误操作 t5440 solaris 10 ctrl+break 后故障

cuijun21cn

回复 9# doging

大哥，，那个-v是啥意思，有些激动。。嘎嘎。

doging

-v详细模式

cuijun21cn

呃，，杯具了，我之前另一台机器跟这个配置是一样的。那台上面的显示如下：
tycg11:/-# eeprom boot-device
boot-device=raiddisk0:a raiddisk1:a
tycg11:/-#

可这个用这个就是启不来，能帮分析下原因吗？总算启来了，非常感谢。

doging

呃，，杯具了，我之前另一台机器跟这个配置是一样的。那台上面的显示如下：
tycg11:/-# eeprom boot-devic ...
cuijun21cn 发表于 2010-07-12 10:04

  共享一下过程{:3_187:}

cuijun21cn

这种启法，我的虚拟网卡也启来了，上次的启法就没起来，呵呵，我想研究下是啥原因。
我发一下上次启来的情况：

Unit 0   Disk     Adaptec RAID ASR5805    V1.0    1755295745 Blocks, 898 GB

/pci@400/pci@0/pci@9/LSILogic,sas@0

MPT Version 1.05, Firmware Version 1.26.00.00


/pci@400/pci@0/pci@8/scsi@0

MPT Version 1.05, Firmware Version 1.27.00.00


/pci@400/pci@0/pci@1/pci@0/usb@0,2/hub@4/storage@4
  Unit 0   Removable Read Only device    TSSTcorpCD/DVDW TS-T632ASR03

{0} ok
{0} ok boot      /pci@500/pci@0/pci@9/scsi@0/disk@0,0





Netra T5440, No Keyboard
Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.30.1, 65312 MB memory available, Serial #89673374.
Ethernet address 0:21:28:58:4e:9e, Host ID: 85584e9e.



Boot device: /pci@500/pci@0/pci@9/scsi@0/disk@0,0  File and args:
Waiting for AAC Controller to start: . . . . . Started

SunOS Release 5.10 Version Generic_141414-02 64-bit
Copyright 1983-2009 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
NOTICE: nxge0: xcvr addr:0x1d - link is down
NOTICE: nxge1: xcvr addr:0x1c - link is down
NOTICE: nxge2: xcvr addr:0x1b - link is down
NOTICE: nxge1: xcvr addr:0x1c - link is up 100 Mbps full duplex
NOTICE: nxge5: xcvr addr:0x0c - link is down
NOTICE: nxge0: xcvr addr:0x1d - link is up 1000 Mbps full duplex
NOTICE: nxge2: xcvr addr:0x1b - link is up 100 Mbps full duplex
NOTICE: nxge6: xcvr addr:0x0b - link is down
NOTICE: nxge5: xcvr addr:0x0c - link is up 100 Mbps full duplex
NOTICE: nxge7: xcvr addr:0x0a - link is down
NOTICE: nxge6: xcvr addr:0x0b - link is up 100 Mbps full duplex
Hostname: tycg12
NOTICE: nxge7: xcvr addr:0x0a - link is up 1000 Mbps full duplex
The / file system (/dev/md/rdsk/d35) is being checked.
Alcatel-Lucent MAS Boot Disk Version 11.4 (SunOS 5.10)
Cannot stat /dev/rdsk/c4t0d1s0 - ignoring
Reading ZFS config: done.
syslogd: /sn/log/vendorlog/TimesTenLog: No such file or directory

cuijun21cn

回复 14# doging

这机器是这样的，是我们公司工厂那边预装好的系统，目前手册也没有，到我这里了，这些都已经安装完成，我是在上面调应用的，结果调出问题，想进OK模式，就出现主题中的情况。呵呵。。

cuijun21cn

回复 14# doging


    不过，如果就这个问题，我们追根问底，需要取哪些LOG发上来，我可以现在来取。我想把此问题搞清楚，然后整理成文档，给部门同事以后分享。

doging

Boot device: /pci@500/pci@0/pci@9/scsi@0/disk@0,0  File and args:
Waiting for AAC Controller to start: . . . . . Started


这个信息就可以了，说明楼主的机器安装了额外的scsi卡，而没有使用内置scsi芯片

由于默认disk0、disk1指向内置硬盘，所以boot disk0/disk1会失败


boot 绝对路径就正常了

cuijun21cn

回复 18# doging

非常感谢你的指导，我自己也来分析下原因。

cuijun21cn

回复 18# doging

哥们，问下：
/pci@500/pci@0/pci@9/scsi@0/disk@0,0
和/pci@500/pci@0/pci@9/scsi@0/disk@0
和/pci@500/pci@0/pci@9/scsi@0/sd0,0

有什么区别？