume group
vgdisplay: Warning: couldn't query all of the physical volumes.
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c1t6d0":
The specified path does not correspond to physical volume attached to
this volume group
vgdisplay: Warning: couldn't query all of the physical volumes.
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c1t6d0":
The specified path does not correspond to physical volume attached to
this volume group
lvdisplay: Warning: couldn't query all of the physical volumes.
lvdisplay: Warning: couldn't query physical volume "/dev/dsk/c1t6d0":
The specified path does not correspond to physical volume attached to
this volume group
lvdisplay: Warning: couldn't query all of the physical volumes.
lssf: Must specify a special_file
usage: lssf special_file ...
save_config: error - unknown disk type for , not SCSI or HPFL
save_config: error - cannot determine root disk
********
Ended Unsuccessfully - Wed Jan 6 06:22:15 2010
********
********
Started - Wed Jan 6 06:30:41 2010
********
make_recovery
/opt/ignite/lbin/list_expander -d
/opt/ignite/lbin/list_expander -d
/opt/ignite/lbin/list_expander -d
/opt/ignite/lbin/list_expander -d -v
WARNING: Could not restore LIF volume.
"/opt/ignite/bin/save_config" -f "/var/opt/ignite/recovery/config.recover" "vg00
lvdisplay: Warning: couldn't query all of the physical volumes.
lvdisplay: Warning: couldn't query physical volume "/dev/dsk/c1t6d0":
The specified path does not correspond to physical volume attached to
this volume group
lvdisplay: Warning: couldn't query all of the physical volumes.
lvdisplay: Warning: couldn't query physical volume "/dev/dsk/c1t6d0":
The specified path does not correspond to physical volume attached to
this volume group
lvdisplay: Warning: couldn't query all of the physical volumes.
lssf: Must specify a special_file
usage: lssf special_file ...
save_config: error - unknown disk type for , not SCSI or HPFL
save_config: error - cannot determine root disk
********
Ended Unsuccessfully - Wed Jan 6 06:31:17 2010
********
#
#
#
#
#
#
#
由于是生产系统,没有备份的话,小弟我不敢更换根盘,现在不知道该怎么办好了,求各位高手大哥帮帮忙啊!感谢感谢! |
|