- 论坛徽章:
- 0
|
syslog报错:
Jan 26 03:07:33 dbserver1 cmcld: Unable to query the health of cluster lock disk /dev/dsk/c7t0d0: Device busy
Jan 26 03:07:33 dbserver1 cmcld: Check device, power, and cables.
Jan 26 03:48:48 dbserver1 EMS [3103]: ------ EMS Event Notification ------ Value: "SERIOUS (4)" for Resource: "/storage/events/disks/default/1_0_12_0_0.0.0" (Threshold: >= " 3") Execute the following command to obtain event details: /opt/resmon/bin/resdata -R 203358216 -r /storage/events/disks/default/1_0_12_0_0.0.0 -n 203358239 -a
Jan 26 04:08:48 dbserver1 cmcld: Unable to query the health of cluster lock disk /dev/dsk/c7t0d0: Device busy
Jan 26 04:08:48 dbserver1 cmcld: Check device, power, and cables.
dbserver1#[</>]/opt/resmon/bin/resdata -R 203358216 -r /storage/events/disks/default/1_0_12_0_0.0.0 -n 203358239 -a
CURRENT MONITOR DATA:
Event Time..........: Tue Jan 26 03:48:48 2010
Severity............: SERIOUS
Monitor.............: disk_em
Event #.............: 100172
System..............: dbserver1
Summary:
Disk at hardware path 1/0/12/0/0.0.0 : Device connectivity or hardware
failure
Description of Error:
The device was not ready to process requests, but the cause is not
reportable.
Probable Cause / Recommended Action:
If the device is a removable medium, this message is informational,
indicating that I/O was attempted when a diskette was not inserted in the
drive. Place a diskette in the drive before trying to use it.
Alternatively, the device may be in a state where it could not process
this, or any, request. Cycle power to the device.
Alternatively, there could be more than one device having the same address
on the SCSI bus. Make all the addresses on the SCSI bus unique.
Alternatively, one or both of the terminators on the SCSI bus may be
missing. Install the terminators in their proper locations at the ends of
the SCSI bus.
Alternatively, the SCSI cable may have become detached from the device.
Re-attach the cable.
Alternatively, the SCSI cable may have failed. Replace it.
Alternatively, if another entry corresponding to this condition appears in
the log for this device, the device has experienced a hardware failure.
Contact your HP support representative to have the device checked.
Additional Event Data:
System IP Address...: 132.32.21.101
Event Id............: 0x4b5df5a000000000
Monitor Version.....: B.01.01
Event Class.........: I/O
Client Configuration File...........:
/var/stm/config/tools/monitor/default_disk_em.clcfg
Client Configuration File Version...: A.01.00
Qualification criteria met.
Number of events..: 1
Associated OS error log entry id(s):
None
Additional System Data:
System Model Number.............: 9000/800/rp7410
OS Version......................: B.11.11
STM Version.....................: A.43.00
EMS Version.....................: A.04.00
Latest information on this event:
http://docs.hp.com/hpux/content/hardware/ems/scsi.htm#100172
v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-v
Component Data:
Physical Device Path...: 1/0/12/0/0.0.0
Device Class...........: Disk
Inquiry Vendor ID......: HP 36.4G
Inquiry Product ID.....: ST336753LC
Firmware Version.......: HPC3
Serial Number..........: 3HX101G400007349WPZ9
Product/Device Identification Information:
Logger ID.........: disc30; sdisk
Product Identifier: Disk
Product Qualifier.: HP 36.4GST336753LC
SCSI Target ID....: 0x00
SCSI LUN..........: 0x00
SCSI Command Data Block:
Command Data Block Contents:
0x0000: 00 00 00 00 00 00
Command Data Block Fields (6-byte fmt):
Command Operation Code...(0x00)..: TEST UNIT READY
Logical Unit Number..............: 0
Hardware Status: (not present in log record).
SCSI Sense Data:
Undecoded Sense Data:
0x0000: 70 00 02 00 00 00 00 0A 00 00 00 00 04 00 02 00
0x0010: 00 00
SCSI Sense Data Fields:
Error Code : 0x70
Segment Number : 0x00
Bit Fields:
Filemark : 0
End-of-Medium : 0
Incorrect Length Indicator : 0
Sense Key : 0x02
Information Field Valid : FALSE
Information Field : 0x00000000
Additional Sense Length : 10
Command Specific : 0x00000000
Additional Sense Code : 0x04
Additional Sense Qualifier : 0x00
Field Replaceable Unit : 0x02
Sense Key Specific Data Valid : FALSE
Sense Key Specific Data : 0x00 0x00 0x00
Sense Key 0x02, NOT READY, indicates that the logical unit addressed
cannot be accessed. Operator intervention may be required to correct
this condition.
The combination of Additional Sense Code and Sense Qualifier (0x0400)
indicates: Logical unit not ready, cause not reportable.
dbserver1#[</>]ioscan -fnkCdisk
Class I H/W Path Driver S/W State H/W Type Description
===========================================================================
disk 0 1/0/0/3/0.6.0 sdisk CLAIMED DEVICE HP 36.4GST336753LC
/dev/dsk/c0t6d0 /dev/rdsk/c0t6d0
disk 1 1/0/0/3/1.2.0 sdisk CLAIMED DEVICE HP DVD-ROM 305
/dev/dsk/c1t2d0 /dev/rdsk/c1t2d0
disk 2 1/0/1/0/0/1/1.6.0 sdisk CLAIMED DEVICE HP 36.4GMAS3367NC
/dev/dsk/c3t6d0 /dev/rdsk/c3t6d0
disk 5 1/0/2/0/0.8.0.108.0.0.0 sdisk CLAIMED DEVICE HP A6189B
/dev/dsk/c5t0d0 /dev/rdsk/c5t0d0
disk 8 1/0/2/0/0.8.0.108.0.0.1 sdisk CLAIMED DEVICE HP A6189B
/dev/dsk/c5t0d1 /dev/rdsk/c5t0d1
disk 9 1/0/2/0/0.8.0.108.0.0.2 sdisk CLAIMED DEVICE HP A6189B
/dev/dsk/c5t0d2 /dev/rdsk/c5t0d2
disk 3 1/0/4/0/0.8.0.110.0.0.0 sdisk CLAIMED DEVICE HP A6189B
/dev/dsk/c4t0d0 /dev/rdsk/c4t0d0
disk 6 1/0/4/0/0.8.0.110.0.0.1 sdisk CLAIMED DEVICE HP A6189B
/dev/dsk/c4t0d1 /dev/rdsk/c4t0d1
disk 7 1/0/4/0/0.8.0.110.0.0.2 sdisk CLAIMED DEVICE HP A6189B
/dev/dsk/c4t0d2 /dev/rdsk/c4t0d2
disk 4 1/0/12/0/0.0.0 sdisk CLAIMED DEVICE HP 36.4GST336753LC
/dev/dsk/c7t0d0 /dev/rdsk/c7t0d0
双机另一节点dbserver2也有一样的报错,麻烦各位帮忙分析下,多谢。
[ 本帖最后由 tonybud 于 2010-1-26 22:24 编辑 ] |
|