- 论坛徽章:
- 0
|
如题:
用户NETAPP 上个月发现坏了两块电源,后来发现电源也坏了一块,管理IPPING 不同,串口进去发现系统起不来,今天到用户现场换了电源 电源告警没有了。但是系统还是起不来,有以下主要提示,请高手指教:
pecial boot options menu will be available.
ispfc: Fibre Channel adapter 0c appears to be unattached/disconnected.
If adapter is in use, check cabling and if connected to disk
shelves, also check seating of LRC cards.
Thu Jan 1 00:00:24 GMT [ispfc_init_1:error]: Initialization
nnel adapter 0c.
NetApp Release 6.5.2R1: Wed Sep 8 15:58:37 PDT 2004
Copyright (c) 1992-2004 Network Appliance, Inc.
Starting boot on Wed Dec 31 23:59:58 GMT 1969
Thu Jan 1 00:00:29 GMT [diskown.errorReadingOwnership:warning]: error 19 while
reading ownership on disk 0b.22 (S/N 41623835)
Thu Jan 1 00:00:29 GMT [diskown.errorDuringIO:error]: error 19 (disk not ready
for requested operation) on disk 0b.22 (S/N 41623835) while reading individual d
isk ownership area
Thu Jan 1 00:00:42 GMT [diskown.errorReading
reading ownership on disk 0b.18 (S/N )
Thu Jan 1 00:00:42 GMT [diskown.errorDuringIO:error]: error 19 (disk not ready
for requested operation) on disk 0b.18 (S/N ) while reading individual disk owne
rship area
Thu Jan 1 00:00:43 GMT [monitor.power.degraded:CRITICAL]: Power supply is in de
graded mode: sensor PSU 2 Fan 1
(1) Normal boot.
(2) Boot without /etc/rc.
(3) Change password.
(4) Initialize all disks.
(5) Maintenance mode boot.
Selection (1-5)? 1
Thu Jan 1 00:00:49 GMT [fmmbx_instanceWorke:info]: Disk
box disk
Thu Jan 1 00:00:49 GMT [fmmbx_instanceWorke:info]: Disk 0b.16 is a primary mail
box disk
Thu Jan 1 00:00:50 GMT [fmmbx_instanceWorke:info]: normal mailbox instance on p
rimary side
Thu Jan 1 00:00:50 GMT [raid.label.io.readError:error]: Label read on Disk 0b.2
2 Shelf ? Bay ? [NETAPP X272_HJURE073F10 NA13] S/N [41623835] failed with stor
age error disk failed. The system will stop using the disk for I/O operations.
Thu Jan 1 00:00:50 GMT [raid.assim.disk.brokenPreAssim:error]: Broken Disk 0b.2
3 Shelf ? Bay ? [NETAPP X272_HJURE073F10 NA13] S/N [41888194] detected prior t
o assimilation. It should be removed.
WARNING: The NVRAM battery currently has a charge of 3623 mV
WARNING: The battery voltage is too low to hold data for
3 days during a power-out condition.
The charger is now turned on.
When the voltage is ok the boot process will
complete and services will be engaged.
To override this delay, press CTRL-C.
WARNING: The battery voltage is too l
3 days during a power-out condition.
The charger is now turned on.
When the voltage is ok the boot process will
complete and services will be engaged.
To override this delay, press CTRL-C.
Thu Jan 1 00:00:50 GMT [nvram.bat.error:CRITICAL]: The NVRAM battery in the cha
ssis is *degraded*
CAUTION: Using this appliance without NVRAM
battery backup coupled with a power
failure condition CAN CAUSE DATA LOSS.
Are you sure you want to continue (y or n
Thu Jan 1 00:01:42 GMT [nvram.bat.error:CRITICAL]: The NVRAM battery in the cha
ssis is *not safe to boot. Delay for charging canceled by user. Charger is ON *
Thu Jan 1 00:01:43 GMT [raid.cksum.replay.summary:info]: Replayed 0 checksum bl
ocks.
Thu Jan 1 00:01:43 GMT [raid.stripe.replay.summary:info]: Replayed 0 stripes.
PANIC: No root volume found in process rc on release NetApp Release 6.5.2R1 on T
hu Jan 1 00:01:43 GMT 1970
version: NetApp Release 6.5.2R1: Wed Sep 8 15:58:37 PDT 2004
cc flags: 6O
DUMPCORE: START
DUMPCORE: END -- coredump *NOT* written.
halt after panic during system?
CFE version 1.2.0 based on Broadcom CFE: 1.0.35
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Portions Copyright (C) 2002,2003 Network Appliance Corporation.
CPU type 0x1040102: 600MHz
Total memory: 0x20000000 bytes (512MB)
Starting AUTOBOOT press any key to abort...
Loading: 0xffffffff80001000/8745912 Entry at 0xffffffff80001000
Starting program at 0xffffffff80001000
Press CTRL-C for special boot menu
................................................................................
................................................................................
................................................................................
................................................................................
...........................................................
ispfc: Fibre Channel adapter 0c appears to be unattached/disconnected.
If adapter is in use, check cabling and if connected
shelves, also check seating of LRC cards.
Thu Jan 1 00:00:24 GMT [ispfc_init_1:error]: Initialization failed on Fibre Cha
nnel adapter 0c.
NetApp Release 6.5.2R1: Wed Sep 8 15:58:37 PDT 2004
Copyright (c) 1992-2004 Network Appliance, Inc.
Starting boot on Wed Dec 31 23:59:58 GMT 1969
Thu Jan 1 00:00:29 GMT [diskown.errorReadingOwnership:warning]: error 19 while
reading ownership on disk 0b.22 (S/N 41623835)
Thu Jan 1 00:00:29 GMT [diskown.errorDuringIO:error]: error 19 (disk not ready
for requested operation) on disk 0b.22 (S/N 41623835) while reading individual d
isk ownership area
Thu Jan 1 00:00:56 GMT [diskown.errorReadingOwnership:warning]: error 19 while
reading ownership on disk 0b.18 (S/N )
Thu Jan 1 00:00:56 GMT [diskown.errorDuringIO:error]: error 19 (disk not ready
for requested operation) on disk 0b.18 (S/N ) while reading individual disk owne
rship area
Thu Jan 1 00:00:56 GMT [monitor.power.degraded:CRITICAL]: Power supply is in de
graded mode: sensor PSU 2 Fan 1
Thu Jan 1 00:00:59 GMT [fmmbx_instanceWorke:info]: Disk 0b.17 is a primary mail
box disk
Thu Jan 1 00:00:59 GMT [fmmbx_instanceWorke:info]: Disk 0b.16 is a primary mail
box disk
Thu Jan 1 00:00:59 GMT [fmmbx_instanceWorke:info]: normal mailbox instance on p
rimary side
Thu Jan 1 00:00:59 GMT [raid.label.io.readError:error]: Label read on Disk 0b.2
2 Shelf ? Bay ? [NETAPP X272_HJURE073F10 NA13] S/N [41623835] failed with stor
age error disk failed. The system will stop using the disk for I/O operations.
Thu Jan 1 00:01:00 GMT [raid.assim.disk.brokenPreAssim:error]: Broken Disk 0b.2
3 Shelf ? Bay ? [NETAPP X272_HJURE073F10 NA13] S/N [41888194] detected prior t
o assimilation. It should be removed.
WARNING: The NVRAM battery currently has a charge of 3623 mV
WARNING: The battery voltage is too low to hold data for
3 days during a power-out condition.
The charger is now turned on.
When the voltage is ok the boot process will
complete and services will be engaged.
To override this delay, press CTRL-C.
Thu Jan 1 00:01:00 GMT [nvram.bat.error:CRITICAL]: The NVRAM battery in the cha
ssis is *degraded*
WARNING: The battery voltage is too low to hold data for
3 days during a power-out condition.
The charger is now turned on.
When the voltage is ok the boot process will
complete and services will be engaged.
To override this delay, press CTRL-C.
CAUTION: Using this appliance without NVRAM
battery backup cou
failure condition CAN CAUSE DATA LOSS.
Are you sure you want to continue (y or n)? n
WARNING: The battery voltage is too low to hold data for
3 days during a power-out condition.
The charger is now turned on.
When the voltage is ok the boot process will
complete and services will be engaged.
To override this delay, press CTRL-C. |
|