- 论坛徽章:
- 0
|
本帖最后由 weidi 于 2010-03-26 11:32 编辑
一台旧CISCO 2610XM 旧路由器, 重写IOS后可以启动,但看不到任何端口信息(以太口和serialf都看不到)
#show version
sco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.0(10), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Mon 20-Mar-00 23:30 by phanguye
Image text-base: 0x80008088, data-base: 0x80600628
ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)
Router uptime is 9 minutes
System restarted by reload
System image file is "flash:c2600-i-mz.120-10.bin"
cisco 2600 (MPC860) processor (revision 0x100) with 26624K/6144K bytes of memory
.
Processor board ID JAD06400HC0 (1058359213)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0. (只看到X.25,下面没有其它接口的信息)32K bytes of non-volatile configuration memory.
#erase ?
nvram: Filesystem to be erased
startup-config Erase contents of configuration memory
想删除flash:后重做, 但没有flash 存在.
我该怎么做,请帮忙,谢谢! |
|