学习笔记（cfgmgr） 写的比较细。难免有问题，请专家指正

ibm6000

加一个cfgmgr -S

ibm6000

看看英文解释吧
There is an undocumented option on cfgmgr in AIX 4.3.3  (At least it’s not in the man pages).  The –S option will run cfgmgr serially!  Although you would not want to twin-tail and use DPO, since that is not supported at the time of this document’s creating, you should know that cfgmgr in AIX 4.3.3 runs in parallel down each SCSI adapter.  Therefore, since the second SCSI adapter could finish earlier than your first SCSI adapter, your disk drives may be in a weird order.  This is usually not a big deal, unless you are doing a rollout of lots of machines that should look exactly alike, or UNLESS you are twin tailing and you want the hdisk numbers to be in the same order on each machine.  In order to force the disk drives to be configured in the order of the scsi adapters, you can remove all of the disk drives and run “cfgmgr –S”.

shadowyang

感谢，大家

ibm6000

cfgmgr -v可以看看在哪一步花的时间最多，是不是有问题。

ufidawb

现在看到了，学习一下啊，呵呵，高手呀！

nicolasch

ding