求助，谁有AIX4.3.3的安装盘。。。。

lxj821028

去verycd.com下载5.2/5.3光盘，上面有这两个版本的下载。

《IBM AIX操作系统》(IBM AIX V5.1)下载地址：
http://www.verycd.com/topics/57242/

《IBM AIX 5.3》(IBM AIX 5.3)下载地址：
http://www.verycd.com/topics/124865/

《IBM 操作系统》(IBM AIX v6.1)下载地址：
http://www.verycd.com/topics/388980/


安装5.3版本的，可能需要升级机器微码，你需要参考下IBM官网上的说明。

http://www14.software.ibm.com/we ... =1&mtm=7044-170

http://download.boulder.ibm.com/ ... mware/7044x70F.html


Table 2.1:  System Firmware Update Descriptions and History

SPH05195
Added support for the FAT-16 file system.
Added support for ARP (address request protocol).
On the IBM10/100 Mbps Ethernet PCI adapter (FC 269, the default network settings were changed to auto,auto.

SPH04194
Added support for AIX 5.3.
Corrected problem with auto negotiation at 10/100 speeds for 10/100/1000 Base-T Ethernet PCI Adapter (FC 2975).
GUI SMS menus replaced with text based menus.
Enhancements to SMS network adapter menus to resolve various configuration issues and ping test failures.
Added support for PCI-X Dual Channel Ultra 320 SCSI RAID Adapter (FC 5703).
Added remote IPL support in GUI SMS settings menu for 10/100 Mbps Ethernet PCI Adapter II (FC 4962).
Added support to provide response to APR requests for Hot Standby Router Protocol (HSRP) or other network processes that generate ARP requests during NIM operations.

SPH03232
Resolves ethernet adapter link errors reported in AIX error log during boot on systems equipped with IBM 4-Port 10/100 Ethernet Adapter (FC 4951), IBM Universal 4-Port 10/100 Ethernet Adapter (FC 4961) or integrated adapters based on these adapter types.
Added enhancements to prevent potential ping and NIM boot failures on SP and Cluster attached servers.

SPH03114
Corrected boot failure with checkpoint E1F6 displayed after bootlist is set via AIX and more than 5 devices are specified.
Parameter change to limit bootlist entries set via AIX to 5.
Corrected boot failure with 'Default Catch' message displayed on console when booting from tape media containing large boot image.
Corrected error 20EE000B: unable to find boot record after restore on NIM install on 36GB or larger disks.
Corrected 'Default Catch' message displayed on console after SMS 'Change SCSI ID' utility screen is accessed.

small_cat524

ROM Level.(alterable).......sh040616
        ROM Level.(alterable).......SPH05195
        ROM Level.(non-alterable)...01

small_cat524

微码已经升级了，但还是报0518 unknow boot fs,我这有5.1的正版盘也是报这个错。有人说是光驱的问题，可是能在系统下MOUNT，也能读盘，这是怎么回事呢？请大家都帮我诊断一下。

windblow

lz你用的什么硬盘，我没加硬盘之前一切正常，加了两块希捷的ultra320高速硬盘后就出现了和你一样的问题。把这两块硬盘拔掉，光盘又能正常引导了。我分析应该是高速硬盘和低速光驱设备在同一条线缆上造成干扰，光驱运作不正常就不能引导了。
机器的原装硬盘是低速的硬盘，你可以只连接原装硬盘和光驱试试看。如果买来的机器没有原装硬盘了，那你就换块低速的硬盘。
现在能买到的硬盘有ultra2,ultra160,ultra320的，越老越不好买。如果用ultra2的，相信你的问题一定能解决，ultra160估计也可以，不过没试过。但是看你的情况我感觉很大可能你连接了ultra320的硬盘。

windblow

我拆下了我的原装硬盘，标签上标明是ultra3的硬盘。所以，应该ultra3的68针硬盘接在170上都没问题，
而ultra320的硬盘接上后就会出现楼主的问题。请楼主看到回帖后回复一下，看你的硬盘是不是ultra320的？

lantian728

换张安装盘试试呗