- 论坛徽章:
- 0
|
>------------ Event Monitoring Service Event Notification ------------<
Notification Time: Sun Jun 13 22:56:00 2010
test sent Event Monitor notification information:
/storage/events/disks/default/0_1_1_0.1.0 is >= 1.
Its current value is CRITICAL(5).
Event data from monitor:
Event Time..........: Sun Jun 13 22:56:00 2010
Severity............: CRITICAL
Monitor.............: disk_em
Event #.............: 18
System..............: test
Summary:
Disk at hardware path 0/1/1/0.1.0 : Drive is not responding.
Description of Error:
The hardware did not respond to the request by the driver. The I/O request
was not completed.
Probable Cause / Recommended Action:
The I/O request that the monitor made to this device failed because the
device timed-out. Check cables, power supply, ensure the drive is powered
ON, and if needed contact your HP support representative to check the
drive.
Additional Event Data:
System IP Address...: 10.0.0.2
System IP Address...: 172.16.10.2
Event Id............: 0x4c14f18000000000
Monitor Version.....: B.01.01
Event Class.........: I/O
Client Configuration File...........:
/var/stm/config/tools/monitor/default_disk_em.clcfg
Client Configuration File Version...: A.01.00
Qualification criteria met.
Number of events..: 1
Associated OS error log entry id(s):
0x4c14f18000000000
Additional System Data:
System Model Number.............: ia64 hp SERVER RX4640
OS Version......................: B.11.23
STM Version.....................: C.53.00
EMS Version.....................: A.04.20
Latest information on this event:
http://docs.hp.com/hpux/content/hardware/ems/disk_em.htm#18
v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-v
Component Data:
Physical Device Path...: 0/1/1/0.1.0
Device Class...........: Disk
Inquiry Vendor ID......: HP 73.4G
Inquiry Product ID.....: MAX3073NC
Firmware Version.......: HPC1
Serial Number..........: X1024119 0626
Product/Device Identification Information:
Logger ID.........: sdisk
Product Identifier: SCSI Disk
Product Qualifier.: HP73.4GMAX3073NC
SCSI Target ID....: 0x01
SCSI LUN..........: 0x00
I/O Log Event Data:
Driver Status Code..................: 0x0000007E
Length of Logged Hardware Status....: 4 bytes.
Offset to Logged Manager Information: 8 bytes.
Length of Logged Manager Information: 34 bytes.
SCSI Command Data Block:
Command Data Block Contents:
0x0000: 28 00 00 0F A0 32 00 00 02 00
Command Data Block Fields (10-byte fmt):
Command Operation Code...(0x2 ..: READ
Logical Unit Number..............: 0
DPO Bit..........................: 0
FUA Bit..........................: 0
Relative Address Bit.............: 0
Logical Block Address............: 1024050 (0x000FA032)
Transfer Length..................: 2 (0x0002)
Manager-Specific Data Fields:
Request ID.............: 0x02CAB16C
Data Residue...........: 0x00000400
CDB status.............: 0x00000200
Sense Status...........: 0x00000000
Bus ID.................: 0x02
Target ID..............: 0x01
LUN ID.................: 0x00
Sense Data Length......: 0x00
Q Tag..................: 0xF7
Retry Count............: 0
>---------- End Event Monitoring Service Event Notification ----------<
不知是不是坏了， |
|
免费注册
发表于 2010-07-06 09:47
发表于 2010-07-06 15:12
