求助：单网卡的机器做cluster遇到问题，帮忙看看

淡定再淡定

root@node1 # more release
                       Solaris 10 10/09 s10x_u8wos_08a X86
           Copyright 2009 Sun Microsystems, Inc.  All Rights Reserved.
                        Use is subject to license terms.
                           Assembled 16 September 2009
root@node1 #

机器只有一个网卡，虚拟了一个

root@node1 # ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 10.101.5.80 netmask fffff800 broadcast 10.101.7.255
        ether 0:7:e9:4f:17:c6
e1000g0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 10.101.5.81 netmask fffff800 broadcast 10.101.7.255
root@node1 #


scinstall的时候

  >>> Cluster Transport Adapters and Cables <<<

    You must configure the cluster transport adapters for each node in the
    cluster. These are the adapters which attach to the private cluster
    interconnect.

    What is the name of the first cluster transport adapter?  e1000g0  

Adapter "e1000g0" is already in use as a public network adapter.

    What is the name of the first cluster transport adapter?  e1000g0:1  

Invalid adapter name.

    What is the name of the first cluster transport adapter?  e1000g0

Adapter "e1000g0" is already in use as a public network adapter.

    What is the name of the first cluster transport adapter?  e1000g0\:1

Invalid adapter name.


这里要这么设置呢？难道必须要两个以上的物理网卡？  谢谢

zhmzhouming

这样的addif出来的是肯定不行的。

用scinstall的时候都会让你去输入两个心跳网卡名字，还有一个业务IP没提（做IPMP的话要两个网卡）

淡定再淡定

这样的addif出来的是肯定不行的。

用scinstall的时候都会让你去输入两个心跳网卡名字，还有一个业务IP没 ...
zhmzhouming 发表于 2010-07-19 17:45

    多谢


    测试机，学习用的。不做IPMP（没那么多网卡），最少每个机器配2个物理网卡，这样可以吗{:3_190:}

zhmzhouming

不行吧  得三个网卡吧 两个心跳 一个业务

dskedou

进来学习下。单网卡怎么做……

淡定再淡定

不行吧  得三个网卡吧 两个心跳 一个业务
zhmzhouming 发表于 2010-07-19 18:09

    至少得三个物理网卡啊 {:3_190:}

doging

单网可以配置节点cluster，呵呵

淡定再淡定

单网可以配置节点cluster，呵呵
doging 发表于 2010-07-20 09:26

    {:3_187:}   这里该这么设置呢？麻烦指导一下，谢谢



>>> Cluster Transport Adapters and Cables <<<

    You must configure the cluster transport adapters for each node in the
    cluster. These are the adapters which attach to the private cluster
    interconnect.

    What is the name of the first cluster transport adapter?  e1000g0  

Adapter "e1000g0" is already in use as a public network adapter.

    What is the name of the first cluster transport adapter?  e1000g0:1  

Invalid adapter name.

    What is the name of the first cluster transport adapter?  e1000g0

Adapter "e1000g0" is already in use as a public network adapter.

    What is the name of the first cluster transport adapter?  e1000g0\:1

Invalid adapter name.

doging

回复 8# 淡定再淡定


    scinstall选择主机时，只写一个节点名

淡定再淡定

回复  淡定再淡定


    scinstall选择主机时，只写一个节点名
doging 发表于 2010-07-20 11:37

    是这样做的啊，node1做scinstall的时候，只输入node2，还是不行啊 {:3_184:}